INA126PA vs INA122P Comparação
Comparação detalhada lado a lado de INA126PA por Texas Instruments e INA122P por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | INA126PA | INA122P |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Amplifier ICs | Amplifier ICs |
| Status do ciclo de vida | Obsolete | Ativo |
| Device Type | Single-channel precision instrumentation amplifier | — |
| Maximum Supply Voltage | 36 V | — |
| Supply Voltage Range | ±1.35 V to ±18 V | 2.2 V to 36 V |
| Minimum Total Supply Voltage | 2.7 V | — |
| Corrente de repouso | 175 µA per channel | 60 µA |
| Input Offset Voltage | 250 µV | — |
| Architecture | Two-operating-amplifier instrumentation amplifier | Two-op-amp design |
| Gain Range | 1 V/V to 1000 V/V | — |
| Small-Signal Bandwidth | 200 kHz | — |
| Slew Rate | 0.04 V/µs | — |
| Number of Amplifiers | 1 circuit | — |
| Encapsulamento | 8-pin PDIP | 8-pin plastic DIP (8-PDIP) |
| Tipo de montagem | Through-hole | Through-hole |
| Faixa de temperatura de operação | [DATA_NEEDED: operating temperature range] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Gain-Setting Resistance | [DATA_NEEDED: gain-setting resistance] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Product Type | — | Precision instrumentation amplifier |
| Dual-Supply Range | — | ±18 V |
| Common-Mode Range | — | V− − 0.1 V |
| Output Swing | — | Rail-to-rail |
| Low Offset Voltage | — | 250 µV maximum |
| Low Offset Drift | — | 3 µV/°C maximum |
| Circuit Count | — | 1 circuit |
| Temperatura de operação | — | −40 °C to +85 °C |
| Application Category | — | Portable medical and data-acquisition instrumentation |
| Signal Type | — | Differential |
| AEC-Q100 Qualification | — | unknown |