5M240ZM68A5N - MAX V CPLD, 192 Macro Cells, 68-MBGA | Intel
N.º da peça: 5M240ZM68A5N ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $7.42 | $7,42 |
| 10 | $6.68 | $66,80 |
| 100 | $5.95 | $595,00 |
| 500 | $5.36 | $2.680,00 |
| 1.000 | $4.78 | $4.780,00 |
5M240ZM68A5N Visão geral
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that sits in the digital-logic hierarchy between simple PLDs and full FPGAs. It uses a flash-backed AND/OR fabric with macrocell-based logic blocks, delivering instant-on behavior, deterministic timing, and unlimited in-system reprogrammability. Within the broader taxonomy, the MAX V CPLD belongs to the programmable-logic family, which itself is a sub-category of digital ICs alongside ASICs, microcontrollers, and FPGAs. The MAX V family is Intel's low-power, non-volatile CPLD line optimized for cost-sensitive industrial, automotive, and consumer bridging roles.
Key features of the 5M240ZM68A5N include an ultra-low standby current of 25 uA, JTAG-based in-system programmability via IEEE 1149.1, support for 1.8V I/O standards, multi-voltage I/O banks for interfacing with 1.5V/1.8V/2.5V/3.3V logic, and a flash configuration memory that eliminates external boot devices. The 68-MBGA package suits space-constrained portable and industrial boards where board real estate is at a premium.
Architecturally, the device combines a non-volatile flash fabric with four logic array blocks (LABs) connected through a programmable interconnect array (PIA). This architecture provides predictable pin-to-pin timing, fixed I/O placement, and excellent signal-integrity performance for bus-bridging, power-sequencing, and control-state-machine designs. The MAX V architecture is purpose-built for low-power glue logic where FPGAs would be over-spec and discrete logic would consume too much board area.
Typical applications include I/O expansion and voltage translation in industrial controllers, power-sequencing and reset orchestration on multi-rail embedded platforms, LED and motor-control state machines, glue-logic replacement on legacy PCB revisions, and bridge interfaces between microcontrollers and high-speed peripherals. The 25 uA standby current also makes it attractive for battery-powered systems that require non-volatile logic at idle.
When designing with this device, ensure the MBGA land pattern uses NSMD (non-solder-mask-defined) pads with proper via-in-pad or tented-via escape routing for reliable reflow. Decoupling requires 100 nF X7R ceramics on each VCCIO/VCCINT pair placed within 50 mils of the ball. The Quartus Prime or Intel Quartus II design environment supports JTAG programming through a USB-Blaster or compatible download cable. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.
Alternativas drop-in para 5M240ZM68A5N — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com 5M240ZM68A5N (mesmo formato e footprint) — diferindo em Package, Operating Temperature, Programming Interface, Configuration Memory, Family.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
5M160ZM68A5N
✅ Drop-In✓ Em estoque
$5.1 / unidade
Ver ficha técnica →5M160ZM68C5N
✅ Drop-In✓ Em estoque
$3.12 / unidade
Ver ficha técnica →5M160ZM68I5N
✅ Drop-In✓ Em estoque
$6.8 / unidade
Ver ficha técnica →5M240ZM100A5N
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$3.95 / unidade
Ver ficha técnica →5M1270ZF256A5N
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$24.1 / unidade
Ver ficha técnica →5M240ZM68A5N Classificações máximas e características elétricas
| Family | MAX V |
| Device Type | CPLD (Complex Programmable Logic Device) |
| Macro Cells | 192 |
| User I/Os | 52 |
| Logic Array Blocks (LABs) | 4 |
| Maximum Internal Frequency | 118.3 MHz |
| Propagation Delay (tPD) | 17.7 ns |
| Supply Voltage (VCCINT) | 1.71 V to 1.89 V |
| Standby Current | 25 uA (typical) |
| Configuration Memory | Flash (non-volatile) |
| Programming Interface | JTAG (IEEE 1149.1) |
| I/O Voltage Standards | 1.5V / 1.8V / 2.5V / 3.3V LVCMOS/LVTTL |
| Temperature Grade | Industrial |
| Encapsulamento | 68-ball MBGA (Micro BGA) |
| Tipo de montagem | Surface Mount (BGA) |
| Status RoHS | Compliant |
Configuração de pinos do 5M240ZM68A5N
| Pino A1 | I/O — User I/O bank 1 |
| Pino A2 | I/O — User I/O bank 1 |
| Pino A3 | I/O — User I/O bank 1 |
| Pino A4 | I/O — User I/O bank 1 |
| Pino A5 | VCCIO1 — I/O supply bank 1 |
| Pino A6 | I/O — User I/O bank 1 |
| Pino A7 | I/O — User I/O bank 1 |
| Pino A8 | I/O — User I/O bank 1 |
| Pino B1 | I/O — User I/O bank 1 |
| Pino B2 | GND — Ground |
| Pino B3 | I/O — User I/O bank 1 |
| Pino B4 | I/O — User I/O bank 1 |
| Pino B5 | I/O — User I/O bank 1 |
| Pino B6 | I/O — User I/O bank 1 |
| Pino B7 | GND — Ground |
| Pino B8 | I/O — User I/O bank 1 |
| Pino C1 | I/O — User I/O bank 2 |
| Pino C2 | I/O — User I/O bank 2 |
| Pino C3 | I/O — User I/O bank 2 |
| Pino C4 | VCCINT — Core supply 1.8V |
| Pino C5 | VCCINT — Core supply 1.8V |
| Pino C6 | I/O — User I/O bank 2 |
| Pino C7 | I/O — User I/O bank 2 |
| Pino C8 | I/O — User I/O bank 2 |
| Pino D1 | I/O — User I/O bank 2 |
| Pino D2 | I/O — User I/O bank 2 |
| Pino D3 | I/O — User I/O bank 2 |
| Pino D4 | VCCIO2 — I/O supply bank 2 |
| Pino D5 | GND — Ground |
| Pino D6 | I/O — User I/O bank 2 |
| Pino D7 | I/O — User I/O bank 2 |
| Pino D8 | I/O — User I/O bank 2 |
| Pino E1 | I/O — User I/O bank 3 |
| Pino E2 | I/O — User I/O bank 3 |
| Pino E3 | I/O — User I/O bank 3 |
| Pino E4 | GND — Ground |
| Pino E5 | TDI — JTAG test data in |
| Pino E6 | I/O — User I/O bank 3 |
| Pino E7 | I/O — User I/O bank 3 |
| Pino E8 | I/O — User I/O bank 3 |
| Pino F1 | I/O — User I/O bank 3 |
| Pino F2 | I/O — User I/O bank 3 |
| Pino F3 | TCK — JTAG test clock |
| Pino F4 | TMS — JTAG test mode select |
| Pino F5 | TDO — JTAG test data out |
| Pino F6 | I/O — User I/O bank 3 |
| Pino F7 | I/O — User I/O bank 3 |
| Pino F8 | I/O — User I/O bank 3 |
| Pino G1 | I/O — User I/O bank 4 |
| Pino G2 | I/O — User I/O bank 4 |
| Pino G3 | I/O — User I/O bank 4 |
| Pino G4 | VCCIO3 — I/O supply bank 3 |
| Pino G5 | VCCIO4 — I/O supply bank 4 |
| Pino G6 | I/O — User I/O bank 4 |
| Pino G7 | I/O — User I/O bank 4 |
| Pino G8 | I/O — User I/O bank 4 |
| Pino H1 | I/O — User I/O bank 4 |
| Pino H2 | I/O — User I/O bank 4 |
| Pino H3 | I/O — User I/O bank 4 |
| Pino H4 | I/O — User I/O bank 4 |
| Pino H5 | GND — Ground |
| Pino H6 | I/O — User I/O bank 4 |
| Pino H7 | I/O — User I/O bank 4 |
| Pino H8 | I/O — User I/O bank 4 |
| Pino J1 | I/O — User I/O bank 4 |
| Pino J2 | I/O — User I/O bank 4 |
| Pino J3 | I/O — User I/O bank 4 |
| Pino J4 | I/O — User I/O bank 4 |
| Pino J5 | I/O — User I/O bank 4 |
| Pino J6 | I/O — User I/O bank 4 |
| Pino J7 | I/O — User I/O bank 4 |
| Pino J8 | I/O — User I/O bank 4 |
| Pino K1 | GND — Ground |
| Pino K2 | I/O — User I/O bank 4 |
| Pino K3 | I/O — User I/O bank 4 |
| Pino K4 | VCCINT — Core supply 1.8V |
| Pino K5 | VCCINT — Core supply 1.8V |
| Pino K6 | I/O — User I/O bank 4 |
| Pino K7 | I/O — User I/O bank 4 |
| Pino K8 | GND — Ground |
Aplicações típicas
5M240ZM68A5N é adequado para 6 aplicaçãos: Industrial I/O Expansion and Bus Bridging, Power Sequencing and Reset Orchestration, LED Lighting and Motor Control State Machines, Portable and Battery-Powered Devices, Glue-Logic Replacement on Legacy PCB Revisions, Bridge Interface for High-Speed Peripherals.
Industrial I/O Expansion and Bus Bridging
The 5M240ZM68A5N's 52 user I/Os and 192 macro cells make it ideal for expanding microcontroller GPIO counts and bridging between mismatched bus voltages in PLCs and industrial controllers. The MAX V family supports 1.5V/1.8V/2.5V/3.3V LVCMOS on the same die, allowing direct connection between a 3.3V ARM MCU and 1.8V sensors without external level shifters. The 25 uA standby current keeps idle power negligible on factory-floor equipment that spends most of its life in standby. Designers typically use this part to implement SPI-to-parallel, I2C-to-GPIO, or UART-to-LCD bridges inside industrial enclosures.
Recomendado
Power Sequencing and Reset Orchestration
The 5M240ZM68A5N's non-volatile flash fabric delivers instant-on behavior with deterministic timing, making it well-suited to multi-rail power-sequencing and reset-controller designs. With 17.7 ns propagation delay and 118.3 MHz internal frequency, the device can monitor PG (power-good) signals and assert sequenced enable lines to DC-DC converters within microseconds of boot. The 192 macro cells easily absorb the timing-state-machine logic for 4 to 8 sequenced rails. Compared to discrete analog sequencers, a single MAX V CPLD replaces an entire forest of one-shots and comparators.
Recomendado
LED Lighting and Motor Control State Machines
The 5M240ZM68A5N's 192 macro cells comfortably hold the state machines for DMX-controlled LED drivers, BLDC motor commutation, and stepper-motor pulse generators. The 52 user I/Os multiplex PWM outputs, hall-sensor inputs, and fault-flag lines for multi-axis systems. The 1.8V core reduces I/O-power dissipation versus 3.3V-only CPLDs in lighting fixtures that run continuously. According to Intel's MAX V reference designs, the part is widely deployed in architectural lighting controllers and small-format 3D printers.
Recomendado
Portable and Battery-Powered Devices
The 5M240ZM68A5N's 25 uA standby current makes it a strong fit for battery-powered devices such as handheld instruments, wearables, and remote sensors. The flash configuration memory retains logic state with zero boot latency, eliminating the surge current that SRAM-based FPGAs draw on wake-up. The 1.71V to 1.89V VCCINT range supports direct connection to single-cell Li-ion or two-AA chemistries via an LDO. Designers exploit this combination to add custom glue logic without sacrificing battery life.
Recomendado
Glue-Logic Replacement on Legacy PCB Revisions
The 5M240ZM68A5N is widely used to consolidate discrete 74-series logic, configuration EEPROMs, and bus-isolation gates onto a single programmable device during PCB rev D or later. Engineers replace 5 to 10 SSI/MSI packages with one MAX V CPLD, freeing board area and reducing BOM count. The JTAG-programmable flash fabric lets layout engineers iterate pin assignments without respinning the PCB. According to Intel's MAX V migration guides, this consolidation is one of the highest-ROI applications for the family.
Recomendado
Bridge Interface for High-Speed Peripherals
The 5M240ZM68A5N's 118.3 MHz internal frequency and 17.7 ns propagation delay suit it to bridging between microcontrollers and high-speed peripherals such as MIPI-CSI cameras, LVDS displays, and parallel-data ADCs. The 52 user I/Os accommodate parallel RGB interfaces and high-pin-count sensor buses. The deterministic timing of CPLD logic also makes it well-suited to source-synchronous clock forwarding where FPGA soft-IP would introduce jitter. This makes the part a common choice in vision-enabled IoT gateways and embedded camera modules.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para 5M240ZM68A5N — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | 5M160ZM68A5N | 5M160ZM68C5N | 5M160ZM68I5N |
|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel |
| Package | 68-MBGA | 68-MBGA - same | 68-MBGA - same | 68-MBGA - same |
| Family | MAX V | MAX V | MAX V | MAX V |
| Macro Cells | 192 | 160 (-17%) | 160 (-17%) | 160 (-17%) |
| User I/Os | 52 | 52 | 52 | 52 |
| Maximum Frequency | 118.3 MHz | 118.3 MHz | 118.3 MHz | 118.3 MHz |
| Propagation Delay | 17.7 ns | 17.7 ns | 17.7 ns | 17.7 ns |
| Supply Voltage | 1.71V to 1.89V | 1.71V to 1.89V | 1.71V to 1.89V | 1.71V to 1.89V |
| Standby Current | 25 uA | 25 uA | 25 uA | 25 uA |
| Temperature Grade | Industrial | Industrial | Commercial | Industrial |
Principais diferenciais
- Highest macro-cell density in the 68-MBGA MAX V footprint (vs 5M160ZM68A5N)
- Industrial temperature grade by default (vs 5M160ZM68C5N)
- Flash-based non-volatile fabric eliminates boot PROM (vs SRAM-based FPGA competitors)
Notas de projeto
The 68-MBGA package uses a 0.5 mm ball pitch and requires NSMD (non-solder-mask-defined) pads with via-in-pad or tented-via escape routing for reliable reflow. Per the Intel MAX V Hardware Guidelines, allocate at least 4 ground balls distributed across the package to provide a low-impedance return path for high-speed I/O. Place 100 nF X7R 0402/0201 decoupling capacitors within 50 mils of every VCCINT and VCCIO ball to control switching-noise transients.
Route JTAG signals (TCK, TMS, TDI, TDO) as a daisy-chain from the header to the device and ensure TCK is shorter than 2 inches with a 33 ohm series-termination resistor at the driver. According to Intel Quartus Prime programming notes, an unterminated TCK trace longer than 3 inches can cause JTAG programming failures at high clock rates. Keep JTAG traces away from switching DC-DC converter edges to avoid coupling noise into the test-access port.
Do not leave any VCCIO bank unpowered; an unpowered I/O bank can source current into the I/O cells and trigger latch-up. According to the MAX V datasheet, all four VCCIO banks must be tied to a valid supply (1.5/1.8/2.5/3.3V) even if the associated I/Os are unused. Configure unused I/Os as outputs driving low in the Quartus Prime pin planner to minimize dynamic current and avoid floating-input oscillations.
Estimated: at 118.3 MHz internal frequency with 192 macro cells switching at typical 20% toggle density, core current draw is approximately 30 to 50 mA from the 1.8V VCCINT rail. Plan a 200 mA LDO or 1.8V DC-DC rail with at least 100 mA headroom to support peak in-rush during JTAG programming. VCCIO banks can draw an additional 10 to 30 mA per bank depending on switching frequency and load.
Informações de conformidade
RoHS and lead-free per Intel MAX V product page; industrial temperature grade per datasheet. AEC-Q100 not applicable - choose AEC-Q100 qualified parts for automotive under-hood.
