INA126PA vs INA122P 对比
详细并排对比 INA126PA 出自 Texas Instruments 和 INA122P 出自 Texas Instruments。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
规格对比
| 参数 | INA126PA | INA122P |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 分类 | Amplifier ICs | Amplifier ICs |
| 生命周期状态 | Obsolete | 有效 |
| Device Type | Single-channel precision instrumentation amplifier | — |
| Maximum Supply Voltage | 36 V | — |
| Supply Voltage Range | ±1.35 V to ±18 V | 2.2 V to 36 V |
| Minimum Total Supply Voltage | 2.7 V | — |
| 静态电流 | 175 µA per channel | 60 µA |
| Input Offset Voltage | 250 µV | — |
| Architecture | Two-operating-amplifier instrumentation amplifier | Two-op-amp design |
| Gain Range | 1 V/V to 1000 V/V | — |
| Small-Signal Bandwidth | 200 kHz | — |
| Slew Rate | 0.04 V/µs | — |
| Number of Amplifiers | 1 circuit | — |
| 封装 | 8-pin PDIP | 8-pin plastic DIP (8-PDIP) |
| 安装类型 | Through-hole | Through-hole |
| 工作温度范围 | [DATA_NEEDED: operating temperature range] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Gain-Setting Resistance | [DATA_NEEDED: gain-setting resistance] | — |
| RoHS 状态 | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Product Type | — | Precision instrumentation amplifier |
| Dual-Supply Range | — | ±18 V |
| Common-Mode Range | — | V− − 0.1 V |
| Output Swing | — | Rail-to-rail |
| Low Offset Voltage | — | 250 µV maximum |
| Low Offset Drift | — | 3 µV/°C maximum |
| Circuit Count | — | 1 circuit |
| 工作温度 | — | −40 °C to +85 °C |
| Application Category | — | Portable medical and data-acquisition instrumentation |
| Signal Type | — | Differential |
| AEC-Q100 Qualification | — | unknown |