A3P250-FG256T - ProASIC3 250K-Gate Flash FPGA | Microchip
N.º da peça: A3P250-FG256T ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $43.19 | $43,19 |
| 10 | $40.5 | $405,00 |
| 100 | $37.2 | $3.720,00 |
| 500 | $34.9 | $17.450,00 |
| 1.000 | $32.5 | $32.500,00 |
A3P250-FG256T Visão geral
A flash FPGA is a type of field-programmable gate array that stores its configuration in on-chip flash memory rather than volatile SRAM. This places the ProASIC3 within the broader hierarchy of programmable logic devices: flash FPGA -> FPGA -> programmable logic -> semiconductor. Because the configuration is nonvolatile, the A3P250 powers up instantly without an external configuration device, reducing total cost of ownership (TOC), board space, and bill-of-materials complexity compared with SRAM FPGAs.
Key features highlighted by Microchip include low total cost of ownership, system performance in ultra-low-density devices, a single-chip solution, small-footprint packages, and reprogrammability. The unique VersaTile architecture allows each logic tile to function as a three-input LUT equivalent or as a D-flip-flop/latch with enable, improving fabric utilization.
Technically, the A3P250 targets the 130 nm flash process with a 1.5V core, supporting automotive-grade temperature operation per distributor specifications. The 256-ball FBGA footprint supports high I/O density in a compact surface-mount form factor. Distributor data indicates the device is used where instant-on, secure, nonvolatile configuration is required, including industrial control, communications interface bridging, and automotive subsystems.
Typical applications include industrial automation controllers, glue logic and bus bridging, motor control interfaces, and portable instrumentation where a small footprint and single-chip solution matter. The A3P250 fits designs that need FPGA flexibility without configuration PROMs or power-up configuration sequencing.
When designing with the A3P250-FG256T, verify I/O banking voltage compatibility with adjacent logic and follow Microchip power decoupling guidelines for the 1.5V core rail; migration to lower-density A3P030/A3P060/A3P125 devices is documented in the Microchip pin-compatibility application note.
This page synthesizes distributor pricing, same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.
Alternativas drop-in para A3P250-FG256T — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com A3P250-FG256T (mesmo formato e footprint) — diferindo em Package, Packaging, User I/O, Configuration, Number of I/O.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
A3P400-FG256I
✅ Drop-In✓ Em estoque
$46.2 / unidade
Ver ficha técnica →A3P1000-FG256T
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
A3P1000-1FG256T
✅ Drop-In✓ Em estoque
$89.64 / unidade
Ver ficha técnica →A3P1000-FGG256M
✅ Drop-In✓ Em estoque
$27.85 / unidade
Ver ficha técnica →A3P250-FGG256
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
A3P250-FG256T Classificações máximas e características elétricas
| Family | ProASIC3 |
| Logic Gates | 250000 gates |
| System Performance | 231 MHz |
| Process Technology | 130 nm |
| Core Supply Voltage | 1.5 V |
| User I/O | 157 |
| Embedded Memory | 36864 bits |
| Encapsulamento | 256-FBGA (FG256) |
| Tipo de montagem | Surface Mount |
| Packaging | Tray |
| Configuration Memory | On-chip Flash (nonvolatile) |
| Logic Tile Architecture | VersaTile (3-input LUT or D-flip-flop/latch with enable) |
| Grade | Automotive |
| Reprogrammability | Yes |
Guia de Configuração de Pinos do A3P250-FG256T 256-fbga (fg256)
Configuração de pinos para A3P250-FG256T (pacote 256-fbga (fg256)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para A3P250-FG256T.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
A3P250-FG256T é adequado para 6 aplicaçãos: Industrial Automation Control, Automotive Subsystem Logic, Communications Interface Bridging, Portable and Battery-Powered Instrumentation, Motor Drive Control Interfaces, Security-Sensitive Embedded Systems.
Industrial Automation Control
The A3P250-FG256T suits industrial automation controllers because its 250K gates and 157 user I/Os provide enough fabric for sequencing, interlock logic, and peripheral interfacing, while instant-on flash configuration eliminates boot delays on factory-floor equipment that must be operational at power application. In a typical deployment the FPGA sits between a microcontroller and I/O modules, implementing state machines at up to 231 MHz and glue logic on the 36,864-bit embedded memory blocks for small buffering tasks. Because it is a single-chip solution with no configuration PROM, system reliability improves in electrically noisy industrial environments. The 1.5V core on a 130 nm process keeps static power low for fanless enclosures.
Recomendado
Automotive Subsystem Logic
Distributor data classifies the A3P250-FG256T as automotive grade, making it appropriate for non-safety-critical automotive electronic control modules such as body electronics, lighting sequencing, and sensor aggregation. The flash FPGA's nonvolatile configuration is an advantage here: the module is functional the moment ignition power is applied, with no configuration load time, and the single-chip solution reduces component count on high-volume boards. With 157 user I/Os in a compact 256-ball FBGA, designers can consolidate discrete glue logic and implement LIN/CAN interface bridging logic at the fabric level. The 130 nm flash process provides proven reliability characteristics expected in automotive qualification flows.
Recomendado
Communications Interface Bridging
The A3P250-FG256T is well suited to protocol bridging tasks - translating between bus standards such as parallel peripheral interfaces, SPI, UART aggregates, and custom serial links - because 157 user I/Os offer ample pin budget for wide parallel buses, and the 231 MHz fabric performance supports serializable logic at common line rates. The VersaTile architecture lets designers implement shift registers, FIFOs in the 36,864-bit memory, and handshaking state machines efficiently. Because the design is field-reprogrammable via flash, protocol updates can be deployed in the field through JTAG without replacing hardware. The single-chip configuration also avoids the configuration-bus signal integrity concerns that SRAM FPGAs introduce on dense boards.
Recomendado
Portable and Battery-Powered Instrumentation
Handheld instruments benefit from the A3P250-FG256T's low static power on the 130 nm flash process and its 1.5V core, which extends battery life compared with SRAM FPGAs that require continuous configuration retention or frequent reloads. The compact 256-ball FBGA saves board area in handheld enclosures, and instant-on behavior means measurements are available immediately at power-up - important for test tools where the user expects zero boot delay. The 250K-gate fabric handles display driving, sensor timing generation, and data formatting, while the embedded memory buffers measurement samples. Reprogrammability allows firmware-style feature updates in the field over JTAG.
Recomendado
Motor Drive Control Interfaces
The A3P250-FG256T fits motor drive systems as the interface layer between a digital signal controller and the power stage: the FPGA generates precise PWM gating patterns with fine dead-time resolution, handles encoder feedback decoding, and implements protection interlocks in deterministic fabric logic. Its 231 MHz fabric performance supports sub-nanosecond-resolution timing derived from the system clock, and the flash configuration ensures protection logic is active from the first clock cycle - a meaningful safety benefit over SRAM FPGAs that are unconfigured during boot. The 157 I/Os accommodate multiple encoder channels, gate driver PWM outputs, and fault feedback lines on one device in the compact FBGA footprint.
Recomendado
Security-Sensitive Embedded Systems
Flash FPGAs like the A3P250-FG256T are favored in designs where bitstream confidentiality matters: the configuration resides in on-chip nonvolatile flash rather than an external SRAM configuration device whose contents can be read from the bus during power-up. For industrial equipment and automotive modules where design IP protection is a requirement, the single-chip ProASIC3 solution removes the external configuration readout attack surface entirely. With 250K gates, engineers can implement authentication logic, encrypted communication wrappers, and secure state machines alongside the primary application logic, while the 36,864-bit memory supports key or session storage patterns under fabric control. Instant-on behavior additionally prevents unauthenticated logic from ever running.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para A3P250-FG256T — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | A3P400-FG256I | A3P1000-FG256T | A3P1000-1FG256T | A3P250-FGG256 |
|---|---|---|---|---|---|
| Package | 256-FBGA (FG256) | 256-FBGA (FG256) - same | 256-FBGA (FG256) - same | 256-FBGA (FG256) - same | 256-FBGA (FG256) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Logic Gates | 250000 | 400000 | 1000000 | 1000000 | 250000 |
| Core Supply Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| Configuration Memory | On-chip Flash (nonvolatile) | On-chip Flash (nonvolatile) | On-chip Flash (nonvolatile) | On-chip Flash (nonvolatile) | On-chip Flash (nonvolatile) |
Principais diferenciais
- Balanced density-to-cost point in the family (vs A3P400-FG256I)
- Lower cost than high-density same-footprint options (vs A3P1000-FG256T)
- Instant-on nonvolatile flash configuration (vs A3P250-FGG256)
Notas de projeto
The A3P250-FG256T requires a 1.5V core rail on a 130 nm flash process. Use a dedicated low-noise buck regulator with at least 10 uF of bulk and 0.1 uF per power ball of ceramic decoupling placed within 2 mm of the FBGA power balls. Power-up sequencing should bring VCC core up before or with the I/O bank rails per Microchip ProASIC3 power guidelines; violations can cause latch-up or I/O contention during flash configuration read. Verify total current by running post-layout simulation in Libero, since dynamic power scales with toggle rate.
The 256-ball FBGA (FG256) requires a controlled land pattern per Microchip package drawing; typical ball pitch demands via-in-pad or dog-bone fanout on outer two rows with blind vias for the inner array. Plan at least four signal layers with dedicated ground and core-power planes to manage the 157 user I/O return paths. Follow IPC-recommended BGA reflow profiles and inspect with X-ray on first articles, since collapsed or bridged balls on the inner array are invisible optically. Keep JTAG programming balls accessible to a test pad header.
A frequent migration error is assuming all ProASIC3 densities are freely interchangeable: while Microchip documents pin compatibility within the same package (per the A3P250-to-lower-density migration application note), I/O bank voltage assignments and unused-ball treatment must be rechecked when moving between A3P250, A3P400, or A3P1000 devices. Also confirm the exact speed and temperature suffix on purchase orders - the T suffix denotes tray packing, and I/G/I grades differ in temperature rating. Mismatches discovered at assembly are costly to unwind.
Informações de conformidade
Distributor data classifies the device as automotive grade, but explicit RoHS/REACH/AEC-Q100 certificates were not present in the verified web data and must be confirmed via the Microchip product page or material declarations.
