MAX232DWRE4 vs MAX232CSE+ So sánh
So sánh chi tiết song song của MAX232DWRE4 bằng Texas Instruments và MAX232CSE+ bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Analog Devices
MAX232CSE+ - Dual RS-232 Transceiver, 16-SOIC | Analog Devices
MAX232CSE+ ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | MAX232DWRE4 | MAX232CSE+ |
|---|---|---|
| Thương hiệu | Texas Instruments | Analog Devices |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | Dual EIA-232 driver and receiver transceiver | Dual RS-232 Transceiver |
| Number of Drivers | 2 drivers | 2 |
| Number of Receivers | 2 receivers | 2 |
| Điện áp cung cấp | 5 V | — |
| Maximum Data Rate | 120 kbit/s | — |
| RS-232 Input Levels | ±30 V | — |
| Charge-Pump Capacitor | 1.0 µF | — |
| Typical Supply Current | 8 mA | — |
| Recommended Interface | V.28 | — |
| ESD Protection | Exceeds JESD-2000-V human-body-model protection | — |
| Duplex Operation | Full duplex | — |
| Hộp | 16-pin SOIC, 7.50 mm width | 16-SOIC narrow |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Nhiệt độ hoạt động | [DATA_NEEDED: Operating temperature range] | — |
| Điện áp cung cấp | 8 mA typical | — |
| Trạng thái RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| Lead-Free Status | unknown | [DATA_NEEDED: lead-free status] |
| Interface Standard | — | EIA/TIA-232E, V.28, V.24 |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Transceiver Configuration | — | 2/2 Full RS-232 |
| Số chân | — | 16 pins |
| Technology | — | CMOS |
| Charge Pump | — | On-chip voltage converter |
| Supply Polarity | — | Single positive supply |
| Khoảng nhiệt độ hoạt động | — | [DATA_NEEDED: operating temperature range] |
| Operating Temperature Grade | — | [DATA_NEEDED: commercial or industrial temperature grade] |
| Driver Slew Rate | — | [DATA_NEEDED: driver slew rate] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |