MAX232DWRE4 vs MAX232CSE+ Comparação
Comparação detalhada lado a lado de MAX232DWRE4 por Texas Instruments e MAX232CSE+ por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | MAX232DWRE4 | MAX232CSE+ |
|---|---|---|
| Marca | Texas Instruments | Analog Devices |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | Dual EIA-232 driver and receiver transceiver | Dual RS-232 Transceiver |
| Number of Drivers | 2 drivers | 2 |
| Number of Receivers | 2 receivers | 2 |
| Tensão de alimentação | 5 V | — |
| Maximum Data Rate | 120 kbit/s | — |
| RS-232 Input Levels | ±30 V | — |
| Charge-Pump Capacitor | 1.0 µF | — |
| Typical Supply Current | 8 mA | — |
| Recommended Interface | V.28 | — |
| ESD Protection | Exceeds JESD-2000-V human-body-model protection | — |
| Duplex Operation | Full duplex | — |
| Encapsulamento | 16-pin SOIC, 7.50 mm width | 16-SOIC narrow |
| Tipo de montagem | Surface mount | Surface mount |
| Temperatura de operação | [DATA_NEEDED: Operating temperature range] | — |
| Corrente de alimentação | 8 mA typical | — |
| Status RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| Lead-Free Status | unknown | [DATA_NEEDED: lead-free status] |
| Interface Standard | — | EIA/TIA-232E, V.28, V.24 |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Transceiver Configuration | — | 2/2 Full RS-232 |
| Contagem de pinos | — | 16 pins |
| Technology | — | CMOS |
| Charge Pump | — | On-chip voltage converter |
| Supply Polarity | — | Single positive supply |
| Faixa de temperatura de operação | — | [DATA_NEEDED: operating temperature range] |
| Operating Temperature Grade | — | [DATA_NEEDED: commercial or industrial temperature grade] |
| Driver Slew Rate | — | [DATA_NEEDED: driver slew rate] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |