MAX1480AEPI+ vs MAX1480EAEPI+ So sánh

So sánh chi tiết song song của MAX1480AEPI+ bằng Analog Devices và MAX1480EAEPI+ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
MAX1480AEPI+ MAX1480AEPI+ - Isolated RS-485/RS-422 Transceiver | Analog Devices

MAX1480AEPI+ - Isolated RS-485/RS-422 Transceiver | Analog Devices

MAX1480AEPI+ ✓ Hoạt động
Analog Devices
MAX1480EAEPI+ MAX1480EAEPI+ - Isolated RS-485/RS-422 Transceiver | Analog Devices

MAX1480EAEPI+ - Isolated RS-485/RS-422 Transceiver | Analog Devices

MAX1480EAEPI+ ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MAX1480AEPI+ MAX1480EAEPI+
Thương hiệu Analog Devices Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Isolated RS-485/RS-422 transceiver Isolated RS-485/RS-422 transceiver
Transmitter and Receiver Count 1 transmitter and 1 receiver —
Duplex Mode Half-duplex —
Tốc độ dữ liệu 250 kbps —
Supported Interfaces RS-485 and RS-422 —
Điện áp cung cấp +5 V on the logic side —
Isolation Architecture Electrically isolated —
Hộp 28-pin PDIP, 0.600 inch, 15.24 mm 28-pin plastic DIP (28-PDIP)
Kiểu lắp đặt Through-hole —
Logic-Side Supply Architecture Single +5 V supply powers both sides of the interface —
Application Automated test equipment, HVAC and building-control networks, industrial control, local-area networks, and isolated EMI-sensitive data interfaces —
Manufacturer Family MAX1480A/B/C —
Available Package Configuration 28-pin DIP —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] 0°C to +70°C
Isolation Voltage Rating [DATA_NEEDED: isolation voltage rating] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
Driver and Receiver Configuration — 1 driver and 1 receiver
Supply Voltage Range — 4.5 V to 5.5 V
ESD Protection — ±15 kV
Isolation — Single-side power isolation
Receiver Fail-Safe Circuit — Supported
Standby Mode — Low-power standby
Total Pin Count — 28 pins
Kiểu lắp đặt — Through-hole
Supported Standards — RS-485 and RS-422
Logic and Bus Isolation — Electrically isolated
REACH Status — [DATA_NEEDED: REACH status]
Lead-Free Status — [DATA_NEEDED: lead-free status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá