MK64FN1M0VLL12 vs MK24FN1M0VLL12 Comparação
Comparação detalhada lado a lado de MK64FN1M0VLL12 por NXP Semiconductors e MK24FN1M0VLL12 por NXP Semiconductors. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
NXP Semiconductors
MK64FN1M0VLL12 - K64 120MHz Cortex-M4F MCU 1MB Flash | NXP
MK64FN1M0VLL12 ✓ AtivoComparação de especificações
| Parâmetro | MK64FN1M0VLL12 | MK24FN1M0VLL12 |
|---|---|---|
| Marca | NXP Semiconductors | NXP Semiconductors |
| Categoria | Microcontrollers | Microcontrollers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $7,95 | $8,95 |
| Manufacturer | NXP Semiconductors | — |
| Series | Kinetis K64 | — |
| Core Processor | ARM Cortex-M4F (with FPU and DSP) | — |
| Core Size | 32-bit | — |
| Maximum CPU Frequency | 120 MHz | 120 MHz |
| Program Memory Size | 1 MB (1M x 8) Flash | — |
| RAM Size | 256 KB SRAM | — |
| Flash Memory Type | FTFE - Non-Flex (4 KB sector, 8-byte phrase) | — |
| Supply Voltage (VDD) | 1.71 V to 3.6 V (1.8 V / 2.5 V / 3.3 V rails) | — |
| Faixa de temperatura de operação | -40 C to +105 C (industrial) | -40C to +105C |
| Encapsulamento / Caixa | 100-LQFP, 14x14 mm, 0.5 mm pitch | — |
| Tipo de montagem | Surface Mount | Surface Mount |
| USB | USB 2.0 Full-Speed OTG, on-chip FS transceiver | — |
| Ethernet | 10/100 Mbps MAC, MII / RMII interface | — |
| Hardware Cryptography | AES-128/256, DES/3DES, SHA-1/256, RSA, TRNG | — |
| ADC | 16-bit SAR, up to 2x 16-ch (peripherals vary by die) | 16-bit SAR ADC |
| DAC | 12-bit | — |
| GPIO | [DATA_NEEDED: GPIO count for this LQFP-100 mask] | — |
| Low-Power Modes | Run / Wait / Stop / VLPR / VLPS / LLS / VLLS0/1/3 with RTC retention | — |
| Status RoHS | Compliant | Compliant |
| Nível MSL | 3 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL Level] |
| Core Architecture | — | ARM Cortex-M4F with FPU and DSP |
| Flash Memory | — | 1 MB |
| SRAM | — | 256 KB |
| Supply Voltage Range | — | 1.71 V to 3.6 V |
| Encapsulamento | — | 100-LQFP (LL) |
| Contagem de pinos | — | 100 |
| GPIO Count | — | Up to 80 |
| USB Controller | — | USB 2.0 OTG Full-Speed (Device/Host/OTG) |
| CAN | — | 2 x FlexCAN |
| Operating Voltage | — | 1.8 V / 2.5 V / 3.3 V |
| Run Current | — | 250 uA/MHz (typical) |
| Stop Current | — | < 340 nA |
| Wake-Up Time from Stop | — | 4.5 us |
| Low-Leakage Wake-Up Unit | — | Yes |