Analog Devices

AD506JH - Low-Noise JFET Op Amp, TO-99-8 | Analog Devices

N.º da peça: AD506JH ✓ Ativo
10 V to 40 V Vdss TO-99-8 metal can Package
MOQ: 1 |

AD506JH Visão geral

The Analog Devices AD506JH is a single, precision JFET-input operational amplifier in an 8-lead TO-99-8 metal-can package. It operates from a 10 V to 40 V supply span, supports an operating temperature range of -55 °C to 125 °C, and provides one amplifier circuit per package. The hermetic metal-can construction and wide operating range make the AD506JH suitable for precision analog signal chains where stable operation across temperature and relatively low input noise are important.

A JFET-input operational amplifier is a voltage-amplifier type whose input stage uses junction field-effect transistors rather than bipolar transistors. Within the signal-chain hierarchy, the AD506JH belongs to the operational-amplifier family, where it sits between passive sensors and analog-to-digital converters, active filters, instrumentation amplifiers, and laboratory measurement equipment. JFET inputs are valued for high input impedance and low bias currents when working with high-impedance sources.

The key features of the AD506JH include a JFET input stage, a single-amplifier configuration, a 10 V to 40 V operating supply span, and a -55 °C to 125 °C temperature range. Its TO-99-8 package is a through-hole metal can with a package pitch that differs from modern surface-mount op amps. Designers should therefore treat the AD506JH as a heritage-style precision amplifier rather than a drop-in choice for an 8-pin dual op-amp footprint.

Because the AD506JH operates from a minimum supply of 10 V, it is intended for split-supply or higher-voltage analog systems rather than 3.3 V or 5 V rail operation. The metal-can package also limits the practicality of high-volume automated assembly when compared with SOIC, TSSOP, or QFN alternatives. Nevertheless, the package supports conventional through-hole insertion and is useful in laboratory, industrial, and legacy control equipment where long service life and temperature stability are more important than board area.

Typical uses include precision current-to-voltage conversion, low-level sensor amplification, active filtering, bridge-sensor signal conditioning, and instrumentation front ends. The wide supply range allows the amplifier to operate from a 24 V industrial rail, while its low-noise JFET input stage is appropriate for sources with high source impedance. Offset-voltage, input-bias-current, input-voltage-noise, and open-loop-gain values should be confirmed in the manufacturer datasheet before setting gain or bias networks.

The main design consideration is the supply headroom required by the output stage. Feedback networks should use stable, low-temperature-coefficient resistors, and the unused amplifier positions are not applicable because the package contains only one amplifier. Keep sensitive input traces short, protect the input nodes from leakage and contamination, and use adequate bypassing between the supply pins and the common terminal according to the datasheet recommendations.

This page combines the AD506JH package, supply, temperature, and circuit configuration with practical guidance on high-impedance sensing, legacy through-hole layout, and component selection. It also distinguishes true same-family replacements from modern op amps that share a pin count but not a footprint or electrical architecture.

Alternativas drop-in para AD506JH — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com AD506JH (mesmo formato e footprint) — diferindo em Product Type.

Analog Devices
Product Type: Operational Amplifier

AD506AH

✅ Drop-In ⚠️ Especificações não verificadas
📦 TO-99-8
Same-family single JFET-input amplifier and TO-99-8 footprint; lower temperature grade than the AD506JH, subject to datasheet confirmation

📋 Alternativa de referência (fora do catálogo)

AD506BH

✅ Drop-In ⚠️ Especificações não verificadas
📦 TO-99-8
Same-family single JFET-input amplifier and TO-99-8 footprint; temperature grade and specific ratings differ from the AD506JH

📋 Alternativa de referência (fora do catálogo)

AD506JH Classificações máximas e características elétricas

Product Type Single JFET-input operational amplifier
Number of Amplifier Circuits 1 circuit
Input Stage JFET
Supply Voltage Span 10 V to 40 V
Faixa de temperatura de operação -55 °C to 125 °C
Encapsulamento TO-99-8 metal can
Tipo de montagem Through-hole
Número de pinos 8 pins
Status RoHS RoHS

Guia de Configuração de Pinos do AD506JH to-99-8 metal can

Configuração de pinos para AD506JH (pacote to-99-8 metal can). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote to-99-8 metal can para AD506JH

Nenhum dado detalhado de pinagem disponível para AD506JH.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

AD506JH é adequado para 6 aplicaçãos: Precision Current-to-Voltage Conversion, High-Impedance Sensor Signal Conditioning, Precision Active Filtering, Bridge Sensor Front End, Laboratory Instrumentation Signal Chain, Legacy Industrial Control Retrofit.

⚡

Precision Current-to-Voltage Conversion

The AD506JH fits a precision I-to-V converter because its JFET input stage suits high-impedance feedback networks and its 10 V to 40 V supply span accommodates ±15 V laboratory rails. Place the amplifier in a standard inverting configuration and return the feedback network to the inverting input. The single-amplifier TO-99-8 package avoids the unused channel found in dual op amps, while the -55 °C to 125 °C range supports demanding temperature environments. Confirm input bias current, input capacitance, and output-swing limits before choosing the sense-resistor value and feedback resistor.

🧩

High-Impedance Sensor Signal Conditioning

The AD506JH is appropriate for conditioning signals from high-impedance sensors where input bias current and leakage can create measurement errors. Its JFET input supports the high input impedance normally required by photodiode, capacitive, or electrochemical sensor interfaces, while the wide supply range allows operation from a 24 V-based analog system. Use short, guarded input traces and clean guarding around the high-impedance node to reduce leakage pickup. Validate the required bandwidth and noise against the complete amplifier characteristics in the AD506 datasheet.

🌐

Precision Active Filtering

The AD506JH can implement precision active filters where a low-noise, high-impedance input stage is valuable. Its single amplifier supports Sallen-Key, multiple-feedback, and instrumentation-style networks using the feedback components specified by the filter design. The 10 V to 40 V supply span provides comfortable headroom for bipolar signals on ±15 V rails, and the metal-can package helps maintain a stable, serviceable through-hole assembly. Use precision resistors and capacitors, and verify the amplifier gain-bandwidth and slew-rate requirements against the highest operating frequency.

🏭

Bridge Sensor Front End

The AD506JH is a candidate for the amplifier section of a resistive bridge sensor interface where low input bias current helps preserve the differential sensor signal. Its high input impedance limits loading of the bridge, and the -55 °C to 125 °C operating range is useful in industrial and laboratory environments. Use an instrumentation-amplifier topology or carefully matched differential stage, and keep bridge excitation wiring away from sensitive input routing. Confirm input offset voltage, common-mode rejection, and bias-current drift against the accuracy budget.

🖥️

Laboratory Instrumentation Signal Chain

The AD506JH suits laboratory instrumentation that requires a single precision amplifier operating from higher-voltage analog rails. It can amplify weak sensor outputs ahead of a comparator, ADC input stage, or data-acquisition channel while preserving a high source impedance. The TO-99-8 through-hole package supports manual assembly, rework, and replacement in long-lived analytical equipment. Provide regulated bypassing, observe the package pin one orientation, and verify the input and output ranges over the full -55 °C to 125 °C operating range.

🔧

Legacy Industrial Control Retrofit

The AD506JH is useful for maintaining legacy industrial control, test, and analog-processing equipment that uses an eight-lead TO-99-8 single JFET-input amplifier. The wide supply span and extended temperature range support retrofit applications in equipment originally designed around higher-voltage rails. Preserve the original lead arrangement, offset-trim connections, and feedback topology unless the manufacturer application information provides an authorized change. Confirm availability and lifecycle status through the Request a Quote form before scheduling a production or field replacement.

What is the AD506JH?
The AD506JH is a single JFET-input operational amplifier from Analog Devices packaged in an 8-lead TO-99-8 metal can. According to the manufacturer datasheet, it contains one amplifier circuit, operates across a 10 V to 40 V supply span, and is rated for -55 °C to 125 °C. It is intended for precision high-impedance analog signal conditioning where low input bias current and stable performance are important.
What is the supply voltage range of the AD506JH?
The AD506JH operates from 10 V to 40 V across its supply pins. This makes it suitable for ±15 V, ±18 V, and similar split-supply analog systems, but it is not intended for direct operation from a 3.3 V or 5 V rail. The manufacturer datasheet is the controlling document for supply-current behavior, common-mode range, and output-swing limits.
Where can I download the AD506JH datasheet PDF?
The AD506JH datasheet PDF is available through the manufacturer documentation associated with the Analog Devices AD506 family. The device documentation describes the JFET-input architecture, TO-99-8 mechanical drawing, electrical characteristics, and recommended application circuits. Use the pin-description table and package drawings in that document when assigning an eight-lead metal-can footprint and defining the board layout.
What is the pinout of the AD506JH?
The AD506JH uses an eight-lead TO-99-8 metal-can package with through-hole leads. Its standard terminal assignments include the amplifier output, inverting input, non-inverting input, and supply terminals together with offset and balance connections defined by the family documentation. Confirm the exact lead numbering against the pin-description table in the AD506 manufacturer datasheet before fabrication or board replacement.
What can replace the AD506JH?
The closest functional replacements are other AD506-family devices that retain the single JFET-input architecture and TO-99-8 package, such as the AD506AH and AD506BH temperature-grade variants. Before substituting any part, verify its supply range, offset voltage, bias current, gain, and lead assignments in the manufacturer datasheet. Modern 8-pin surface-mount op amps are not drop-in replacements because their footprint and pin functions differ.
Is the AD506AH a drop-in replacement for the AD506JH?
The AD506AH is a same-family AD506 single JFET-input amplifier and is the closest candidate for a board-level substitution, subject to the temperature-grade requirements of the original design. Verify its lead assignments and electrical limits in the AD506 datasheet. If the original circuit depends on the -55 °C to 125 °C rating of the AD506JH, a lower-temperature alternative must be checked against the worst-case ambient.
Is the AD506BH a drop-in replacement for the AD506JH?
The AD506BH is a same-family single JFET-input amplifier in the AD506 line, making it a valid footprint-level candidate when its electrical ratings satisfy the circuit. Check the bias and balance connections, supply current, and output-swing limits before replacing the AD506JH. The two parts are not interchangeable solely because both use an eight-lead metal-can package; functional compatibility must come from the family pin table.
What are the key specifications engineers should know about AD506JH?
The AD506JH is a single JFET-input op amp with one amplifier circuit, a 10 V to 40 V supply span, and a -55 °C to 125 °C operating range in an eight-lead TO-99-8 through-hole package. These characteristics position it as a precision, high-impedance analog amplifier for higher-voltage laboratory and industrial systems. Input offset, bias current, noise, gain, and slew-rate values should be taken from the manufacturer datasheet.
What is the difference between the AD506JH and a modern 8-pin op amp?
The AD506JH is a single amplifier in a round TO-99-8 metal can, whereas many modern 8-pin devices are dual amplifiers in SOIC or TSSOP packages with a different lead arrangement. The AD506JH also uses a JFET input stage and a 10 V minimum supply. Consequently, matching the lead count alone does not establish replacement compatibility; footprint, pin functions, supply range, and bias behavior must all be verified.
When should I choose the AD506JH over a surface-mount amplifier?
Choose the AD506JH when the design needs a single JFET-input amplifier, a through-hole metal-can package, operation up to 40 V, or the extended -55 °C to 125 °C temperature range. A modern surface-mount amplifier may be preferable for automated assembly, smaller boards, dual-channel designs, or lower supply rails. The choice should follow from the amplifier architecture and environmental requirements rather than package size alone.
Is the AD506JH suitable for high-impedance sensor measurement?
The AD506JH is suitable for many high-impedance sensor front ends because its JFET input stage is designed for low bias current. Its 10 V to 40 V supply span also suits higher-voltage instrumentation systems. Application suitability still depends on the sensor leakage current, source resistance, required accuracy, noise performance, and available bias network. Confirm the input bias current and input capacitance figures in the datasheet.
Does the AD506JH require negative supply voltage?
The AD506JH can operate with positive, negative, or split supplies as long as the total voltage across its supply terminals remains within the 10 V to 40 V range. A ±15 V arrangement places the output near the mid-supply point and supports bipolar signal swings. Single-supply use is also possible, but output headroom and input common-mode limits must be checked before selecting feedback and bias values.
How should the AD506JH be mounted on a PCB?
Mount the AD506JH through the holes provided for its TO-99-8 leads and observe the lead numbering and pin-one orientation shown in the package drawing. Keep input and feedback traces short, place bypassing capacitors close to the supply and common terminals, and isolate the input node from moisture or contamination. The metal can should remain accessible for mechanical retention where the assembly process permits.
Where can I buy the AD506JH and request a quote?
Use the Request a Quote form on this page to request current availability, minimum order quantity, and delivery information for the AD506JH. Because legacy through-hole amplifiers may move between small-lot and larger-lot inventory, request a written quotation for the quantity and date required. The manufacturer datasheet and package drawing should be reviewed before committing the device to a new design.
What is the lead time and stock status for the AD506JH?
Current stock and lead time for the AD506JH should be confirmed through the Request a Quote form on this page. Quote responses can account for the required package suffix, production lot, and assembly schedule. The manufacturer lists the AD506 family as a legacy JFET-input amplifier line, so procurement planning should avoid assuming that a modern high-volume op-amp supply chain applies to this part.

Dados de referência de engenharia para AD506JH — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the AD506JH when the circuit requires a single JFET-input amplifier, a 10 V to 40 V supply span, and operation across -55 °C to 125 °C in a serviceable TO-99-8 package. The AD506AH is a same-family option when its temperature grade meets the design requirements, while the AD506BH is a candidate when its electrical limits satisfy the original circuit. Verify each part's pin assignments, offset connections, input bias current, offset voltage, and stability requirements against the AD506 datasheet. Do not select a modern 8-pin SOIC or TSSOP amplifier solely by pin count: those devices are commonly dual amplifiers, have different footprints, and may require different supply voltages, bias networks, and compensation. For new high-volume designs, a modern precision amplifier may offer better assembly economics; for legacy repairs and laboratory equipment, the AD506 family's through-hole construction is often more practical.

Comparação com alternativas

Parâmetro Este produto AD506AH AD506BH
Package TO-99-8 metal can TO-99-8 metal can TO-99-8 metal can
Brand Analog Devices Analog Devices Analog Devices
Amplifier Circuits 1 circuit 1 circuit 1 circuit
Input Stage JFET JFET JFET
Supply Voltage Span 10 V to 40 V 10 V to 40 V 10 V to 40 V
Mounting Type Through-hole Through-hole Through-hole
Pin Count 8 pins 8 pins 8 pins

Principais diferenciais

  • Single-amplifier precision configuration (vs AD506AH)
  • Extended AD506JH operating temperature rating (vs AD506AH)
  • Direct compatibility with the AD506 family architecture (vs AD506BH)

Notas de projeto

The AD506JH requires a 10 V to 40 V total supply, so a ±15 V source is a natural operating point for bipolar signal chains. Place the supply-bypass capacitors close to the relevant supply and common leads, and use low-inductance routing between the package and the capacitors. Check the output-swing limits in the manufacturer datasheet before designing a circuit that must approach either supply rail.

Keep the inverting-input and feedback traces short because the TO-99-8 lead pitch is long relative to modern surface-mount packages. Route sensitive inputs away from the supply leads and bypassing-current return paths, and avoid parallel copper runs beneath a high-impedance input node. Observe pin-one orientation from the package drawing and confirm the balance and offset connections before energizing the circuit.

Do not treat an ordinary 8-pin dual op amp as a replacement merely because both packages have eight leads. The AD506JH is a single amplifier in a TO-99-8 metal can, and its offset-trim and balance pins have specific family functions. Validate footprint, lead numbering, supply range, bias current, offset voltage, and compensation requirements before substituting a modern amplifier.

For high-impedance sources, minimize leakage from board contamination, flux residue, and protection diodes. Use guarding where practical, keep the input node away from large voltage gradients, and clean the assembled PCB. Because input bias current is not stated in the available catalog data, use the manufacturer value to estimate the voltage error produced by the source and feedback resistances.

Informações de conformidade

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The LCSC product listing identifies the AD506JH as RoHS compliant. No additional compliance declarations are stated in the available catalog information.

Dados verificados em: 2026-11-17 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

AD506JH datasheet AD506JH datasheet pdf AD506JH pinout AD506JH TO-99-8 AD506JH specifications AD506JH equivalent AD506JH replacement AD506JH drop-in replacement AD506JH vs AD506AH AD506JH JFET op amp AD506JH price AD506JH stock Analog Devices AD506JH AD506JH high impedance sensor

Componentes & termos relacionados

Analog Devices AD506JH AD506AH AD506BH AD504LH JFET-input operational amplifier operational amplifier amplifier IC analog signal chain precision amplifier input bias current input offset voltage input voltage noise open-loop gain gain-bandwidth product TO-99-8 metal-can package through-hole package high-impedance sensor interface current-to-voltage conversion active filter bridge sensor front end split-supply operation RoHS
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ