AD9225AR - 12-Bit 25 MSPS ADC | Analog Devices
N.º da peça: AD9225AR ✓ AtivoAD9225AR Visão geral
An ADC is a data-conversion IC that samples an analog voltage and converts it into a numeric value. The AD9225 belongs to the pipelined ADC family, a multistage architecture commonly used for conversion rates from tens of megasamples per second to hundreds of megasamples per second. Within the broader semiconductor hierarchy, it is an analog-to-digital converter, data-converter IC, signal-processing IC, and mixed-signal semiconductor.
Key features include a 12-bit resolution, a 25 MSPS conversion rate, a guaranteed maximum differential nonlinearity error of 0.4 LSB, and guaranteed no missing codes. The converter includes both its sample-and-hold amplifier and voltage reference on chip, reducing the number of external analog components required. Its parallel output architecture supports direct connection to FPGA, CPLD, or data-capture logic for deterministic sampling throughput.
The AD9225 uses a multistage differential pipelined architecture and supports a differential input arrangement with VIN and VINB connections. The manufacturer datasheet recommends centering the analog-input common-mode voltage at approximately 2.5 V by driving VINB from a low-impedance 2.5 V source. With the VREF pin connected directly to SENSE, the reference voltage is 1 V and the corresponding input span is 2 V p-p; the stated valid input-signal range is 1.5 V to 3.5 V.
Typical uses include industrial process monitoring, communications infrastructure, digital oscilloscopes, radar and sonar signal chains, waveform capture, and precision control loops. The AD9225 is especially appropriate when 25 MSPS sampling is sufficient and parallel output provides an advantage over serial-interface converters. Its integrated sample-and-hold and reference functions simplify board design while the single +5 V supply reduces multi-rail complexity.
The main design trade-off is input bandwidth and signal integrity at 25 MSPS. Differential routing, controlled impedance, a low-noise +5 V supply, proper reference decoupling, and careful return-path management are essential for preserving full-scale accuracy. Engineers should also account for digital-output timing when routing 12 parallel data bits plus clock signals into acquisition logic.
This page consolidates the verified manufacturer specifications, current distributor availability, family pin-compatibility information, practical application guidance, and parameter-level replacement analysis. It is designed to help engineers determine whether the AD9225AR fits their acquisition architecture before purchasing or redesigning the board.
Alternativas drop-in para AD9225AR — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com AD9225AR (mesmo formato e footprint) — diferindo em Converter Type, Maximum Sampling Rate, Package, Supply Voltage.
AD9220AR
✅ Drop-InConsulte o preço
Ver ficha técnica →AD9225AR Classificações máximas e características elétricas
| Converter Type | Monolithic pipeline ADC |
| Resolução | 12 bit |
| Maximum Sampling Rate | 25 MSPS |
| Architecture | Multistage differential pipelined |
| Input Configuration | Single input, differential analog input arrangement |
| Tensão de alimentação | +5 V |
| Power Dissipation | 280 mW |
| Maximum Differential Nonlinearity Error | 0.4 LSB |
| Missing Code Performance | No missing codes guaranteed |
| On-Chip Sample-and-Hold Amplifier | Yes |
| On-Chip Voltage Reference | Yes |
| Internal Reference Voltage | 1 V with VREF connected directly to SENSE |
| Input Span | 2 V p-p |
| Valid Input Signal Range | 1.5 V to 3.5 V |
| Recommended Input Common-Mode Voltage | Approximately 2.5 V |
| Encapsulamento | 28-pin SOIC W |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
Guia de Configuração de Pinos do AD9225AR 28-pin soic w
Configuração de pinos para AD9225AR (pacote 28-pin soic w). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para AD9225AR.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
AD9225AR é adequado para 6 aplicaçãos: Communications Signal Acquisition, Industrial Process Monitoring, Digital Oscilloscope Front End, Radar and Sonar Return Processing, Precision Control and Measurement Loops, Data Acquisition and Test Equipment.
Communications Signal Acquisition
The AD9225AR fits communications and baseband acquisition systems requiring 12-bit conversion data at rates up to 25 MSPS. According to the AD9225 manufacturer datasheet Rev. C, the converter uses a multistage differential pipelined architecture and provides parallel outputs for direct capture by FPGA or CPLD logic. Place VIN and VINB on controlled-impedance, differentially routed traces and center the input common mode near 2.5 V. The principal benefit is deterministic parallel throughput, although system designers must verify bandwidth, output timing, and clock-crossing requirements against the downstream logic.
Recomendado
Industrial Process Monitoring
The AD9225AR is suitable for industrial measurement systems that need repeatable 12-bit samples at up to 25 MSPS without a multi-rail converter arrangement. According to the AD9225 manufacturer datasheet Rev. C, it operates from a single +5 V supply and integrates the sample-and-hold amplifier and voltage reference. Its 0.4 LSB maximum differential nonlinearity specification and guaranteed no-missing-code performance help support predictable signal-chain behavior. Use short analog traces, solid grounding, and decoupled supply rails, while ensuring the input remains within the specified 1.5 V to 3.5 V range.
Recomendado
Digital Oscilloscope Front End
The AD9225AR can serve as the analog acquisition stage in a digital oscilloscope or portable waveform instrument when 25 MSPS and 12-bit resolution are adequate. According to the AD9225 manufacturer datasheet Rev. C, the converter provides parallel digital outputs and integrates its sample-and-hold amplifier and voltage reference. The 280 mW typical dissipation supports a compact instrument architecture, but high-frequency board layout remains critical. Keep the analog path short, control return currents, and route the output clock and data together to minimize timing skew at the capture FPGA.
Recomendado
Radar and Sonar Return Processing
The AD9225AR is appropriate for intermediate-rate radar, sonar, and vibration-acquisition chains requiring 12-bit data at up to 25 MSPS. According to the AD9225 manufacturer datasheet Rev. C, its differential pipelined architecture and on-chip sample-and-hold amplifier support controlled conversion of analog returns into parallel digital words. The recommended 2.5 V common-mode level and 2 V p-p span simplify front-end matching when the input network is designed around those conditions. Engineers should budget extra routing margin for filtering, gain, aliasing control, and synchronization with the processing logic.
Recomendado
Precision Control and Measurement Loops
The AD9225AR can be used in closed-loop control and precision measurement systems that require more conversion throughput than a low-speed SAR ADC while accepting 12-bit resolution. According to the AD9225 manufacturer datasheet Rev. C, the converter achieves 25 MSPS, guarantees no missing codes, and limits differential nonlinearity to 0.4 LSB. Its single +5 V supply and integrated reference reduce system complexity, while parallel outputs permit direct transfer into digital control logic. Confirm acquisition latency and output timing in the complete loop because the supplied excerpts do not specify a pipeline-delay value.
Recomendado
Data Acquisition and Test Equipment
The AD9225AR is well suited to modular data-acquisition equipment, automated test systems, and instrumentation that captures repetitive analog waveforms at 25 MSPS. According to the AD9225 manufacturer datasheet Rev. C, its 12-bit parallel output can feed FPGA-based acquisition and processing logic without a serial interface. The integrated sample-and-hold amplifier and reference reduce external component count, while the single +5 V supply simplifies power planning. For dependable measurements, decouple both the supply and reference network, preserve the 2.5 V common-mode requirement, and verify output timing across temperature and process conditions.
Recomendado
Dados de referência de engenharia para AD9225AR — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | AD9220AR |
|---|---|---|
| Package | 28-pin SOIC W | 28-pin SOIC W |
| Brand | Analog Devices | Analog Devices |
Principais diferenciais
- Integrated acquisition front end (vs AD9220AR)
- Guaranteed conversion linearity and code continuity (vs AD9220AR)
- Single +5 V acquisition architecture (vs AD9220AR)
Notas de projeto
Route the analog input as a short, controlled-impedance differential pair and preserve the approximately 2.5 V common-mode requirement identified in the AD9225 manufacturer datasheet Rev. C. Keep the VINB return path continuous and closely coupled to VIN to minimize common-mode conversion and susceptibility to noise. Avoid routing the clock and parallel data through the analog-input region, and place any gain or filtering network close enough to the converter to minimize accumulated propagation delay.
Decouple the single +5 V supply close to the device and isolate it from switching converters and digital output currents. The AD9225 has 280 mW typical dissipation, but converter reference performance can still be disturbed by supply ripple. Use low-ESR local bypass capacitance with the values and layout prescribed by the complete manufacturer datasheet. The supplied excerpts also require capacitor networks on CAPT and CAPB for proper reference decoupling, so do not omit those network components.
Do not assume that every ADI family member with a similar 28-pin package is an electrically equivalent replacement. The manufacturer states pin compatibility with AD9220, AD9221, AD9223, and AD9224, but conversion rate, output timing, input bandwidth, and power can differ. Before substituting a family member, compare the complete AD9225 and candidate data sheets, especially clock latency, output timing, input voltage range, and acquisition bandwidth.
Informações de conformidade
The verified Mouser search result identifies AD9225AR as RoHS compliant. The supplied excerpts do not provide REACH, lead-free, halogen-free, or conflict-minerals declarations; AEC-Q100 is not applicable because this is an analog-to-digital converter rather than an automotive-qualified device.
