Analog Devices

AD704JN - Quad Picoampere Input Op Amp | Analog Devices

N.º da peça: AD704JN ✓ Ativo
Picoampere class Id 14-pin through-hole DIP Package
MOQ: 1 |

AD704JN Visão geral

The Analog Devices AD704JN is a quad, low-power bipolar operational amplifier featuring picoampere-class input bias current and a 14-pin through-hole DIP package. It is designed for precision measurement and signal-conditioning systems in which input bias current, bias-current drift, low-power operation, and accurate differential amplification are important. Four amplifiers are integrated into one package, allowing designers to implement multiple gain stages or independent channels while reducing component count.

An operational amplifier is a high-gain, feedback-controlled analog building block used to amplify, buffer, filter, sum, and compare differential signals. The AD704 belongs to the broader precision-amplifier category and uses Superbeta bipolar input transistors. These transistors provide picoampere input bias current levels similar to FET-input amplifiers at room temperature, while offering lower input-bias-current drift over temperature than conventional BiFET-input amplifiers.

The AD704's four-amplifier architecture is particularly useful in precision current-measurement front ends, low-level sensor interfaces, electrochemical measurement systems, photodiode signal chains, and laboratory instrumentation. Picoampere input bias current reduces the disturbance that an amplifier can impose on a high-impedance source, while bipolar input devices can provide useful low-noise behavior in carefully designed applications. The low-power operating characteristic also supports portable and multi-channel instruments where the aggregate supply demand of four amplifiers matters.

Unlike FET-input amplifiers, the Superbeta bipolar input stage is specifically intended to keep bias-current drift relatively low as temperature rises. According to the Analog Devices AD704 product page, the bias current typically increases only at elevated temperature, whereas a BiFET amplifier can experience substantially greater bias-current variation. This distinction matters when source impedance, measurement accuracy, calibration stability, and ambient-temperature variation are all important design constraints.

Typical circuit roles include transimpedance amplification, precision current sensing, buffer stages, low-level differential amplification, and offset correction. The amplifier is most useful where the source current must not be significantly disturbed and where leakage from conventional input structures could corrupt a small measurement. Designers should still account for board-level contamination, connector leakage, guarding, input protection, offset voltage, noise, and the finite input impedance of the complete measurement system.

The principal design consideration is that picoampere input bias current does not eliminate all error sources. Input bias current multiplied by source impedance creates a systematic offset, while offset voltage, input-referred noise, drift, common-mode range, output swing, and resistor tolerance can dominate the final accuracy. Stable layouts, clean guard rings, appropriate feedback resistors, and suitable reference components are therefore as important as the op-amp selection itself.

This product record combines the manufacturer's device description with package, pricing, and cross-reference information to support sourcing and engineering evaluation. It also distinguishes a true same-footprint replacement from unrelated amplifier packages, helping designers confirm pin compatibility, assess measurement requirements, and plan a controlled redesign before changing the AD704JN in an existing precision analog circuit.

Alternativas drop-in para AD704JN — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com AD704JN (mesmo formato e footprint).

AD704JNZ

✅ Drop-In
📦 14-pin through-hole DIP
Same four-channel 14-pin DIP architecture; exact suffix-specific temperature grade and ordering attributes require confirmation against the manufacturer ordering table.

📋 Alternativa de referência (fora do catálogo)

AD704JN Classificações máximas e características elétricas

Amplifier Type Quad precision bipolar operational amplifier
Number of Channels 4 channels
Input Transistor Technology Superbeta bipolar input transistors
Input Bias Current Class Picoampere class
Bias-Current Temperature Drift Typically increases only at +125 °C
Power Class Low-power bipolar operational amplifier
Package Type 14-pin through-hole DIP
Número de pinos 14 pins
Tipo de montagem Through-hole

Configuração de pinos do AD704JN

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
Pino 1 OUT A — Amplifier A output
Pino 2 -IN A — Amplifier A inverting input
Pino 3 +IN A — Amplifier A noninverting input
Pino 4 V- — Negative supply voltage
Pino 5 +IN B — Amplifier B noninverting input
Pino 6 -IN B — Amplifier B inverting input
Pino 7 OUT B — Amplifier B output
Pino 8 OUT C — Amplifier C output
Pino 9 -IN C — Amplifier C inverting input
Pino 10 +IN C — Amplifier C noninverting input
Pino 11 V+ — Positive supply voltage
Pino 12 +IN D — Amplifier D noninverting input
Pino 13 -IN D — Amplifier D inverting input
Pino 14 OUT D — Amplifier D output

Aplicações típicas

AD704JN é adequado para 6 aplicaçãos: Precision Transimpedance Amplification, Low-Level Current Sensing, Electrochemical Sensor Measurement, High-Impedance Buffering, Laboratory Instrumentation, Precision Differential Signal Conditioning.

📷

Precision Transimpedance Amplification

The AD704JN fits transimpedance front ends because its picoampere-class input bias current minimizes the current drawn from a photodiode, electrochemical sensor, or other high-impedance source. Place the amplifier in an inverting configuration and select the feedback resistor to establish the required conversion gain. The Superbeta bipolar input stage also helps limit temperature-related bias-current variation, although photodiode capacitance, resistor parasitics, board leakage, and achievable bandwidth must be considered when stabilizing the stage. Guarding and a leakage-clean assembly process remain important because external contamination can exceed the amplifier's own input current.

⚡

Low-Level Current Sensing

The AD704JN is suitable for measuring small currents through a high-value sense resistor or when sensing currents in high-impedance branches. Picoampere-class input bias current reduces the measurement disturbance introduced by the amplifier, while the low-power quad architecture allows four channels to share one package in instrumentation. The practical error budget must include amplifier offset voltage, offset drift, resistor tolerance and drift, source leakage, and the voltage developed across the sensing element. Differential arrangements can reduce sensitivity to common-mode voltage, subject to the device's specified input and output ranges.

🧪

Electrochemical Sensor Measurement

The AD704JN fits electrochemical and chemical sensors whose output currents can be extremely small. Its picoampere input bias current helps preserve the sensor signal, and the bipolar Superbeta input stage offers controlled bias-current behavior over temperature compared with conventional BiFET inputs. A typical implementation uses one amplifier as a transimpedance converter and additional channels for reference or buffer functions. Stable operation depends on guarding, low-leakage connectors, chemically compatible materials, and careful PCB cleaning because contamination and humidity can dominate the sensor interface error.

🔧

High-Impedance Buffering

The AD704JN can buffer a high-impedance source when its input current must remain small enough not to disturb the measured node. The four amplifiers permit multiple buffered outputs or gain stages in one package, reducing board area compared with four separate devices. A unity-gain buffer configuration simplifies routing, but stability, input capacitance, output loading, and frequency response must be checked. Use guarding around high-impedance inputs and ensure the source remains within the amplifier's specified common-mode range. The device is particularly appropriate where low temperature-related bias-current drift is more valuable than selecting a dedicated FET-input buffer solely for its room-temperature noise specification.

🖥️

Laboratory Instrumentation

The AD704JN is well suited to laboratory measurement equipment in which source leakage, offset drift, and repeatable behavior are more important than minimum package cost. Four channels can support a precision input stage, buffer, gain stage, and output driver within one 14-pin DIP. Layout should separate sensitive inputs from switching and power nodes, provide guarding where needed, and use stable reference resistors with suitable noise and drift characteristics. Calibration can remove static offset, but temperature variation, noise, leakage, and component tolerances must remain inside the instrument's measurement uncertainty.

📡

Precision Differential Signal Conditioning

The AD704JN can condition small differential signals where low input current and controlled bias-current drift help preserve source integrity. Differential amplifier configurations provide signal rejection when component matching and resistor ratios are controlled, while the quad package allows two differential channels or a combination of differential and reference channels. Offset voltage, common-mode error, resistor-ratio mismatch, noise, and output-drive limits must be evaluated together. The low-power architecture benefits multi-channel portable instruments, although four channels operating simultaneously can increase total supply demand and board heating compared with a single amplifier.

Resumo dos produtos recomendados

AD704JN Analog Devices Usado em: Precision Transimpedance Amplification, Low-Level Current Sensing, Electrochemical Sensor Measurement, High-Impedance Buffering, Laboratory Instrumentation, Precision Differential Signal Conditioning AD704JNZ Same-family DIP amplifier option Usado em: Precision Transimpedance Amplification, Low-Level Current Sensing, Electrochemical Sensor Measurement, High-Impedance Buffering, Laboratory Instrumentation, Precision Differential Signal Conditioning
What is the AD704JN?
The AD704JN is a quad, low-power bipolar operational amplifier with picoampere-class input bias current in a 14-pin DIP package. According to the Analog Devices AD704 product page, it uses Superbeta bipolar input transistors to provide low input bias current while reducing bias-current drift over temperature. Its four integrated channels make it suitable for precision current sensing, transimpedance amplification, buffering, and low-level differential signal conditioning.
Why does the AD704JN use Superbeta bipolar input transistors?
The AD704JN uses Superbeta bipolar input transistors to obtain picoampere input bias-current levels similar to FET-input amplifiers at room temperature while maintaining lower bias-current drift over temperature. According to the manufacturer product page, the typical bias-current increase occurs at +125 °C, unlike a BiFET amplifier whose bias current can vary more strongly with temperature. This makes the device useful when source impedance and measurement stability are critical.
Where can I download the AD704JN datasheet PDF?
The official AD704JN documentation is available through the Analog Devices AD704 product page at https://www.analog.com/en/products/ad704.html. The page provides the manufacturer data sheet, product selection table, ordering information, and technical documentation. Use the manufacturer data sheet for the authoritative pin description, electrical characteristics, operating limits, and recommended application circuits before laying out or replacing the device.
Where can I find the AD704JN pinout?
The AD704JN pinout is documented in the Analog Devices AD704 manufacturer data sheet and is shown on the AD704 product page. The device is a 14-pin DIP containing four amplifiers. Pins 1 through 7 implement amplifier A and amplifier B, pins 8 through 11 implement amplifier C together with the positive supply, and pins 12 through 14 implement amplifier D. Use the pin-description table in the manufacturer data sheet when assigning PCB tracks.
Is the AD704JNZ a drop-in replacement for the AD704JN?
The AD704JNZ is a same-manufacturer, 14-pin through-hole DIP alternative to the AD704JN, and a comparison listing identifies the same four-channel DIP architecture. It can be considered for a controlled replacement after checking the ordering-table temperature grade, package construction, and operating-region requirements. Because the suffix may identify a different qualification or packaging option, verify the exact suffix attributes against the Analog Devices ordering information before production use.
What can replace the AD704JN?
The AD704JNZ is the closest identified same-family replacement because it is also a four-channel, 14-pin through-hole DIP device from Analog Devices. No verified cross-brand drop-in replacement was identified in the cross-reference results, and components using SOIC, TSSOP, or QFN packages cannot replace the AD704JN without a PCB redesign. Confirm offset, drift, bias-current, noise, supply, and temperature specifications before substitution.
Is the AD704JN suitable for high-impedance sensors?
The AD704JN is suitable for high-impedance sensing when source current must remain extremely small. Its picoampere-class input bias current limits the current drawn from the source, and its Superbeta bipolar input stage is intended to control bias-current drift. Practical accuracy also depends on source impedance, input leakage, board cleanliness, guarding, resistor insulation, and whether the complete system's offset and noise budget satisfies the measurement requirement.
AD704JN versus BiFET-input op amp: which is better for precision current sensing?
The AD704JN is generally better when picoampere input bias current and low temperature-related bias drift are more important than selecting the lowest possible room-temperature noise figure of every BiFET part. The AD704 uses Superbeta bipolar inputs, while conventional BiFET amplifiers may experience substantially greater bias-current variation at high temperature. The correct choice depends on the source impedance, temperature range, noise target, and required measurement bandwidth.
When should I choose the AD704JN instead of a precision FET-input amplifier?
Choose the AD704JN when very low input bias current must be combined with controlled bias-current drift over the operating temperature range. A precision FET-input amplifier may be preferable when its noise, offset, drift, bandwidth, and supply characteristics are demonstrably better for the application. Compare the complete error budget rather than selecting solely from input-bias-current specifications.
How should I minimize leakage around the AD704JN inputs?
Use a clean board, guard the input and feedback nodes, keep moisture and contamination away from high-impedance traces, and select surface-mount resistors with suitable insulation characteristics when appropriate. Do not connect the guard to a signal-carrying node. The amplifier's low input bias current cannot correct leakage introduced by connectors, solder residue, humidity, or contaminated PCB surfaces, so the mechanical and assembly environment must be considered part of the measurement design.
What are the key specifications of AD704JN that engineers should know?
The key AD704JN specifications are four integrated amplifier channels, picoampere-class input bias current, Superbeta bipolar input transistors, low-power operation, and a 14-pin through-hole DIP package. The manufacturer describes the device as offering low bias-current drift over temperature compared with BiFET-input amplifiers. Supply voltage, offset, bandwidth, noise, and temperature limits must be taken from the manufacturer data sheet for the exact ordering suffix.
Where can I buy the AD704JN and check current availability?
Use the Request a Quote form on this page to request the AD704JN and obtain current availability, lead time, and order confirmation from XAIPART. The exact AD704JN listing can also be reviewed through the manufacturer product page, but the structured product page is the appropriate route for a current sourcing response. Quote handling avoids publishing stale stock or commercial information.
What is the price of the AD704JN?
The AD704JN is handled through XAIPART's Request a Quote process, which provides current commercial terms for the exact 14-pin DIP ordering suffix. Submit the required quantity and target sourcing information through the Request a Quote form on this page. This page does not embed a static unit price because commercial terms and availability can change independently of the component's technical specifications.
What is the lead time for the AD704JN?
The current lead time for AD704JN is obtained through the Request a Quote form on this page. Include the required quantity, delivery location, and any required date so the sourcing response can reflect the correct production and logistics conditions. The part's technical characteristics do not determine lead time, and no static availability claim should be inferred from the existence of a distributor listing.
Is the AD704JN active and suitable for new designs?
The Analog Devices manufacturer product page is the primary source for lifecycle status, and the AD704 is presented there as a production product. New designs should nevertheless use the current ordering table to confirm the required temperature range, package suffix, and availability for the exact AD704JN configuration. For an established circuit, retain the original suffix unless the complete manufacturer ordering data confirms equivalence.
Can AD704JNZ replace AD704JN in an existing PCB?
The AD704JNZ can fit the same 14-pin through-hole DIP footprint, but mechanical fit alone does not guarantee a production-safe replacement. The manufacturer ordering information must confirm that its electrical grade, temperature range, and ordering attributes satisfy the original circuit requirements. Check offset, drift, input bias current, supply range, noise, and operating-temperature limits before approving the substitution.

Dados de referência de engenharia para AD704JN — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the AD704JN for precision measurement designs that require picoampere-class input bias current, low temperature-related bias-current drift, and four amplifiers in one 14-pin DIP package. It is particularly appropriate for high-impedance current sensing, electrochemical sensors, photodiode interfaces, and laboratory instrumentation where source disturbance and measurement stability are critical. The AD704JNZ is the closest identified same-footprint option and can be evaluated when its exact suffix-specific ordering attributes meet the circuit requirements. Do not substitute SOIC, TSSOP, or QFN amplifier variants without redesigning the PCB. If a FET-input amplifier offers lower room-temperature noise or better offset performance, compare that advantage against the AD704JN's controlled bias-current drift over the complete operating-temperature range. Final selection should be based on the total error and noise budget rather than input bias current alone.

Comparação com alternativas

Parâmetro Este produto AD704JNZ
Package 14-pin through-hole DIP 14-pin through-hole DIP
Brand Analog Devices Analog Devices
Number of Amplifiers 4 channels 4 channels
Mounting Style Through-hole Through-hole
Exact MPN Suffix Attributes AD704JN AD704JNZ

Principais diferenciais

  • Picoampere-class input bias current (vs AD704JNZ)
  • Lower bias-current drift over temperature (vs AD704JNZ)
  • Four precision channels in one package (vs AD704JNZ)

Notas de projeto

Keep the AD704JN input and feedback traces away from switching nodes, power inductors, and high-current return paths. For picoampere-class measurements, use a guarded layout, clean the PCB after assembly, and prevent flux residue or moisture from bridging sensitive nodes. Input current is only one part of the error budget; contamination-related leakage can otherwise dominate the measurement. Confirm the manufacturer's recommended layout and pin assignments in the AD704 data sheet before finalizing the PCB.

Do not select an amplifier from input-bias-current specifications alone. Offset voltage, offset drift, input-referred noise, common-mode range, output swing, bandwidth, and resistor precision can set the measurement error. For a transimpedance stage, calculate the feedback resistance from the required sensitivity and include source capacitance, amplifier stability, and resistor parasitic capacitance. The AD704JN's low input current helps with high-impedance sources but does not remove these other error mechanisms.

Evaluate both the per-amplifier and total package supply current because all four channels can operate simultaneously. Bypass the supply pins with the capacitance recommended in the manufacturer data sheet, place each bypass component close to its supply connection, and provide an uncomplicated return path. When using ± supplies, verify that both rail magnitudes remain inside the device's specified operating limits and that the supply rails are sequenced according to the manufacturer's guidance.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance attributes were not identified in the manufacturer page excerpts or distributor listings. Confirm the current material and environmental declarations for the exact ordering suffix with Analog Devices.

Buscas relacionadas

AD704JN datasheet AD704JN pinout AD704JN datasheet pdf AD704JN equivalent AD704JN replacement AD704JN cross reference AD704JN vs AD704JNZ AD704JN DIP-14 footprint AD704JN picoampere op amp AD704JN application circuit Analog Devices AD704JN AD704JN price AD704JN stock AD704JN lead time

Componentes & termos relacionados

Analog Devices AD704 AD704JN AD704JNZ quad operational amplifier precision operational amplifier bipolar operational amplifier Superbeta bipolar input transistor BiFET input amplifier picoampere input bias current input bias-current drift input offset voltage transimpedance amplifier electrochemical sensor photodiode interface precision current sensing high-impedance buffering differential signal conditioning laboratory instrumentation 14-pin DIP through-hole package surface-mount RoHS REACH AEC-Q100
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ