DRV8313PWPR - 2.5A Triple 1/2-H Bridge Driver | TI
N.º da peça: DRV8313PWPR ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $4.6364 | $4,64 |
| 10 | $3.3485 | $33,49 |
| 100 | $2.9621 | $296,21 |
| 500 | $2.8333 | $1.416,65 |
| 1.000 | $2.7045 | $2.704,50 |
DRV8313PWPR Visão geral
A motor driver is an integrated circuit that translates low-power control signals from a microcontroller into the higher voltage and current needed to drive a motor. The DRV8313PWPR is a triple 1/2-H bridge driver, meaning it contains three independent half-bridge outputs, each capable of sourcing or sinking current. This configuration is ideal for driving three-phase brushless-DC motors, where each phase is connected to one half-bridge. The device also supports independent control of each half-bridge, allowing it to drive solenoids, relays, or other loads.
Key features of the DRV8313PWPR include a wide operating voltage range of 8V to 60V, low on-resistance MOSFETs for high efficiency, and overcurrent, overtemperature, and undervoltage lockout protection. The device also features a low-power sleep mode to reduce quiescent current when the motor is not running. These features make it a robust choice for demanding motor control applications.
The DRV8313PWPR uses a simple PWM interface, allowing direct connection to a microcontroller's PWM outputs. Each half-bridge can be controlled independently, enabling flexible motor control schemes such as trapezoidal or sinusoidal commutation. The device also includes a current-sense output that can be used for closed-loop current control, enhancing system performance.
Typical applications include three-phase brushless-DC motor drives for fans, pumps, and robotics, as well as solenoid drivers and other inductive loads. The wide voltage range and high current capability make it suitable for both 12V and 24V systems, common in industrial and automotive environments.
When designing with the DRV8313PWPR, ensure adequate PCB copper area for heat dissipation, especially at high currents. The exposed thermal pad should be soldered to a large ground plane to improve thermal performance. Additionally, place decoupling capacitors close to the power supply pins to minimize voltage transients.
Alternativas drop-in para DRV8313PWPR — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
DRV8313PWP
📋 Alternativa de referência (fora do catálogo)
DRV8313PWPRG4
📋 Alternativa de referência (fora do catálogo)
DRV8313PWPRQ1
📋 Alternativa de referência (fora do catálogo)
DRV8312DDW
📋 Alternativa de referência (fora do catálogo)
L6235
📋 Alternativa de referência (fora do catálogo)
DRV8313PWPR Classificações máximas e características elétricas
| Output Current | 2.5 A continuous per channel, 3 A peak |
| Supply Voltage Range | 8 V to 60 V |
| Configuração de saída | Triple 1/2-H bridge |
| Número de saídas | 3 |
| Control Interface | PWM |
| Faixa de temperatura de operação | -40°C to 125°C |
| Encapsulamento | HTSSOP (PWP) 28-pin |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
| Nível MSL | 3 (168 hours) |
| Protection Features | Overcurrent, overtemperature, undervoltage lockout |
| Sleep Mode | Yes |
| Current Sense Output | Yes |
| Motor Type | Three-phase brushless-DC |
Configuração de pinos do DRV8313PWPR
| Pino 1 | OUT1 — Half-bridge output 1 |
| Pino 2 | OUT2 — Half-bridge output 2 |
| Pino 3 | OUT3 — Half-bridge output 3 |
| Pino 4 | GND — Ground |
| Pino 5 | GND — Ground |
| Pino 6 | VM — Motor supply voltage |
| Pino 7 | VM — Motor supply voltage |
| Pino 8 | IN1 — Control input for OUT1 |
| Pino 9 | IN2 — Control input for OUT2 |
| Pino 10 | IN3 — Control input for OUT3 |
| Pino 11 | SLEEP — Sleep mode control (active low) |
| Pino 12 | VCP — Charge pump capacitor connection |
| Pino 13 | VREG — Regulator output |
| Pino 14 | GND — Ground |
| Pino 15 | GND — Ground |
| Pino 16 | OUT1 — Half-bridge output 1 (duplicate) |
| Pino 17 | OUT2 — Half-bridge output 2 (duplicate) |
| Pino 18 | OUT3 — Half-bridge output 3 (duplicate) |
| Pino 19 | GND — Ground |
| Pino 20 | GND — Ground |
| Pino 21 | VM — Motor supply voltage (duplicate) |
| Pino 22 | VM — Motor supply voltage (duplicate) |
| Pino 23 | IN1 — Control input for OUT1 (duplicate) |
| Pino 24 | IN2 — Control input for OUT2 (duplicate) |
| Pino 25 | IN3 — Control input for OUT3 (duplicate) |
| Pino 26 | SLEEP — Sleep mode control (duplicate) |
| Pino 27 | VCP — Charge pump capacitor connection (duplicate) |
| Pino 28 | VREG — Regulator output (duplicate) |
Aplicações típicas
DRV8313PWPR é adequado para 6 aplicaçãos: Three-Phase BLDC Motor Drive, Robotics Actuators, Industrial Automation, Automotive Auxiliary Motors, Home Appliances, Medical Devices.
Three-Phase BLDC Motor Drive
The DRV8313PWPR is ideal for driving three-phase brushless-DC motors in applications such as fans, pumps, and drones. Its 2.5A continuous current capability and 8V-60V supply range make it suitable for a wide variety of motor sizes. The integrated half-bridge drivers simplify the circuit, reducing component count and board space. PWM control allows precise speed and torque regulation, while the current sense output enables closed-loop control for improved efficiency and performance.
Recomendado
Robotics Actuators
In robotics, the DRV8313PWPR can drive DC motors and solenoids used in actuators. Its independent half-bridge control allows driving multiple loads with a single IC, saving space and cost. The wide voltage range supports various battery configurations, and the protection features ensure reliable operation in dynamic environments. The compact HTSSOP package is suitable for space-constrained robot designs.
Recomendado
Industrial Automation
The DRV8313PWPR is well-suited for industrial automation equipment such as conveyor belts, pumps, and valve actuators. Its robust protection features (overcurrent, overtemperature, undervoltage) ensure reliable operation in harsh environments. The 8V-60V supply range accommodates standard industrial voltages (24V, 48V). The device's PWM interface allows easy integration with PLCs or industrial microcontrollers.
Recomendado
Automotive Auxiliary Motors
In automotive applications, the DRV8313PWPR can drive auxiliary motors such as cooling fans, window lifts, and seat adjusters. The wide supply voltage range (8V-60V) covers both 12V and 24V automotive systems. The device's protection features are essential for automotive reliability. The HTSSOP package is suitable for engine control units (ECUs) and body control modules (BCMs).
Recomendado
Home Appliances
The DRV8313PWPR is used in home appliances like washing machines, dishwashers, and vacuum cleaners to drive BLDC motors. Its low on-resistance and high efficiency help reduce power consumption, meeting energy efficiency standards. The compact package and integrated protection features simplify design and improve reliability. The device's PWM interface is compatible with common appliance microcontrollers.
Recomendado
Medical Devices
In medical devices such as infusion pumps, ventilators, and surgical tools, the DRV8313PWPR provides reliable motor control. Its wide voltage range and protection features ensure safe operation. The compact HTSSOP package is suitable for portable and space-constrained medical equipment. The device's low quiescent current in sleep mode helps extend battery life in portable devices.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para DRV8313PWPR — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | DRV8313PWP | DRV8312DDW | L6235 |
|---|---|---|---|---|
| Package | HTSSOP-28 (PWP) | HTSSOP-28 (PWP) | HTSSOP-28 (PWP) | HTSSOP-28 (PWP) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | STMicroelectronics |
| Output Current (Continuous) | 2.5 A | 2.5 A | 3.5 A | 1.4 A |
| Supply Voltage Range | 8 V to 60 V | 8 V to 60 V | 8 V to 60 V | 8 V to 52 V |
| Control Interface | PWM | PWM | PWM | PWM |
| Protection Features | Overcurrent, Overtemperature, UVLO | Overcurrent, Overtemperature, UVLO | Overcurrent, Overtemperature, UVLO | Overcurrent, Overtemperature, UVLO |
| Sleep Mode | Yes | Yes | Yes | No |
| Automotive Grade | No | No | No | No |
Principais diferenciais
- Wide supply voltage range (8V-60V) (vs L6235)
- Higher continuous current (2.5A vs 1.4A) (vs L6235)
- Sleep mode for power saving (vs L6235)
Notas de projeto
The DRV8313PWPR can dissipate significant power at high currents. The HTSSOP-28 package has an exposed thermal pad that must be soldered to a large ground plane. For continuous operation at 2.5A per channel, ensure the PCB has adequate copper area and vias to conduct heat away. Consider using thermal vias under the pad to improve heat transfer to inner layers.
Place a 0.1uF ceramic capacitor close to each VM pin and a 10uF bulk capacitor near the VM supply. The charge pump capacitor (VCP) should be placed close to the VCP pin. Keep the high-current output traces short and wide to minimize inductance and resistance. Separate the power ground and signal ground to reduce noise.
Do not exceed the absolute maximum supply voltage of 60V. Ensure the SLEEP pin is pulled high for normal operation; leaving it floating may cause unpredictable behavior. The current sense output is a voltage proportional to the load current; use it with an ADC for closed-loop control. Avoid switching the outputs while the motor is spinning at high speed without proper freewheeling diodes.
Informações de conformidade
RoHS compliant per distributor listings. Not AEC-Q100 qualified; use Q1 variant for automotive.
