ADF4360-2BCP - 2 GHz Integer-N VCO | Analog Devices
N.º da peça: ADF4360-2BCP ✓ AtivoADF4360-2BCP Visão geral
An integer-N frequency synthesizer is a clock-generation and phase-locking category that combines a frequency divider, phase detector, charge pump, loop filter, and voltage-controlled oscillator. The integer-N architecture provides direct frequency synthesis from a stable reference source, allowing an external reference and feedback divider to establish the desired output relationship. In a wireless receiver, transmitter, test instrument, or frequency-conversion block, this hierarchy operates as a clock generator, then a phase-locked loop, and ultimately an RF frequency synthesizer and power-management supporting semiconductor.
The ADF4360-2 family integrates the VCO and most synthesizer functions into one component, reducing board area and external assembly compared with a discrete oscillator and divider arrangement. Programmable output power provides an adjustment range for downstream circuitry. Digital lock detection lets a host controller monitor loop-lock status, while hardware and software power-down modes support systems that need to reduce consumption or control sequencing. The 3.6 V supply and 1.8 V-compatible serial interface support integration with modern controller logic.
The divide-by-2 option broadens the usable output range by translating the approximately 2 GHz synthesizer signal into a 925 MHz to 1085 MHz RF output. This capability is useful when a downstream receiver, mixer, or measurement chain requires frequencies below the fundamental VCO range. Integer-N synthesis also makes channel selection programmable, although reference-divider, feedback-divider, loop-filter, and output-buffer settings determine phase noise, tuning range, lock behavior, and spur performance in the completed design.
Typical applications include wireless local-area network transceiver frequency generation, cellular and microwave communication equipment, RF test and measurement instruments, frequency-conversion stages, and clocking or modulation subsystems in industrial electronics. In these systems, the device can derive coherent RF or baseband-related clocks from a shared reference while the integrated lock detector reports operating status to the controller.
The principal design trade-off is that a compact integrated synthesizer does not remove the need for careful support-circuit and layout work. Reference routing, supply decoupling, the loop filter, VCO output matching, exposed-pad thermal management, and RF return paths can materially affect lock performance and phase noise. Follow the pin-description and application information in the Analog Devices datasheet when assigning tracks and selecting component values.
This page combines the device architecture, package details, drop-in family alternatives, and application-focused design guidance to support faster component selection. It also distinguishes the fundamentals from the divide-by-2 operating range, helping engineers identify the correct ADF4360 center-frequency option before beginning PCB implementation.
Alternativas drop-in para ADF4360-2BCP — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com ADF4360-2BCP (mesmo formato e footprint) — diferindo em Package, Divide-by-2 RF Output Range, Logic Compatibility, Device Type, Lock Detection.
ADF4360-1BCP
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →ADF4360-3BCP
✅ Drop-InConsulte o preço
Ver ficha técnica →ADF4360-4BCP
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →ADF4360-7BCPZ
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →ADF4360-8BCPZ
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ADF4360-2BCP Especificações
| Device Type | Fully integrated integer-N synthesizer and voltage-controlled oscillator |
| VCO Center Frequency | 2000 MHz |
| Divide-by-2 RF Output Range | 925 MHz to 1085 MHz |
| Power Supply | 3.6 V |
| Logic Compatibility | 1.8 V |
| Synthesis Architecture | Integer-N |
| Control Interface | 3-wire serial interface |
| Output Power | Programmable |
| Lock Detection | Digital |
| Power-Down Modes | Hardware and software |
| Encapsulamento | 24-LFCSP-EP |
| Lead Count | 24 leads |
| Exposed Pad | Yes |
| Tipo de montagem | Surface mount |
Guia de Configuração de Pinos do ADF4360-2BCP 24-lfcsp-ep
Configuração de pinos para ADF4360-2BCP (pacote 24-lfcsp-ep). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para ADF4360-2BCP.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
ADF4360-2BCP é adequado para 6 aplicaçãos: Wireless Transceiver Frequency Generation, RF Test and Measurement Equipment, Industrial RF Frequency Conversion, Microwave Communication Loops, Frequency-Conversion Front Ends, Synchronized Clocking and Modulation.
Wireless Transceiver Frequency Generation
The ADF4360-2BCP fits wireless transceiver clock and frequency-generation blocks operating near 2000 MHz because it integrates an integer-N synthesizer with a 2000 MHz VCO. A system reference drives the PLL, while programmable dividers establish the required channel relationship and programmable output power helps accommodate downstream mixer and driver stages. The device's 3-wire serial interface supports compact controller integration, and digital lock detection can report acquisition status. Designers should use its 925 MHz to 1085 MHz divide-by-2 mode when the receiver chain requires a sub-1 GHz local oscillator derived from the fundamental VCO.
Recomendado
RF Test and Measurement Equipment
The ADF4360-2BCP can provide programmable RF excitation for test and measurement instruments because its integrated 2000 MHz VCO and integer-N PLL architecture turn a stable reference into a selectable output. The divide-by-2 path covers 925 MHz to 1085 MHz, while the fundamental section serves designs centered around 2 GHz. Programmable output power allows calibration across multiple test levels, and the digital lock-detect feature simplifies sequencing with an instrument controller. Accurate phase-noise and spur results still depend on the reference source, loop filter, output matching network, and carefully controlled RF layout.
Recomendado
Industrial RF Frequency Conversion
The ADF4360-2BCP is suitable for industrial RF conversion stages requiring a compact local oscillator around 2000 MHz. Its integrated synthesizer and VCO reduce the component count associated with discrete oscillator-and-divider solutions, while the integer-N architecture enables programmable channel selection from a common reference. The 3.6 V supply and 1.8 V-compatible control interface suit modern embedded controllers, while lock detection supports reliable state-machine control. Choose the component when the operating band fits its tuning limits and design the exposed-pad grounding and RF output network for stable thermal and RF performance.
Recomendado
Microwave Communication Loops
The ADF4360-2BCP can support programmable local-oscillator or frequency-reference functions in microwave communication equipment centered near 2 GHz. Combining the VCO, divider chain, phase detector, and charge pump in one package supports a compact implementation, while the 3-wire serial interface allows a microcontroller or FPGA to configure channel-related registers. Its divide-by-2 output from 925 MHz to 1085 MHz provides a useful alternative frequency range. In a communication design, tune the loop for the required channel spacing and acquisition time, and isolate the reference and RF paths from switching regulators to preserve usable phase noise.
Recomendado
Frequency-Conversion Front Ends
The ADF4360-2BCP is appropriate for frequency-conversion front ends that require a programmable local oscillator near 2000 MHz or an output in the 925 MHz to 1085 MHz divide-by-2 range. Integer-N synthesis allows the output frequency to be derived predictably from a system reference, and programmable output power provides adjustment for downstream mixer stages. The integrated architecture supports compact RF boards, but the output network, reference routing, and loop filter remain essential. Validate output power, spur levels, and lock behavior across the complete operating band rather than at a single nominal channel.
Recomendado
Synchronized Clocking and Modulation
The ADF4360-2BCP can act as a programmable clock or modulation source in systems that require coherent frequencies derived from a shared reference. Its fully integrated synthesizer and VCO simplify generation near 2 GHz, and the divide-by-2 mode adds a lower-frequency option for downstream clocking or mixing. Digital lock detection permits orderly use only after the PLL acquires lock, while hardware and software power-down modes support controlled operating states. The reference distribution network should provide low phase noise, and the PCB should separate sensitive reference routing from high-current switching paths.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ADF4360-2BCP — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ADF4360-1BCP | ADF4360-3BCP | ADF4360-4BCP | ADF4360-7BCPZ | ADF4360-8BCPZ |
|---|---|---|---|---|---|---|
| Package | 24-LFCSP-EP | 24-LFCSP-EP | 24-LFCSP-EP | 24-LFCSP-EP | 24-LFCSP-EP | 24-LFCSP-EP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Architecture | Integer-N synthesizer and integrated VCO | Integer-N synthesizer and integrated VCO | Integer-N synthesizer and integrated VCO | Integer-N synthesizer and integrated VCO | Integer-N synthesizer and integrated VCO | Integer-N synthesizer and integrated VCO |
| Power Supply | 3.6 V | 3.6 V | 3.6 V | 3.6 V | 3.6 V | 3.6 V |
| Logic Compatibility | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Control Interface | 3-wire serial interface | 3-wire serial interface | 3-wire serial interface | 3-wire serial interface | 3-wire serial interface | 3-wire serial interface |
| Lock Detection | Digital | Digital | Digital | Digital | Digital | Digital |
| Power-Down Modes | Hardware and software | Hardware and software | Hardware and software | Hardware and software | Hardware and software | Hardware and software |
Principais diferenciais
- Center-frequency alignment for 2 GHz and 925 MHz to 1085 MHz designs (vs ADF4360-3BCP)
- Lower VCO center frequency than the 8 GHz family option (vs ADF4360-8BCPZ)
- Broader direct fit for 2 GHz wireless equipment than the 1 GHz family member (vs ADF4360-1BCP)
Notas de projeto
Place the required input, output, and loop-filter components close to their associated ADF4360-2BCP pins, and provide a continuous ground connection beneath the exposed pad. Keep the reference input route short and isolated from the VCO output and switching-supply return paths. The exposed pad is a thermal and electrical connection, so its via pattern and ground-plane geometry should follow the Analog Devices package and application guidance rather than being treated as an unused center lead.
Design the external loop filter around the intended reference frequency, divider settings, VCO gain, lock time, and phase-noise target. Test acquisition from both cold start and adjacent-channel changes, because a filter optimized only for steady-state phase noise can acquire slowly or produce excessive ringing. Preserve symmetry where practical, use low-noise passive components, and avoid long loops or guard structures that add unnecessary parasitic inductance around the charge-pump and VCO-control nodes.
Estimated: the required exposed-pad dissipation depends on supply voltage, output power, and operating mode, which are not numerically specified for this orderable MPN. Use the manufacturer power-dissipation and junction-temperature limits when calculating the thermal design. Provide generous ground-plane area and thermal vias beneath the package, and verify temperature rise at the highest expected channel, output-power setting, and ambient temperature while the PLL and surrounding RF circuitry are operating.
Do not treat ADF4360 family members with different numbered VCO center frequencies as automatic functional equivalents. Although the listed alternatives share the 24-LFCSP exposed-pad family footprint, divider limits, tuning range, and loop settings differ. Confirm the exact suffix, pin assignments, operating band, output-frequency limits, and temperature requirements before replacing ADF4360-2BCP, and revalidate lock, phase noise, and output power after any substitution.
Informações de conformidade
The available product information identifies the ADF4360-2BCP as a clock generator and PLL in a 24-LFCSP exposed-pad package. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established for this exact orderable MPN.