INA122P vs INA126PA مقایسه
مقایسه دقیق کنار به کنار INA122P توسط Texas Instruments و INA126PA توسط Texas Instruments. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
مقایسه مشخصات
| پارامتر | INA122P | INA126PA |
|---|---|---|
| برند | Texas Instruments | Texas Instruments |
| دسته‌بندی | Amplifier ICs | Amplifier ICs |
| وضعیت چرخه عمر | فعال | Obsolete |
| Product Type | Precision instrumentation amplifier | — |
| Architecture | Two-op-amp design | Two-operating-amplifier instrumentation amplifier |
| جریان سکون | 60 µA | 175 µA per channel |
| Supply Voltage Range | 2.2 V to 36 V | ±1.35 V to ±18 V |
| Dual-Supply Range | ±18 V | — |
| Common-Mode Range | V− − 0.1 V | — |
| Output Swing | Rail-to-rail | — |
| Low Offset Voltage | 250 µV maximum | — |
| Low Offset Drift | 3 µV/°C maximum | — |
| Circuit Count | 1 circuit | — |
| بسته‌بندی | 8-pin plastic DIP (8-PDIP) | 8-pin PDIP |
| نوع نصب | Through-hole | Through-hole |
| دمای کاری | −40 °C to +85 °C | — |
| Application Category | Portable medical and data-acquisition instrumentation | — |
| Signal Type | Differential | — |
| وضعیت RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | unknown | — |
| Device Type | — | Single-channel precision instrumentation amplifier |
| Maximum Supply Voltage | — | 36 V |
| Minimum Total Supply Voltage | — | 2.7 V |
| Input Offset Voltage | — | 250 µV |
| Gain Range | — | 1 V/V to 1000 V/V |
| Small-Signal Bandwidth | — | 200 kHz |
| Slew Rate | — | 0.04 V/µs |
| Number of Amplifiers | — | 1 circuit |
| محدوده دمای کاری | — | [DATA_NEEDED: operating temperature range] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Gain-Setting Resistance | — | [DATA_NEEDED: gain-setting resistance] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |