MAX1480AEPI+ vs MAX1480EAEPI+ Comparação
Comparação detalhada lado a lado de MAX1480AEPI+ por Analog Devices e MAX1480EAEPI+ por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Analog Devices
MAX1480AEPI+ - Isolated RS-485/RS-422 Transceiver | Analog Devices
MAX1480AEPI+ ✓ AtivoAnalog Devices
MAX1480EAEPI+ - Isolated RS-485/RS-422 Transceiver | Analog Devices
MAX1480EAEPI+ ✓ AtivoComparação de especificações
| Parâmetro | MAX1480AEPI+ | MAX1480EAEPI+ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | Isolated RS-485/RS-422 transceiver | Isolated RS-485/RS-422 transceiver |
| Transmitter and Receiver Count | 1 transmitter and 1 receiver | — |
| Duplex Mode | Half-duplex | — |
| Taxa de dados | 250 kbps | — |
| Supported Interfaces | RS-485 and RS-422 | — |
| Tensão de alimentação | +5 V on the logic side | — |
| Isolation Architecture | Electrically isolated | — |
| Encapsulamento | 28-pin PDIP, 0.600 inch, 15.24 mm | 28-pin plastic DIP (28-PDIP) |
| Estilo de montagem | Through-hole | — |
| Logic-Side Supply Architecture | Single +5 V supply powers both sides of the interface | — |
| Application | Automated test equipment, HVAC and building-control networks, industrial control, local-area networks, and isolated EMI-sensitive data interfaces | — |
| Manufacturer Family | MAX1480A/B/C | — |
| Available Package Configuration | 28-pin DIP | — |
| Faixa de temperatura de operação | [DATA_NEEDED: operating temperature range] | 0°C to +70°C |
| Isolation Voltage Rating | [DATA_NEEDED: isolation voltage rating] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Driver and Receiver Configuration | — | 1 driver and 1 receiver |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| ESD Protection | — | ±15 kV |
| Isolation | — | Single-side power isolation |
| Receiver Fail-Safe Circuit | — | Supported |
| Standby Mode | — | Low-power standby |
| Total Pin Count | — | 28 pins |
| Tipo de montagem | — | Through-hole |
| Supported Standards | — | RS-485 and RS-422 |
| Logic and Bus Isolation | — | Electrically isolated |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |