SN65HVD77D vs SN65HVD12D 비교
다음의 상세 나란히 비교: SN65HVD77D 제조: Texas Instruments 및 SN65HVD12D 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | SN65HVD77D | SN65HVD12D |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Interface ICs | RS-485/RS-422 |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Full-duplex RS-485 transceiver | Differential RS-422/RS-485 transceiver |
| Supply Voltage Range | 3.0 V to 3.6 V | — |
| Nominal Supply Voltage | 3.3 V | — |
| Maximum Data Rate | 50 Mbps | — |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Duplex Mode | Full duplex | Half-duplex |
| Supported Standards | RS-485 and RS-422 | ANSI TIA/EIA-485-A and ISO 8482:1993 |
| ESD Protection | ±12 kV IEC | — |
| 동작 온도 범위 | -40°C to 125°C | -40°C to +85°C |
| 패키지 | 8-pin SOIC (D) | 8-pin SOIC |
| Package Width | 3.90 mm | — |
| 실장 유형 | Surface mount | Surface mount |
| External Enable Controls | None | — |
| RoHS 상태 | Compliant | [DATA_NEEDED: RoHS status] |
| Driver Output Type | Differential | — |
| Receiver Output Type | Single-ended logic output | — |
| Low-Power Standby Current | Less than 5 µA when driver and receiver are disabled | — |
| Termination Requirement | External termination required | — |
| 공급 전압 | — | 3.3 V |
| Maximum Signaling Rate | — | 1 Mbit/s |
| Driver Configuration | — | 3-state differential line driver |
| Receiver Configuration | — | Differential line receiver |
| Transmitters per Device | — | 1 |
| Receivers per Device | — | 1 |
| Bus-Pin ESD Protection | — | Exceeds 16 kV HBM |
| Unit-Load Option | — | 1/8 unit load, up to 256 nodes |
| Signal Type | — | Balanced differential |
| Power-Supply Architecture | — | Single supply |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |