SN65HVD77D vs SN65HVD12D Comparação
Comparação detalhada lado a lado de SN65HVD77D por Texas Instruments e SN65HVD12D por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
SN65HVD77D - 3.3V 50Mbps Full-Duplex RS-485 | Texas Instruments
SN65HVD77D ✓ AtivoComparação de especificações
| Parâmetro | SN65HVD77D | SN65HVD12D |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Interface ICs | RS-485/RS-422 |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | Full-duplex RS-485 transceiver | Differential RS-422/RS-485 transceiver |
| Supply Voltage Range | 3.0 V to 3.6 V | — |
| Nominal Supply Voltage | 3.3 V | — |
| Maximum Data Rate | 50 Mbps | — |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Duplex Mode | Full duplex | Half-duplex |
| Supported Standards | RS-485 and RS-422 | ANSI TIA/EIA-485-A and ISO 8482:1993 |
| ESD Protection | ±12 kV IEC | — |
| Faixa de temperatura de operação | -40°C to 125°C | -40°C to +85°C |
| Encapsulamento | 8-pin SOIC (D) | 8-pin SOIC |
| Package Width | 3.90 mm | — |
| Tipo de montagem | Surface mount | Surface mount |
| External Enable Controls | None | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Driver Output Type | Differential | — |
| Receiver Output Type | Single-ended logic output | — |
| Low-Power Standby Current | Less than 5 µA when driver and receiver are disabled | — |
| Termination Requirement | External termination required | — |
| Tensão de alimentação | — | 3.3 V |
| Maximum Signaling Rate | — | 1 Mbit/s |
| Driver Configuration | — | 3-state differential line driver |
| Receiver Configuration | — | Differential line receiver |
| Transmitters per Device | — | 1 |
| Receivers per Device | — | 1 |
| Bus-Pin ESD Protection | — | Exceeds 16 kV HBM |
| Unit-Load Option | — | 1/8 unit load, up to 256 nodes |
| Signal Type | — | Balanced differential |
| Power-Supply Architecture | — | Single supply |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |