ADE9153AACPZ - Autocalibrated Energy Meter IC | Analog Devices
N.º da peça: ADE9153AACPZ ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $4.38 | $4,38 |
| 10 | $5.5288 | $55,29 |
| 100 | $5.5288 | $552,88 |
| 500 | $5.5288 | $2.764,40 |
| 1.000 | $5.5288 | $5.528,80 |
ADE9153AACPZ Visão geral
What is an energy metering IC? An energy metering IC measures voltage and current, extracts real-power information, and supplies the measurement engine for electricity meters and energy-monitoring equipment. It belongs to the signal-chain hierarchy of analog-to-digital converter, data-acquisition IC, energy-metering IC, and semiconductor. In a single-phase shunt-based meter, the voltage channel provides the potential reference while the current channel senses the voltage drop across a shunt.
The principal differentiator is mSure autocalibration. According to the Analog Devices ADE9153A product page, the feature measures the complete current and voltage signal paths and automatically calibrates the meter without requiring an accurate source or an accurate reference meter when a shunt resistor is used. This can simplify production calibration while supporting both Class 1 and Class 2 meters.
The ADE9153A is intended for accurate single-phase energy measurement rather than generic data acquisition. Its dedicated metering architecture integrates the measurement and calibration functions needed to implement a compact meter signal chain. Exact converter resolution, accuracy grades, supply range, current-channel range, output interface, and electrical limits were not included in the supplied source excerpts and must be confirmed in the manufacturer datasheet before schematic or firmware release.
Typical applications include single-phase residential electricity meters, smart-meter signal-chain boards, industrial energy monitors, utility sub-metering modules, and energy-measurement front ends using a shunt sensor. Autocalibration is particularly useful in volume manufacturing, where reducing dependence on calibrated reference instruments can streamline test and calibration workflows.
A robust implementation must follow the manufacturer’s recommended input network, grounding, filtering, PCB layout, and decoupling guidance. Designers should verify the analog input ranges and exposed-pad connection directly in the official datasheet because those values are not present in the verified excerpts. Firmware must also implement the specified measurement sequence and calibration data flow rather than treating autocalibration as a substitute for final meter accuracy testing.
This page consolidates the verified manufacturer and distributor information, distinguishes documented benefits from unavailable electrical details, and provides engineering guidance for selecting and integrating the ADE9153AACPZ in single-phase energy-metering equipment.
Alternativas drop-in para ADE9153AACPZ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com ADE9153AACPZ (mesmo formato e footprint) — diferindo em Autocalibration, Product Type.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
Nenhuma alternativa drop-in disponível para este produto.
Solicitar alternativasADE9153AACPZ Classificações máximas e características elétricas
| Product Type | Single-phase energy metering IC |
| Metering Phase | 1 phase |
| Autocalibration | mSure automatic current- and voltage-channel calibration |
| Calibration Method | Full signal-path measurement without an accurate source or accurate reference meter when a shunt resistor is used |
| Supported Meter Classes | Class 1 and Class 2 |
| Current-Sensing Method | Shunt-based |
| Package Type | 32-LFCSP (5 mm x 5 mm) |
| Lead Count | 32 leads |
| Tipo de montagem | Surface mount |
| Moisture Sensitivity Level | MSL 3 (168 hours) |
| Status RoHS | ROHS3 compliant |
| REACH Status | Unaffected |
| Lifecycle Recommendation | Recommended for new designs |
Guia de Configuração de Pinos do ADE9153AACPZ 32-lfcsp (5 mm x 5 mm)
Configuração de pinos para ADE9153AACPZ (pacote 32-lfcsp (5 mm x 5 mm)). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para ADE9153AACPZ.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
ADE9153AACPZ é adequado para 6 aplicaçãos: Single-Phase Smart Electricity Meters, Residential Energy Monitoring, Industrial Sub-Metering, Utility Load Monitoring Modules, Energy-Measurement Test Equipment, Smart Home Energy Sensors.
Single-Phase Smart Electricity Meters
The ADE9153AACPZ fits single-phase smart electricity meters because it combines voltage and current measurement with mSure autocalibration in one dedicated metering IC. Its documented support for Class 1 and Class 2 meters is valuable when a manufacturer needs a consistent production-calibration flow. A shunt resistor can serve as the current sensor, allowing the calibration process to operate without an accurate reference meter according to Analog Devices. The implementation should preserve the manufacturer’s analog filtering, grounding, and calibration sequence, while final accuracy remains subject to the complete meter design and applicable regulatory requirements.
Recomendado
Residential Energy Monitoring
The ADE9153AACPZ is applicable to compact residential energy monitors that must measure real power from a single-phase supply. Automatic current- and voltage-channel calibration can simplify adjustment across multiple hardware builds and potentially reduce production-test complexity. Using a shunt-based current path also gives the meter designer a direct sensing method when space is constrained. Engineers still need to select the shunt, voltage divider, filtering network, isolation strategy, and communications interface from requirements not contained in the verified excerpts, then validate calibration results across the intended voltage and load range.
Recomendado
Industrial Sub-Metering
Industrial sub-meters can use the ADE9153AACPZ when each branch requires dedicated single-phase energy acquisition rather than only aggregate current measurement. The IC’s automatic calibration of both measurement channels can aid repeatable factory setup, while its Class 1 and Class 2 support lets engineers align the metering path with the target accuracy class. The surrounding design must handle the applicable mains environment, galvanic isolation or non-isolated architecture, surge conditions, PCB creepage, and enclosure. Those safety and EMC details are not specified in the verified excerpts and must be established from the complete product documentation.
Recomendado
Utility Load Monitoring Modules
The ADE9153AACPZ is suitable for utility-style load monitoring modules that convert a single-phase voltage and shunt-current signal into energy data. Its dedicated metering architecture avoids relying on a general-purpose ADC for the complete measurement function, and mSure autocalibration can streamline production across multiple board variants. Designers should budget adequate input filtering and controlled analog layout around the IC, validate the exposed-pad implementation, and implement the documented measurement and calibration sequence in firmware. Exact digital-interface and timing requirements remain to be confirmed from the official datasheet.
Recomendado
Energy-Measurement Test Equipment
The ADE9153AACPZ can serve as the measurement front end in energy-meter validation equipment that must reproduce the behavior of a deployed single-phase meter. Automatic current- and voltage-channel calibration provides a useful production-control function, while Class 1 and Class 2 support helps align the design with different metering targets. A tester should still maintain traceable reference instrumentation for validating the complete product rather than treating internal autocalibration as a substitute for external accuracy certification. Input ranges, conversion performance, and interface timing must be obtained from the manufacturer data before selecting supporting test components.
Recomendado
Smart Home Energy Sensors
The ADE9153AACPZ can provide the metering core for a compact smart-home energy sensor when a single-phase branch and shunt-based current measurement are sufficient. Its autocalibration capability can improve consistency between assembled sensor variants, and the 5 mm by 5 mm 32-LFCSP package supports compact board construction. A complete sensor still needs an appropriate voltage divider, shunt, isolation or safety boundary, communications device, and firmware. The verified source does not provide supply limits or digital-interface details, so those selections must wait until the official datasheet confirms the operating requirements.
Recomendado
Dados de referência de engenharia para ADE9153AACPZ — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto |
|---|---|
| Brand | Analog Devices |
| Package | 32-LFCSP (5 mm x 5 mm) |
| Product Type | Single-phase energy metering IC |
| Phase Support | Single phase |
| Current Sensing | Shunt resistor |
| Autocalibration | mSure current- and voltage-channel autocalibration |
| Reference Meter Requirement | Not required by mSure procedure when a shunt resistor is used |
| Supported Meter Classes | Class 1 and Class 2 |
| Design Recommendation | Recommended for new designs |
Principais diferenciais
- Automatic full-signal-path calibration (vs No verified drop-in alternatives were identified)
- Meter-class support (vs No verified drop-in alternatives were identified)
- New-design positioning (vs No verified drop-in alternatives were identified)
- Dedicated measurement integration (vs No verified drop-in alternatives were identified)
Notas de projeto
Treat the voltage and current measurement channels as precision analog signal paths. Follow the manufacturer’s PCB layout guidance, keep high-current shunt traces away from sensitive measurement nodes, and provide a low-impedance ground return. The verified excerpts do not provide exact trace widths, spacing, or exposed-pad dimensions, so those values must come from the official datasheet and land pattern rather than an estimated layout.
Calculate shunt dissipation before selecting its resistance and power rating. Estimated: P = I²R; for a 2 A RMS path and a 100 microohm shunt, I²R is approximately 0.4 W at 2 A RMS. This example is an engineering estimate, not an ADE9153AACPZ datasheet specification, and the final selection must include margin for peak current, fault conditions, ambient temperature, and pulse events.
Do not interpret mSure autocalibration as the final accuracy certification of the complete electricity meter. Use the documented calibration sequence, store the resulting constants correctly, and perform external verification across voltage, current, power-factor, and temperature conditions. The feature removes the stated need for an accurate source or reference meter during its shunt-based procedure, but it does not remove external compliance or product-quality requirements.
Confirm the 32-LFCSP land pattern, exposed-pad connection, solder-reflow profile, and moisture-handling requirements in the official package documentation. The verified component information reports MSL 3 with a 168-hour floor-life limit, so production boards, dry-pack storage, baking, and solder-reflow controls must follow the distributor and manufacturer handling instructions to avoid assembly defects.
Informações de conformidade
The supplied cross-reference result identifies the ADE9153AACPZ as ROHS3 compliant, REACH unaffected, and MSL 3 with a 168-hour floor life. Automotive qualification, lead-free status, halogen-free status, and conflict-minerals compliance were not supplied.
