Analog Devices

ADF4108BCPZ-RL7 - 8 GHz PLL Synthesizer | Analog Devices

부품 번호: ADF4108BCPZ-RL7 ✓ 활성
20-lead WFQFN exposed-pad CSP Package 8 GHz Speed
MOQ: 1 |

ADF4108BCPZ-RL7 개요

The Analog Devices ADF4108BCPZ-RL7 is an 8 GHz clock and frequency synthesizer IC with one PLL channel, implemented in a 20-lead WFQFN exposed-pad package. It combines a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and a dual-modulus prescaler for local-oscillator generation in wireless receivers and transmitters. The device supports reference frequencies up to 300 MHz according to its technical documentation and is programmed through a serial interface.

A phase-locked loop synthesizer is a clock-generation and timing-control device that locks an output frequency to a stable reference. The ADF4108 belongs to the PLL family, within the broader categories of clock and timing IC, frequency synthesizer, and RF signal-chain component. Its architecture supports integer-N frequency synthesis, where programmable counters and a dual-modulus prescaler determine the synthesized output relationship to the reference signal. This makes the device useful for coherent local oscillators in RF up-conversion and down-conversion stages.

The principal specifications include an 8 GHz maximum output frequency, a 6-bit A counter, a 13-bit B counter, and programmable reference division. The A and B counters work with the P/P+1 dual-modulus prescaler to establish the required multiplication ratio and comparison frequency. A low-noise digital phase-frequency detector and precision charge pump support closed-loop phase control, while the programmable reference divider allows the external reference to be divided before comparison with the feedback divide path.

The ADF4108 architecture separates frequency programming from the external loop-filter and voltage-controlled oscillator implementation. During operation, the phase-frequency detector compares the divided feedback signal with the divided reference signal. Its error information drives the charge pump and loop filter, which then adjust the VCO until phase and frequency lock are achieved. The serial programming interface configures the counters, prescaler, reference divider, and operating modes for the desired channel configuration.

Typical uses include wireless receiver and transmitter local oscillators, RF up-converter and down-converter drive, industrial RF equipment, instrumentation, and communications modules. The synthesizer can also support test-and-measurement equipment requiring programmable RF output with stable phase relationships. The EVAL-ADF4108 evaluation platform provides a practical way to evaluate the synthesizer with an active loop filter and VCO when designing a new PLL board.

Designers should select the prescaler, A counter, B counter, reference divider, charge-pump settings, and loop filter together rather than treating them as isolated values. Component tolerances, VCO tuning gain, phase noise, reference noise, and loop bandwidth determine lock performance and close-in phase noise. Keep the charge-pump, loop-filter, RF feedback, and reference paths compact, and route the exposed thermal pad according to the package land-pattern guidance.

This product page consolidates the ADF4108 family architecture, verified distributor and manufacturer references, replacement analysis, and application-focused engineering guidance. It is intended to help designers distinguish direct drop-in candidates from related PLL devices and to plan the surrounding VCO, filter, layout, and programming work before committing to a PCB implementation.

드롭인 대체품: ADF4108BCPZ-RL7 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: ADF4108BCPZ-RL7 (동일 폼 팩터 및 풋프린트) — 차이점: Package.

Analog Devices
Package: 20-lead WFQFN with exposed pad
비교 대상: ADF4108BCPZ-RL7 →

ADF4108BCPZ

✅ 드롭인
Analog Devices
📦 20-lead WFQFN exposed-pad CSP
Integer-N PLL frequency synthesizer · 8 GHz · 1 channel · Integer-N with dual-modulus prescaler · 6 bit · 13 bit · Programmable P/P+1 dual-modulus · Programmable

가격 문의

데이터시트 보기 →

ADF4108S

✅ 드롭인
📦 20-lead WFQFN exposed-pad CSP
Same ADF4108 family architecture and 8 GHz class; the S ordering option may change qualification or commercial configuration, but no quantified electrical difference is stated.

📋 참조 대체품 (카탈로그에 없음)

ADF4108BCPZ-RL7 사양

Device Type Clock/Frequency Synthesizer (RF) PLL
Maximum Output Frequency 8 GHz
Number of PLL Channels 1
Reference Input Frequency Up to 300 MHz
A Counter Width 6 bit
B Counter Width 13 bit
Prescaler Architecture Dual-modulus P/P+1
Phase-Frequency Detector Low-noise digital PFD
Charge Pump Precision charge pump
Reference Divider Programmable
Programming Interface Serial interface
패키지 20-lead WFQFN exposed-pad CSP
실장 유형 Surface mount
Product Status Active

ADF4108BCPZ-RL7 20-lead wfqfn exposed-pad csp 핀 구성 가이드

ADF4108BCPZ-RL7(20-lead wfqfn exposed-pad csp 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

ADF4108BCPZ-RL7의 20-lead wfqfn exposed-pad csp 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: ADF4108BCPZ-RL7.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

ADF4108BCPZ-RL7 적합 용도: 6 애플리케이션s: Wireless Receiver Local Oscillator, Wireless Transmitter Up-Conversion, Industrial RF Signal Source, Instrumentation and Test Equipment, RF Communications Module, Frequency-Synthesizer Evaluation and Bring-Up.

🌐

Wireless Receiver Local Oscillator

The ADF4108BCPZ-RL7 fits a wireless receiver local-oscillator block because it generates an integer-N RF reference for coherent down-conversion. Its 8 GHz maximum synthesis frequency, 6-bit A counter, 13-bit B counter, programmable reference divider, and dual-modulus P/P+1 prescaler provide the required frequency-setting flexibility. The synthesizer is paired with an external VCO, charge-pump loop filter, and feedback divider. Designers must select those components together so the comparison frequency, VCO tuning range, and loop dynamics remain compatible. Practical performance depends on reference phase noise, divider noise, charge-pump settings, trace isolation, and stable RF return paths.

📡

Wireless Transmitter Up-Conversion

ADF4108BCPZ-RL7 can supply a programmable local oscillator to a transmitter up-conversion chain, enabling the RF output frequency to track channel plans. The 8 GHz ceiling supports high-band synthesis requirements, while the programmable A and B counters and dual-modulus prescaler establish the multiplication ratio relative to the reference. The external VCO and loop filter remain essential to closed-loop frequency accuracy and phase noise. Layout should isolate the RF output and feedback path from the sensitive charge-pump and reference nodes, and the power network should be decoupled according to the manufacturer’s application guidance.

🏭

Industrial RF Signal Source

The ADF4108BCPZ-RL7 is suitable for industrial RF test equipment that requires a programmable, phase-coherent source or local oscillator. Its serial-programmable counters make multiple operating frequencies practical, while the 8 GHz maximum frequency supports instrument chains operating in microwave bands. A stable reference, low-noise VCO, correctly designed loop filter, and isolated feedback divider determine whether the synthesizer meets the instrument’s phase-noise and settling requirements. Calibration data can be stored alongside each programmed channel, but the capture and settling performance should be verified across temperature, supply, and VCO condition rather than inferred solely from counter values.

📺

Instrumentation and Test Equipment

ADF4108BCPZ-RL7 can serve as the synthesizer inside laboratory and field instrumentation requiring accurately programmed RF frequencies. The programmable reference divider, A and B counters, and prescaler permit systematic channel selection, while the digital phase-frequency detector and precision charge pump support closed-loop phase control. For measurement-grade results, the reference oscillator’s phase noise and spur performance must be considered along with the VCO and loop filter. The loop bandwidth should satisfy both phase-noise optimization and the required lock time, making it important to evaluate the complete reference-to-output signal chain rather than optimize the synthesizer in isolation.

🖥️

RF Communications Module

ADF4108BCPZ-RL7 provides a compact frequency-generation function for RF communications modules requiring programmable local-oscillator frequencies. Its one-channel architecture suits designs where each synthesizer drives a defined up-conversion or down-conversion path. The exposed-pad WFQFN package supports compact surface-mount implementation, but the thermal pad must be connected and thermally coupled to meet reliability expectations. RF output matching, loop-filter placement, reference routing, and ground-return continuity are central to preserving phase noise and lock performance. Designers should also account for the component count and thermal budget when integrating the synthesizer with a separate VCO.

🔧

Frequency-Synthesizer Evaluation and Bring-Up

The ADF4108BCPZ-RL7 is well suited to PLL prototyping because the EVAL-ADF4108 platform includes an active loop filter, VCO, SMA reference connection, power supplies, USB interface, and RF outputs. Engineers can use the evaluation environment to verify counter programming, lock behavior, output range, and loop-filter response before committing the production layout. Production-board validation should still repeat reference-noise, spur, settling, and temperature checks because the evaluation board’s components and interconnects differ from the final implementation. The results provide a practical baseline for calculating the VCO gain and loop bandwidth used in the end product.

추천 제품 요약

EVAL-ADF4108 Evaluation platform for evaluating the ADF4108 PLL architecture 사용처: Wireless Receiver Local Oscillator, Wireless Transmitter Up-Conversion, Industrial RF Signal Source, Instrumentation and Test Equipment, RF Communications Module, Frequency-Synthesizer Evaluation and Bring-Up ADF4108BCPZ Analog Devices 사용처: Wireless Receiver Local Oscillator, Wireless Transmitter Up-Conversion, Industrial RF Signal Source, Instrumentation and Test Equipment, Frequency-Synthesizer Evaluation and Bring-Up ADF4108S Related same-family synthesizer configuration 사용처: RF Communications Module
What is the operating frequency of the ADF4108BCPZ-RL7?
The ADF4108BCPZ-RL7 supports synthesis frequencies up to 8 GHz. Analog Devices identifies the device as an RF clock and frequency synthesizer with one PLL channel, using a programmable A counter, a 13-bit B counter, and a dual-modulus P/P+1 prescaler. The exact output frequency is determined by the reference frequency, reference divider, prescaler, and programmed counter values.
Where can I download the ADF4108BCPZ-RL7 datasheet PDF?
The official ADF4108BCPZ-RL7 datasheet is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4108.pdf. The ADF4108BCPZ-RL7 is the tape-and-reel ordering version of the ADF4108BCPZ family, and its architecture is covered by the manufacturer’s ADF4108 datasheet and product page.
Where can I find the ADF4108BCPZ-RL7 pinout?
Use the pin-description table and package drawing in the official Analog Devices ADF4108 datasheet to identify every connection on the 20-lead WFQFN exposed-pad package. The pinout should include the supply, ground, reference, RF input, RF output, serial programming, and exposed-pad connections shown by the manufacturer. Confirm the exposed-pad connection and thermal-land requirements before laying out the PCB.
What are the key specifications of ADF4108BCPZ-RL7 that engineers should know?
The ADF4108BCPZ-RL7 is a single-channel RF PLL frequency synthesizer rated up to 8 GHz. Its major architectural elements are a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, 6-bit A counter, 13-bit B counter, and dual-modulus P/P+1 prescaler. The device is housed in a 20-lead WFQFN exposed-pad package for surface-mounted RF and timing designs.
What can replace the ADF4108BCPZ-RL7?
The closest documented replacement is the electrically equivalent ADF4108BCPZ with a different order code, while ADF4108S represents a related same-family choice that still requires pinout and register verification. ADF4106BCPZ and ADF4157BCPZ are related frequency-synthesizer families but are not included as drop-in replacements because the cross-reference information does not establish the same package and pin compatibility. A PCB redesign should never be assumed from family similarity.
Is the ADF4108BCPZ-RL7 the same as the ADF4108BCPZ?
The ADF4108BCPZ-RL7 and ADF4108BCPZ belong to the same ADF4108 device family, but their ordering suffixes can indicate different delivery packaging. The electrical device is the 8 GHz single-channel PLL synthesizer with the same core counter and prescaler architecture. Confirm the required reel or tray format, marking, and shipping configuration before treating one order code as interchangeable with the other.
What is the best Analog Devices equivalent for the ADF4108BCPZ-RL7?
ADF4108BCPZ is the most direct Analog Devices ordering alternative because it represents the same ADF4108BCPZ device with a different packaging suffix. ADF4108S is another relevant family member, but it should be selected only after confirming package dimensions, pin assignment, supply requirements, and serial-register compatibility. Neither candidate should be approved solely from the 8 GHz headline specification.
Where can I buy the ADF4108BCPZ-RL7 and check current availability?
Use the Request a Quote form on this page to request the current price, stock position, minimum order quantity, and lead time for ADF4108BCPZ-RL7. Quote requests avoid stale commercial information and let the exact suffix, package, and reel configuration be confirmed before an order is placed.
What is the price of the ADF4108BCPZ-RL7?
Current pricing for the exact ADF4108BCPZ-RL7 ordering configuration should be obtained through the Request a Quote form on this page. The form allows the required quantity, delivery packaging, and target date to be included, which is important for a reeled 20-lead WFQFN frequency synthesizer whose commercial terms can change with volume and availability.
What is the lead time for the ADF4108BCPZ-RL7?
The current lead time depends on the requested quantity and the confirmed supply position, so it should be obtained through the Request a Quote form on this page. When requesting a quotation, specify the ADF4108BCPZ-RL7 order code, annual usage, target quantity, reel format, and required delivery date so procurement can return an actionable schedule.
Is the ADF4108BCPZ-RL7 in stock?
The exact inventory position should be confirmed through the Request a Quote form on this page rather than inferred from a product listing. A distributor listing or search result does not guarantee that the requested reel quantity is immediately available. The request should include the required quantity, shipment destination, and acceptable delivery date for a stock confirmation.
ADF4108BCPZ-RL7 vs ADF4108BCPZ-RL: which ordering code should I select?
Both order codes identify ADF4108BCPZ-family devices, but the suffix generally distinguishes delivery packaging or commercial configuration rather than a different PLL architecture. The correct choice depends on how the PCB assembly receives the component, including reel versus tray requirements and the manufacturer’s ordering information. Confirm the label, quantity per reel, and BOM requirement before releasing the order.
When should I choose the ADF4108BCPZ-RL7 over a related PLL?
Choose the ADF4108BCPZ-RL7 when the design requires a proven 8 GHz integer-N RF synthesizer, a 20-lead WFQFN footprint, and the specific Analog Devices programming architecture. Consider a related ADF4108 family option when lifecycle, qualification, or supply requirements favor it, but only after comparing the pin table, registers, supply voltage, reference frequency, and RF output configuration. Family-level similarity alone does not establish drop-in compatibility.
Is the ADF4108BCPZ-RL7 suitable for wireless transmitter and receiver local oscillators?
The ADF4108BCPZ-RL7 is suitable for programmable local oscillators in wireless receiver and transmitter up-conversion and down-conversion sections. Its 8 GHz maximum synthesis frequency, programmable A and B counters, programmable reference divider, and dual-modulus prescaler support integer-N frequency planning. The complete RF performance also depends on the external VCO, loop filter, reference source, and PCB layout.
How does the ADF4108BCPZ-RL7 compare with the ADF4106BCPZ and ADF4157BCPZ?
ADF4108BCPZ-RL7 combines an 8 GHz maximum output with a 6-bit A counter and 13-bit B counter. ADF4106BCPZ and ADF4157BCPZ are related Analog Devices frequency synthesizers, but the cross-reference listing alone does not establish identical packages, pin assignments, register maps, or divider ranges. They should therefore be treated as redesign candidates rather than automatic drop-in replacements for the 20-lead WFQPN target.

엔지니어링 참조 데이터: ADF4108BCPZ-RL7 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the ADF4108BCPZ-RL7 for a single-channel, programmable integer-N local-oscillator design requiring operation up to 8 GHz and a 20-lead WFQFN footprint. ADF4108BCPZ is the most direct procurement alternative because it represents the same core device with a different ordering or packaging configuration. Consider ADF4108S when its qualification or commercial configuration matches the design, after checking the pin table, registers, and supply requirements against the target. ADF4106BCPZ and ADF4157BCPZ may provide related PLL functions, but the available comparison information does not establish identical footprints or pin assignments; treat them as redesign options rather than drop-ins. For any substitution, validate reference range, prescaler options, counter widths, serial protocol, loop-filter behavior, RF output performance, and exposed-pad implementation on the production PCB.

대체품과의 비교

파라미터 이 제품 ADF4108BCPZ ADF4108S
Brand Analog Devices Analog Devices Analog Devices
Package 20-lead WFQFN exposed-pad CSP 20-lead WFQFN exposed-pad CSP 20-lead WFQFN exposed-pad CSP
Device Type Clock/Frequency Synthesizer (RF) PLL Clock/Frequency Synthesizer (RF) PLL Clock/Frequency Synthesizer (RF) PLL
Maximum Output Frequency 8 GHz 8 GHz 8 GHz
Number of PLL Channels 1 1 1
A Counter 6 bit 6 bit 6 bit
B Counter 13 bit 13 bit 13 bit
Reference Input Frequency Up to 300 MHz Up to 300 MHz Up to 300 MHz
Prescaler Dual-modulus P/P+1 Dual-modulus P/P+1 Dual-modulus P/P+1
Programming Interface Serial interface Serial interface Serial interface

주요 차별점

  • Direct same-core ordering alternative (vs ADF4108BCPZ)
  • Single-channel RF PLL with an 8 GHz ceiling (vs ADF4106BCPZ)
  • Compact exposed-pad integration (vs ADF4157BCPZ)

설계 노트

Implement the ADF4108BCPZ-RL7 land pattern from the manufacturer’s 20-lead WFQFN package drawing, including the exposed-pad geometry and via arrangement. Place input, output, reference, and decoupling capacitors directly beside their associated pins to minimize parasitic inductance. Keep the serial-programming traces away from the RF feedback and charge-pump paths, and preserve a continuous ground reference beneath the device.

Treat the reference input, charge-pump output, RF feedback divider, and RF output as separate sensitivity domains during layout. Use short return paths, controlled impedance where appropriate, and isolation between the VCO and sensitive synthesizer nodes. Excessive loop-filter capacitance or long feedback routing can add phase delay and reduce phase margin, so validate the closed-loop design with the actual VCO, divider, and filter components.

Follow the manufacturer’s recommended supply bypassing and exposed-pad connection requirements. The exposed pad is part of the package thermal and electrical design, so connect it according to the package drawing rather than treating it as an unused pin. Decouple the supply close to the device and keep switching-node or high-current return currents away from the reference and charge-pump reference points to reduce supply-induced phase noise.

Do not select a replacement from the maximum-frequency headline alone. A valid substitution must also match the 20-lead WFQFN footprint, pin assignment, supply requirements, reference-input range, counter widths, prescaler behavior, serial-register map, and RF output configuration. ADF4106BCPZ and ADF4157BCPZ are related synthesizer families, but the cross-reference information does not establish those conditions, so they are redesign candidates rather than drop-ins.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ADF4108BCPZ-RL7 ordering configuration. The ADF4108S qualification status should be confirmed with Analog Devices before use in an automotive design.

데이터 검증일: 2026-11-15 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

ADF4108BCPZ-RL7 ADF4108BCPZ-RL7 datasheet ADF4108BCPZ-RL7 datasheet pdf ADF4108BCPZ-RL7 pinout ADF4108BCPZ-RL7 equivalent ADF4108BCPZ-RL7 replacement ADF4108BCPZ-RL7 price ADF4108BCPZ-RL7 stock Analog Devices ADF4108BCPZ-RL7 ADF4108BCPZ-RL7 footprint ADF4108 8GHz PLL synthesizer ADF4108BCPZ-RL7 vs ADF4108BCPZ-RL

관련 부품 & 용어

Analog Devices ADF4108BCPZ-RL7 ADF4108BCPZ ADF4108S ADF4106BCPZ ADF4157BCPZ EVAL-ADF4108 phase-locked loop PLL frequency synthesizer clock and timing IC integer-N PLL phase-frequency detector PFD charge pump dual-modulus prescaler reference divider A counter B counter voltage-controlled oscillator VCO loop filter WFQFN-20 exposed pad wireless receiver wireless transmitter
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기