ADF4108BCPZ-RL7 - 8 GHz PLL Synthesizer | Analog Devices
N.º da peça: ADF4108BCPZ-RL7 ✓ AtivoADF4108BCPZ-RL7 Visão geral
A phase-locked loop synthesizer is a clock-generation and timing-control device that locks an output frequency to a stable reference. The ADF4108 belongs to the PLL family, within the broader categories of clock and timing IC, frequency synthesizer, and RF signal-chain component. Its architecture supports integer-N frequency synthesis, where programmable counters and a dual-modulus prescaler determine the synthesized output relationship to the reference signal. This makes the device useful for coherent local oscillators in RF up-conversion and down-conversion stages.
The principal specifications include an 8 GHz maximum output frequency, a 6-bit A counter, a 13-bit B counter, and programmable reference division. The A and B counters work with the P/P+1 dual-modulus prescaler to establish the required multiplication ratio and comparison frequency. A low-noise digital phase-frequency detector and precision charge pump support closed-loop phase control, while the programmable reference divider allows the external reference to be divided before comparison with the feedback divide path.
The ADF4108 architecture separates frequency programming from the external loop-filter and voltage-controlled oscillator implementation. During operation, the phase-frequency detector compares the divided feedback signal with the divided reference signal. Its error information drives the charge pump and loop filter, which then adjust the VCO until phase and frequency lock are achieved. The serial programming interface configures the counters, prescaler, reference divider, and operating modes for the desired channel configuration.
Typical uses include wireless receiver and transmitter local oscillators, RF up-converter and down-converter drive, industrial RF equipment, instrumentation, and communications modules. The synthesizer can also support test-and-measurement equipment requiring programmable RF output with stable phase relationships. The EVAL-ADF4108 evaluation platform provides a practical way to evaluate the synthesizer with an active loop filter and VCO when designing a new PLL board.
Designers should select the prescaler, A counter, B counter, reference divider, charge-pump settings, and loop filter together rather than treating them as isolated values. Component tolerances, VCO tuning gain, phase noise, reference noise, and loop bandwidth determine lock performance and close-in phase noise. Keep the charge-pump, loop-filter, RF feedback, and reference paths compact, and route the exposed thermal pad according to the package land-pattern guidance.
This product page consolidates the ADF4108 family architecture, verified distributor and manufacturer references, replacement analysis, and application-focused engineering guidance. It is intended to help designers distinguish direct drop-in candidates from related PLL devices and to plan the surrounding VCO, filter, layout, and programming work before committing to a PCB implementation.
Alternativas drop-in para ADF4108BCPZ-RL7 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com ADF4108BCPZ-RL7 (mesmo formato e footprint) — diferindo em Package.
ADF4108BCPZ
✅ Drop-InConsulte o preço
Ver ficha técnica →ADF4108S
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ADF4108BCPZ-RL7 Especificações
| Device Type | Clock/Frequency Synthesizer (RF) PLL |
| Maximum Output Frequency | 8 GHz |
| Number of PLL Channels | 1 |
| Reference Input Frequency | Up to 300 MHz |
| A Counter Width | 6 bit |
| B Counter Width | 13 bit |
| Prescaler Architecture | Dual-modulus P/P+1 |
| Phase-Frequency Detector | Low-noise digital PFD |
| Charge Pump | Precision charge pump |
| Reference Divider | Programmable |
| Programming Interface | Serial interface |
| Encapsulamento | 20-lead WFQFN exposed-pad CSP |
| Tipo de montagem | Surface mount |
| Product Status | Active |
Guia de Configuração de Pinos do ADF4108BCPZ-RL7 20-lead wfqfn exposed-pad csp
Configuração de pinos para ADF4108BCPZ-RL7 (pacote 20-lead wfqfn exposed-pad csp). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para ADF4108BCPZ-RL7.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
ADF4108BCPZ-RL7 é adequado para 6 aplicaçãos: Wireless Receiver Local Oscillator, Wireless Transmitter Up-Conversion, Industrial RF Signal Source, Instrumentation and Test Equipment, RF Communications Module, Frequency-Synthesizer Evaluation and Bring-Up.
Wireless Receiver Local Oscillator
The ADF4108BCPZ-RL7 fits a wireless receiver local-oscillator block because it generates an integer-N RF reference for coherent down-conversion. Its 8 GHz maximum synthesis frequency, 6-bit A counter, 13-bit B counter, programmable reference divider, and dual-modulus P/P+1 prescaler provide the required frequency-setting flexibility. The synthesizer is paired with an external VCO, charge-pump loop filter, and feedback divider. Designers must select those components together so the comparison frequency, VCO tuning range, and loop dynamics remain compatible. Practical performance depends on reference phase noise, divider noise, charge-pump settings, trace isolation, and stable RF return paths.
Recomendado
Wireless Transmitter Up-Conversion
ADF4108BCPZ-RL7 can supply a programmable local oscillator to a transmitter up-conversion chain, enabling the RF output frequency to track channel plans. The 8 GHz ceiling supports high-band synthesis requirements, while the programmable A and B counters and dual-modulus prescaler establish the multiplication ratio relative to the reference. The external VCO and loop filter remain essential to closed-loop frequency accuracy and phase noise. Layout should isolate the RF output and feedback path from the sensitive charge-pump and reference nodes, and the power network should be decoupled according to the manufacturer’s application guidance.
Recomendado
Industrial RF Signal Source
The ADF4108BCPZ-RL7 is suitable for industrial RF test equipment that requires a programmable, phase-coherent source or local oscillator. Its serial-programmable counters make multiple operating frequencies practical, while the 8 GHz maximum frequency supports instrument chains operating in microwave bands. A stable reference, low-noise VCO, correctly designed loop filter, and isolated feedback divider determine whether the synthesizer meets the instrument’s phase-noise and settling requirements. Calibration data can be stored alongside each programmed channel, but the capture and settling performance should be verified across temperature, supply, and VCO condition rather than inferred solely from counter values.
Recomendado
Instrumentation and Test Equipment
ADF4108BCPZ-RL7 can serve as the synthesizer inside laboratory and field instrumentation requiring accurately programmed RF frequencies. The programmable reference divider, A and B counters, and prescaler permit systematic channel selection, while the digital phase-frequency detector and precision charge pump support closed-loop phase control. For measurement-grade results, the reference oscillator’s phase noise and spur performance must be considered along with the VCO and loop filter. The loop bandwidth should satisfy both phase-noise optimization and the required lock time, making it important to evaluate the complete reference-to-output signal chain rather than optimize the synthesizer in isolation.
Recomendado
RF Communications Module
ADF4108BCPZ-RL7 provides a compact frequency-generation function for RF communications modules requiring programmable local-oscillator frequencies. Its one-channel architecture suits designs where each synthesizer drives a defined up-conversion or down-conversion path. The exposed-pad WFQFN package supports compact surface-mount implementation, but the thermal pad must be connected and thermally coupled to meet reliability expectations. RF output matching, loop-filter placement, reference routing, and ground-return continuity are central to preserving phase noise and lock performance. Designers should also account for the component count and thermal budget when integrating the synthesizer with a separate VCO.
Recomendado
Frequency-Synthesizer Evaluation and Bring-Up
The ADF4108BCPZ-RL7 is well suited to PLL prototyping because the EVAL-ADF4108 platform includes an active loop filter, VCO, SMA reference connection, power supplies, USB interface, and RF outputs. Engineers can use the evaluation environment to verify counter programming, lock behavior, output range, and loop-filter response before committing the production layout. Production-board validation should still repeat reference-noise, spur, settling, and temperature checks because the evaluation board’s components and interconnects differ from the final implementation. The results provide a practical baseline for calculating the VCO gain and loop bandwidth used in the end product.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ADF4108BCPZ-RL7 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ADF4108BCPZ | ADF4108S |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 20-lead WFQFN exposed-pad CSP | 20-lead WFQFN exposed-pad CSP | 20-lead WFQFN exposed-pad CSP |
| Device Type | Clock/Frequency Synthesizer (RF) PLL | Clock/Frequency Synthesizer (RF) PLL | Clock/Frequency Synthesizer (RF) PLL |
| Maximum Output Frequency | 8 GHz | 8 GHz | 8 GHz |
| Number of PLL Channels | 1 | 1 | 1 |
| A Counter | 6 bit | 6 bit | 6 bit |
| B Counter | 13 bit | 13 bit | 13 bit |
| Reference Input Frequency | Up to 300 MHz | Up to 300 MHz | Up to 300 MHz |
| Prescaler | Dual-modulus P/P+1 | Dual-modulus P/P+1 | Dual-modulus P/P+1 |
| Programming Interface | Serial interface | Serial interface | Serial interface |
Principais diferenciais
- Direct same-core ordering alternative (vs ADF4108BCPZ)
- Single-channel RF PLL with an 8 GHz ceiling (vs ADF4106BCPZ)
- Compact exposed-pad integration (vs ADF4157BCPZ)
Notas de projeto
Implement the ADF4108BCPZ-RL7 land pattern from the manufacturer’s 20-lead WFQFN package drawing, including the exposed-pad geometry and via arrangement. Place input, output, reference, and decoupling capacitors directly beside their associated pins to minimize parasitic inductance. Keep the serial-programming traces away from the RF feedback and charge-pump paths, and preserve a continuous ground reference beneath the device.
Treat the reference input, charge-pump output, RF feedback divider, and RF output as separate sensitivity domains during layout. Use short return paths, controlled impedance where appropriate, and isolation between the VCO and sensitive synthesizer nodes. Excessive loop-filter capacitance or long feedback routing can add phase delay and reduce phase margin, so validate the closed-loop design with the actual VCO, divider, and filter components.
Follow the manufacturer’s recommended supply bypassing and exposed-pad connection requirements. The exposed pad is part of the package thermal and electrical design, so connect it according to the package drawing rather than treating it as an unused pin. Decouple the supply close to the device and keep switching-node or high-current return currents away from the reference and charge-pump reference points to reduce supply-induced phase noise.
Do not select a replacement from the maximum-frequency headline alone. A valid substitution must also match the 20-lead WFQFN footprint, pin assignment, supply requirements, reference-input range, counter widths, prescaler behavior, serial-register map, and RF output configuration. ADF4106BCPZ and ADF4157BCPZ are related synthesizer families, but the cross-reference information does not establish those conditions, so they are redesign candidates rather than drop-ins.
Informações de conformidade
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ADF4108BCPZ-RL7 ordering configuration. The ADF4108S qualification status should be confirmed with Analog Devices before use in an automotive design.