Analog Devices

AD548AQ/+ - Precision Low-Power BiFET Op Amp | Analog Devices

N.º da peça: AD548AQ/+ ✓ Ativo
250 µV maximum Vdss 10 pA maximum when warmed Id 8-pin CERDIP, hermetic sealed Package
MOQ: 1 |

AD548AQ/+ Visão geral

Analog Devices AD548AQ/+ is a precision, low-power BiFET operational amplifier featuring a maximum input bias current of 10 pA when warmed, a maximum quiescent current of 200 µA, and a 1 MHz unity-gain bandwidth in an 8-pin CERDIP package. It combines low input bias current with low offset voltage and low offset drift, making it suitable for precision measurement and signal-conditioning circuits.

A BiFET operational amplifier is an amplifier whose input stage uses field-effect transistors rather than bipolar input transistors. This architecture belongs to the operational-amplifier hierarchy and provides very high input impedance, low input bias current, and effective handling of high-impedance sources. The AD548 family is designed for low-power instrumentation where a low-noise, high-impedance input stage is more important than the drive current available from conventional bipolar operational amplifiers.

The AD548AQ/+ provides a maximum offset voltage of 250 µV and maximum offset-voltage drift of 2 µV/°C. Its voltage noise is specified as 2 µV peak-to-peak, while the slew rate is 2 V/µs and the unity-gain bandwidth is 1 MHz. A maximum quiescent current of 200 µA supports low-power signal-chain operation, and the 10 pA warmed input bias current reduces loading on sensitive sensors, transducers, and high-resistance feedback networks.

The amplifier uses ion-implanted FET and laser wafer-trimming technologies. Ion implantation supports low-noise transistor construction, while laser trimming enables accurate offset-voltage correction. These techniques are particularly useful in feedback configurations where DC offset can influence the accuracy of an instrumentation amplifier, current-to-voltage converter, or low-level sensor front end. Its 1 MHz bandwidth provides useful speed for general precision analog signals while retaining the low-power characteristics of the AD548 family.

Typical applications include pH and electrochemical sensor amplification, photodiode and optical-sensor signal conditioning, low-current measurement, capacitive-sensor interfaces, precision bridge amplifiers, and low-leakage instrumentation. The amplifier is also useful in battery-powered equipment because its 200 µA maximum quiescent current limits the standing current drawn from the supply. Care is required when adding output isolation or driving capacitive loads because high-impedance nodes can increase sensitivity to stray capacitance and leakage.

For each feedback divider, verify resistor values against the input bias-current, offset, and bandwidth requirements rather than relying only on nominal gain calculations. Keep sensitive input and feedback nodes short and physically separated from switching nodes and high-current return paths. Where leakage from PCB contamination or guarding matters, use guarding techniques and clean, low-flux materials around the input terminals.

This product record combines the AD548AQ/+ electrical characteristics with package information, sourcing guidance, practical application notes, and a qualified comparison of legacy ordering variants. It is designed to help engineers evaluate bias-current noise, offset stability, power consumption, and ceramic-package suitability before integrating the amplifier into precision analog systems.

Alternativas drop-in para AD548AQ/+ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com AD548AQ/+ (mesmo formato e footprint) — diferindo em Input Bias Current, Package, Quiescent Current.

Analog Devices
Input Bias Current: 10 pA maximum, warmed up
Package: 8-CERDIP, hermetically sealed
Quiescent Current: 200 uA maximum

AD548AQ

✅ Drop-In
📦 8-pin CERDIP, hermetic sealed
Legacy ordering form of the same AD548AQ device; electrical ratings remain 10 pA maximum warmed bias current and 200 µA maximum quiescent current, a 0% difference in these two specified values.

📋 Alternativa de referência (fora do catálogo)

AD548BQ

✅ Drop-In
Analog Devices
📦 8-pin CERDIP, hermetic sealed
Single precision operational amplifier · 1 circuit · 800 uV maximum · 1 MHz · 10 pA maximum, warmed up · 200 uA maximum · Ion-implanted FET with laser wafer trimming

Consulte o preço

Ver ficha técnica →

AD548AQ/+ Classificações máximas e características elétricas

Product Type Precision low-power BiFET operational amplifier
Input Bias Current 10 pA maximum when warmed
Corrente de repouso 200 µA maximum
Offset Voltage 250 µV maximum
Offset Voltage Drift 2 µV/°C maximum
Voltage Noise 2 µV peak-to-peak
Slew Rate 2 V/µs
Unity-Gain Bandwidth 1 MHz
Number of Channels 1 channel
Circuit Count 1 circuit
Encapsulamento 8-pin CERDIP, hermetic sealed
Tipo de montagem Through-hole
Input Transistor Technology Ion-implanted FET
Offset Trimming Technology Laser wafer trimming

Guia de Configuração de Pinos do AD548AQ/+ 8-pin cerdip, hermetic sealed

Configuração de pinos para AD548AQ/+ (pacote 8-pin cerdip, hermetic sealed). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 8-pin cerdip, hermetic sealed para AD548AQ/+

Nenhum dado detalhado de pinagem disponível para AD548AQ/+.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

AD548AQ/+ é adequado para 6 aplicaçãos: High-Impedance Sensor Signal Conditioning, Photodiode and Optical Measurement, Low-Current Measurement, Precision Bridge and Instrumentation Front End, Capacitive Sensing Interface, Battery-Powered Portable Instrumentation.

🧩

High-Impedance Sensor Signal Conditioning

The AD548AQ/+ fits electrochemical, pH, humidity, and resistive sensors whose source impedance would create excessive error with a bipolar-input amplifier. Its 10 pA maximum warmed input bias current limits sensor loading, while the 250 µV maximum offset voltage and 2 µV/°C maximum drift support stable amplification of slowly changing signals. Configure it as a noninverting or differential input stage, keep high-impedance nodes short, and consider guarding when board leakage or connector contamination could approach the amplifier’s bias-current contribution.

📷

Photodiode and Optical Measurement

The AD548AQ/+ is appropriate for precision transimpedance stages used with photodiodes and other high-resistance optical sensors. Its 10 pA maximum warmed bias current limits the error caused by input bias current across a high-value feedback resistor, and the 2 V/µs slew rate can respond to small signals around the 1 MHz unity-gain bandwidth. The designer should still calculate feedback capacitance, diode capacitance, and stability margin because the ceramic-DIP device is intended primarily for lower-bandwidth precision measurements rather than high-speed optical communications.

⚡

Low-Current Measurement

For low-level current measurement, the AD548AQ/+ can form the input stage of a current-to-voltage converter using a precision feedback resistor. The 10 pA maximum warmed bias current produces less offset error than a bipolar amplifier when the feedback impedance is high, and the 200 µA maximum quiescent current supports low-power acquisition systems. Verify resistor tolerance and temperature coefficient, account for input leakage across the shunt or sensor, and use a guarded layout so contamination does not introduce a larger error than the amplifier itself.

🏭

Precision Bridge and Instrumentation Front End

The AD548AQ/+ can amplify the differential output of resistive strain gauges, pressure bridges, and other instrumentation sensors where excitation current and source impedance make bias-current error important. Its low offset voltage and low drift help preserve DC accuracy, while the low quiescent current is beneficial for portable test equipment. In a complete instrumentation chain, verify bridge excitation voltage, input common-mode range, resistor matching, and sensor grounding; the amplifier alone does not remove errors generated by bridge imbalance or sensor temperature coefficients.

📱

Capacitive Sensing Interface

The AD548AQ/+ can serve as the amplifier in a charge-balance or capacitive-sensing front end where the sensor presents a very high source impedance. The 10 pA maximum warmed bias current limits DC loading, and the 1 MHz unity-gain bandwidth is adequate for many low-frequency sensor and cable systems. Stray capacitance can interact with high-value feedback resistors, so keep the sensor and amplifier input compact, use a defined ground reference, and validate settling time before increasing measurement bandwidth.

🔋

Battery-Powered Portable Instrumentation

The AD548AQ/+ fits portable measurement equipment where a conventional precision amplifier would consume too much standby power or load a sensor excessively. Its maximum quiescent current is 200 µA, and the low 10 pA maximum warmed bias current supports weak sources operated from a limited energy budget. Because total consumption also comes from references, conversion stages, and interface circuits, use duty-cycle control where measurement speed allows and evaluate the complete signal path for current draw and startup behavior.

What is the AD548AQ/+?
The AD548AQ/+ is a precision, low-power, single-channel BiFET operational amplifier with a maximum input bias current of 10 pA when warmed and a maximum quiescent current of 200 µA. According to the Analog Devices AD548AQ datasheet, it is fabricated using ion-implanted FET and laser wafer-trimming technologies and is packaged in an 8-pin hermetically sealed CERDIP package for precision, low-power analog signal conditioning.
What are the key specifications of AD548AQ/+ that engineers should know?
The AD548AQ/+ combines a maximum input bias current of 10 pA, maximum quiescent current of 200 µA, maximum offset voltage of 250 µV, maximum offset drift of 2 µV/°C, 2 µV peak-to-peak voltage noise, 2 V/µs slew rate, and 1 MHz unity-gain bandwidth. These characteristics place it between general-purpose precision amplifiers and higher-bandwidth BiFET devices while retaining low quiescent-current operation.
Where can I download the AD548AQ/+ datasheet PDF?
The AD548AQ datasheet PDF is accessible through the AD548AQ document link listed on this page, with the manufacturer datasheet also identified as an eight-page document. Use the pin-description table, electrical-characteristics table, and package drawing in the Analog Devices documentation to verify connectivity, test conditions, and the physical pin orientation before fabrication.
Where can I find the AD548AQ/+ pinout?
The AD548AQ/+ pin assignment is defined in the manufacturer datasheet, but the individual pin names are not reproduced on this product page. Use the pin-description table and top-view package drawing in the Analog Devices datasheet to connect the ceramic DIP leads and preserve the orientation of the 8-pin CERDIP footprint.
Is AD548AQ/+ suitable for high-impedance sensors?
Yes, the AD548AQ/+ is well suited to high-impedance sensors because its maximum warmed input bias current is only 10 pA. That low loading is beneficial for photodiodes, electrochemical sensors, capacitive probes, and high-value feedback networks. Layout, connector leakage, protective-device leakage, and surface cleanliness still need consideration because they can dominate the total input error.
AD548AQ/+ vs AD548AQ: which ordering code should I use?
The AD548AQ/+ is the lead-free ordering designation associated with the Analog Devices AD548AQ device, while AD548AQ is the legacy form appearing in many records and documents. Both identify the same underlying precision low-power BiFET amplifier family and 8-pin ceramic-DIP device. Confirm the manufacturer ordering table before converting a legacy BOM because packaging and termination conventions can differ.
What is the best drop-in replacement for AD548AQ/+?
The closest documented drop-in option is the legacy AD548AQ ordering form, but a complete five-part qualified replacement list is not established by the available documentation. Do not substitute AD548BQ or AD548BR without checking temperature grade, package construction, electrical limits, and pin compatibility in the Analog Devices datasheet, because a family relationship alone does not guarantee drop-in qualification.
Can AD548BQ replace AD548AQ/+?
AD548BQ should be considered only after its grade and package details are verified. It belongs to the same AD548 family, but the available documentation does not establish a quantified electrical match or confirm the identical hermetic ceramic-DIP pinout. Compare bias current, offset voltage, drift, quiescent current, bandwidth, temperature range, and package outline before approving it as a drop-in replacement.
When should I choose AD548AQ/+ over a conventional bipolar op amp?
Choose the AD548AQ/+ when source resistance is high enough that input bias current would create unacceptable error in a bipolar amplifier. Its 10 pA maximum warmed bias current is dramatically lower than typical bipolar input bias currents, while its 1 MHz unity-gain bandwidth and 250 µV maximum offset provide adequate precision for slow sensor and instrumentation signals. Use a conventional bipolar amplifier instead when higher bandwidth, lower cost, or greater output drive is the dominant requirement.
Is AD548AQ/+ suitable for battery-powered instrumentation?
Yes, the AD548AQ/+ is suitable for low-power instrumentation because its maximum quiescent current is 200 µA. The BiFET input stage also provides low bias current, allowing weak sensors and high-impedance feedback networks to operate without excessive loading. Total system demand will include the amplifier, reference circuitry, signal-conditioning stages, and any required output driver, so evaluate the complete analog signal chain.
How should I minimize offset error in an AD548AQ/+ circuit?
Begin with the maximum offset voltage of 250 µV and maximum offset drift of 2 µV/°C, then determine whether those contributions are acceptable for the required measurement accuracy. Use high-value, low-tolerance feedback resistors only after checking input-bias-current error, and keep sensitive input and feedback traces short and guarded. A chopper or auto-zero amplifier may be preferable when offset drift dominates the application.
Where can I buy AD548AQ/+ and check its lead time?
Use the Request a Quote form on this page to request AD548AQ/+ pricing, current inventory, minimum order quantity, and production lead time. The quote team can confirm the exact AD548AQ/+ ordering code, hermetically sealed 8-pin CERDIP package, and current availability. This page intentionally presents live commercial terms through the quote process rather than fixed prices.
What is the price of AD548AQ/+?
Use the Request a Quote form on this page for the current AD548AQ/+ unit price and quantity breaks. Pricing can vary with order quantity, package form, and market conditions, so request a quote for the exact AD548AQ/+ ordering code. The same form can also clarify stock, minimum order quantity, and expected lead time.
Is AD548AQ/+ in stock and what is its lead time?
Current AD548AQ/+ inventory and lead time are handled through the Request a Quote form on this page. When requesting a quote, identify the required quantity, the 8-pin CERDIP package, and whether the order is for prototype evaluation or production. This approach provides a current answer without publishing a stock quantity that may become stale.
What can replace AD548AQ/+?
The legacy AD548AQ ordering designation is the closest documented replacement candidate because it refers to the same AD548 precision BiFET amplifier in the same 8-pin CERDIP family. Other AD548 variants require individual verification of temperature grade, package material, lead configuration, and electrical limits. Treat any substitute as a drop-in only after comparing the manufacturer pinout, absolute maximum ratings, and DC and AC characteristics.

Dados de referência de engenharia para AD548AQ/+ — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose AD548AQ/+ for precision, low-power analog circuits in which source impedance makes input bias current important. Its 10 pA maximum warmed bias current is especially useful for high-resistance sensors, while the 250 µV maximum offset, 2 µV/°C maximum drift, and 1 MHz unity-gain bandwidth provide a reasonable balance of accuracy and bandwidth. Select the legacy AD548AQ ordering form when it is the controlled item in the BOM and the manufacturer ordering conventions are compatible. Consider AD548BQ only after verifying its temperature grade and electrical limits. Do not choose a generic low-power op amp merely because the pin count matches; input bias current, offset behavior, package construction, and thermal grade are the critical selection criteria.

Comparação com alternativas

Parâmetro Este produto AD548AQ AD548BQ
Brand Analog Devices Analog Devices Analog Devices
Package 8-pin CERDIP, hermetic sealed 8-pin CERDIP, hermetic sealed 8-pin CERDIP, hermetic sealed

Principais diferenciais

  • Exceptionally low input bias current for a precision amplifier (vs AD548AQ)
  • Legacy AD548AQ ordering form provides direct continuity (vs AD548BQ)
  • Low-power precision operation (vs AD548AQ)

Notas de projeto

Keep the amplifier input, feedback components, and sensitive sensor return on a quiet part of the PCB. Avoid routing them beside switching nodes, relay contacts, motor drive traces, and high-current supply paths. For high-impedance inputs, use guard traces where appropriate and minimize exposed board area around the input terminal. The 10 pA maximum warmed bias current is exceptionally low, so PCB contamination and connector leakage can become the dominant source of measurement error.

Do not assume that every AD548 suffix is an electrical and environmental drop-in replacement. Check the ordering table for grade temperature range, package material, and termination convention, then compare offset voltage, offset drift, bias current, quiescent current, bandwidth, and slew rate. The legacy AD548AQ ordering form is the closest documented match for AD548AQ/+, while AD548BQ requires grade-level verification before schematic approval.

Evaluate capacitive loading and feedback stability before increasing operating frequency. The 1 MHz unity-gain bandwidth is most useful for precision, low-frequency signals; high-value transimpedance resistors and sensor capacitance can create additional poles that reduce phase margin. Place compensation capacitors close to the relevant pins and validate the complete amplifier-and-sensor network with a transient response test rather than relying only on the unity-gain bandwidth specification.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The AD548AQ/+ ordering suffix may denote a lead-free termination, but no explicit compliance statement is included. Compliance fields remain unknown rather than being inferred. AEC-Q100 qualification is not indicated for this precision analog device.

Dados verificados em: 2026-11-06 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

AD548AQ/+ datasheet AD548AQ datasheet PDF AD548AQ/+ pinout AD548AQ/+ specifications AD548AQ equivalent AD548AQ replacement AD548AQ drop-in replacement AD548AQ vs AD548BQ Analog Devices AD548AQ/+ AD548AQ 10 pA bias current AD548AQ 200 uA quiescent current AD548AQ CERDIP-8 AD548AQ price AD548AQ high impedance sensor

Componentes & termos relacionados

Analog Devices AD548AQ/+ AD548AQ AD548BQ BiFET operational amplifier operational amplifier precision amplifier low-power amplifier input bias current quiescent current offset voltage offset voltage drift unity-gain bandwidth slew rate ion-implanted FET laser wafer trimming 8-pin CERDIP hermetic ceramic DIP through-hole package high-impedance sensor electrochemical sensor photodiode amplifier transimpedance amplifier precision instrumentation RoHS REACH
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ