SN65LVDS105PWR vs SN65LVDS105PWRG4 Comparação
Comparação detalhada lado a lado de SN65LVDS105PWR por Texas Instruments e SN65LVDS105PWRG4 por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
SN65LVDS105PWRG4 - 1:4 LVDS Clock Fanout Buffer 400Mbps | TI
SN65LVDS105PWRG4 ✗ Fim de vidaComparação de especificações
| Parâmetro | SN65LVDS105PWR | SN65LVDS105PWRG4 |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Clock & Timing | Clock & Timing |
| Status do ciclo de vida | Ativo | Fim de vida |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $1,28 | $0,00 |
| Função | 1 LVTTL input to 4 LVDS output repeater / fanout buffer | 1 LVTTL to 4 LVDS clock fanout buffer / repeater |
| Taxa de dados | 400 Mbps | — |
| Max Clock Frequency | 400 MHz | — |
| Tensão de alimentação | 3 V to 3.6 V (typical 3.3 V) | — |
| Input Type | LVTTL (single-ended) | LVTTL |
| Tipo de saída | LVDS (differential), 4 pairs | LVDS (4 differential pairs) |
| Output Voltage (typical) | 350 mV into 100 ohm load | — |
| Standard Compliance | ANSI EIA/TIA-644 LVDS | — |
| Canais | 1 x 1:4 | — |
| Encapsulamento | 16-TSSOP (PW) | TSSOP-16 (PW), 5 mm x 6.4 mm |
| Tipo de montagem | Surface Mount | Surface Mount |
| Technology | LVDS differential signaling | — |
| Categoria | Signal Buffers, Repeaters, Splitters - Clock Buffer | Interface - Signal Buffers, Repeaters, Splitters |
| Temperatura de operação | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Corrente de repouso | [DATA_NEEDED: quiescent current] | — |
| Input Rise/Fall Time Note | TTL/CMOS rise/fall < 500 ps may require low-Dk laminate per TI layout guidance | — |
| Configuration | — | 1 x 1:4 Channel |
| Max Data Rate | — | 400 Mbps |
| Supply Voltage Range | — | 3 V to 3.6 V |
| Typical Propagation Delay | — | 2.2 ns |
| Typical LVDS Output Voltage | — | 285 mV into 100 ohm load |
| Signaling Standard | — | ANSI EIA/TIA-644 (LVDS) |
| Bus-Terminal ESD Rating | — | Exceeds 12 kV |
| Packaging | — | Tape & Reel (PWR suffix) |
| Status RoHS | — | [DATA_NEEDED: RoHS status] |
| Status do ciclo de vida | — | Discontinued at Digi-Key |