Analog Devices

ADF4360-2BCP - 2 GHz Integer-N VCO | Analog Devices

MPN: ADF4360-2BCP ✓ Hoạt động
3.6 V Vdss 24-LFCSP-EP Package 2000 MHz Speed
MOQ: 1 |

ADF4360-2BCP Tóm tắt

Analog Devices ADF4360-2BCP is a fully integrated integer-N synthesizer and voltage-controlled oscillator with a 2000 MHz center frequency, 3.6 V power supply, 1.8 V logic compatibility, and a 24-lead LFCSP exposed-pad package. Its integrated VCO and synthesizer architecture provides RF outputs around 2 GHz, while a divide-by-2 mode produces an RF output from 925 MHz to 1085 MHz. The device uses a 3-wire serial interface for register control and includes programmable output power, digital lock detection, and hardware and software power-down functions.

An integer-N frequency synthesizer is a clock-generation and phase-locking category that combines a frequency divider, phase detector, charge pump, loop filter, and voltage-controlled oscillator. The integer-N architecture provides direct frequency synthesis from a stable reference source, allowing an external reference and feedback divider to establish the desired output relationship. In a wireless receiver, transmitter, test instrument, or frequency-conversion block, this hierarchy operates as a clock generator, then a phase-locked loop, and ultimately an RF frequency synthesizer and power-management supporting semiconductor.

The ADF4360-2 family integrates the VCO and most synthesizer functions into one component, reducing board area and external assembly compared with a discrete oscillator and divider arrangement. Programmable output power provides an adjustment range for downstream circuitry. Digital lock detection lets a host controller monitor loop-lock status, while hardware and software power-down modes support systems that need to reduce consumption or control sequencing. The 3.6 V supply and 1.8 V-compatible serial interface support integration with modern controller logic.

The divide-by-2 option broadens the usable output range by translating the approximately 2 GHz synthesizer signal into a 925 MHz to 1085 MHz RF output. This capability is useful when a downstream receiver, mixer, or measurement chain requires frequencies below the fundamental VCO range. Integer-N synthesis also makes channel selection programmable, although reference-divider, feedback-divider, loop-filter, and output-buffer settings determine phase noise, tuning range, lock behavior, and spur performance in the completed design.

Typical applications include wireless local-area network transceiver frequency generation, cellular and microwave communication equipment, RF test and measurement instruments, frequency-conversion stages, and clocking or modulation subsystems in industrial electronics. In these systems, the device can derive coherent RF or baseband-related clocks from a shared reference while the integrated lock detector reports operating status to the controller.

The principal design trade-off is that a compact integrated synthesizer does not remove the need for careful support-circuit and layout work. Reference routing, supply decoupling, the loop filter, VCO output matching, exposed-pad thermal management, and RF return paths can materially affect lock performance and phase noise. Follow the pin-description and application information in the Analog Devices datasheet when assigning tracks and selecting component values.

This page combines the device architecture, package details, drop-in family alternatives, and application-focused design guidance to support faster component selection. It also distinguishes the fundamentals from the divide-by-2 operating range, helping engineers identify the correct ADF4360 center-frequency option before beginning PCB implementation.

Bộ thay thế dễ dàng lắp đặt cho ADF4360-2BCP — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ADF4360-2BCP (cùng hình factor và footprint) — khác nhau ở Package, Divide-by-2 RF Output Range, Logic Compatibility, Device Type, Lock Detection.

Analog Devices
Package: 24-WFQFN exposed-pad CSP, 4 mm x 4 mm
Divide-by-2 RF Output Range: 800 MHz to 975 MHz
So sánh với ADF4360-2BCP →
Analog Devices
Package: 24-lead WFQFN with exposed pad
Divide-by-2 RF Output Range: 725 MHz to 875 MHz
Logic Compatibility: 1.8 V-compatible logic
So sánh với ADF4360-2BCP →
Analog Devices
Package: 24-lead LFCSP with exposed pad
So sánh với ADF4360-2BCP →

ADF4360-1BCP

✅ Drop-In ⚠️ Thông số chưa được xác minh
Analog Devices
📦 24-LFCSP-EP
2250 MHz · 1025 MHz to 1225 MHz · 2450 MHz · 10 MHz to 250 MHz · 3.6 V · 1.8 V · Integer-N · Divide-by-2

Liên hệ để biết giá

Xem tài liệu →

ADF4360-3BCP

✅ Drop-In
Analog Devices
📦 24-LFCSP-EP
Integer-N frequency synthesizer with integrated voltage-controlled oscillator · 1750 MHz · 1.95 GHz · 800 MHz to 975 MHz · Integer-N PLL · Fully integrated voltage-controlled oscillator · CMOS · Clock output

Liên hệ để biết giá

Xem tài liệu →

ADF4360-4BCP

✅ Drop-In ⚠️ Thông số chưa được xác minh
Analog Devices
📦 24-LFCSP-EP
Integer-N frequency synthesizer and voltage-controlled oscillator · 1600 MHz · 725 MHz to 875 MHz · 65 MHz to 400 MHz · 3.6 V · 3 V to 3.6 V · 1.8 V-compatible logic · 1.75 GHz

Liên hệ để biết giá

Xem tài liệu →

ADF4360-7BCPZ

✅ Drop-In ⚠️ Thông số chưa được xác minh
Analog Devices
📦 24-LFCSP-EP
Integer-N frequency synthesizer with integrated VCO · Analog Devices · 350 MHz to 1800 MHz · 175 MHz to 900 MHz · 1800 MHz · 3.0 V to 3.6 V · 3.6 V · 1.8 V

Liên hệ để biết giá

Xem tài liệu →

ADF4360-8BCPZ

✅ Drop-In
📦 24-LFCSP-EP
Same 24-lead LFCSP exposed-pad footprint; VCO center frequency differs from 2000 MHz to approximately 8000 MHz, producing a substantially different tuning range.

📋 Tham chiếu thay thế (không có trong danh mục)

ADF4360-2BCP Thông số kỹ thuật

Device Type Fully integrated integer-N synthesizer and voltage-controlled oscillator
VCO Center Frequency 2000 MHz
Divide-by-2 RF Output Range 925 MHz to 1085 MHz
Power Supply 3.6 V
Logic Compatibility 1.8 V
Synthesis Architecture Integer-N
Control Interface 3-wire serial interface
Output Power Programmable
Lock Detection Digital
Power-Down Modes Hardware and software
Hộp 24-LFCSP-EP
Lead Count 24 leads
Exposed Pad Yes
Kiểu lắp đặt Surface mount

Hướng dẫn cấu hình chân ADF4360-2BCP 24-lfcsp-ep

Cấu hình chân cho ADF4360-2BCP (24-lfcsp-ep gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 24-lfcsp-ep cho ADF4360-2BCP

Không có dữ liệu chân cụ thể sẵn có cho ADF4360-2BCP.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ADF4360-2BCP phù hợp cho 6 Áp dụngs: Wireless Transceiver Frequency Generation, RF Test and Measurement Equipment, Industrial RF Frequency Conversion, Microwave Communication Loops, Frequency-Conversion Front Ends, Synchronized Clocking and Modulation.

🌐

Wireless Transceiver Frequency Generation

The ADF4360-2BCP fits wireless transceiver clock and frequency-generation blocks operating near 2000 MHz because it integrates an integer-N synthesizer with a 2000 MHz VCO. A system reference drives the PLL, while programmable dividers establish the required channel relationship and programmable output power helps accommodate downstream mixer and driver stages. The device's 3-wire serial interface supports compact controller integration, and digital lock detection can report acquisition status. Designers should use its 925 MHz to 1085 MHz divide-by-2 mode when the receiver chain requires a sub-1 GHz local oscillator derived from the fundamental VCO.

🔧

RF Test and Measurement Equipment

The ADF4360-2BCP can provide programmable RF excitation for test and measurement instruments because its integrated 2000 MHz VCO and integer-N PLL architecture turn a stable reference into a selectable output. The divide-by-2 path covers 925 MHz to 1085 MHz, while the fundamental section serves designs centered around 2 GHz. Programmable output power allows calibration across multiple test levels, and the digital lock-detect feature simplifies sequencing with an instrument controller. Accurate phase-noise and spur results still depend on the reference source, loop filter, output matching network, and carefully controlled RF layout.

🏭

Industrial RF Frequency Conversion

The ADF4360-2BCP is suitable for industrial RF conversion stages requiring a compact local oscillator around 2000 MHz. Its integrated synthesizer and VCO reduce the component count associated with discrete oscillator-and-divider solutions, while the integer-N architecture enables programmable channel selection from a common reference. The 3.6 V supply and 1.8 V-compatible control interface suit modern embedded controllers, while lock detection supports reliable state-machine control. Choose the component when the operating band fits its tuning limits and design the exposed-pad grounding and RF output network for stable thermal and RF performance.

📡

Microwave Communication Loops

The ADF4360-2BCP can support programmable local-oscillator or frequency-reference functions in microwave communication equipment centered near 2 GHz. Combining the VCO, divider chain, phase detector, and charge pump in one package supports a compact implementation, while the 3-wire serial interface allows a microcontroller or FPGA to configure channel-related registers. Its divide-by-2 output from 925 MHz to 1085 MHz provides a useful alternative frequency range. In a communication design, tune the loop for the required channel spacing and acquisition time, and isolate the reference and RF paths from switching regulators to preserve usable phase noise.

🔧

Frequency-Conversion Front Ends

The ADF4360-2BCP is appropriate for frequency-conversion front ends that require a programmable local oscillator near 2000 MHz or an output in the 925 MHz to 1085 MHz divide-by-2 range. Integer-N synthesis allows the output frequency to be derived predictably from a system reference, and programmable output power provides adjustment for downstream mixer stages. The integrated architecture supports compact RF boards, but the output network, reference routing, and loop filter remain essential. Validate output power, spur levels, and lock behavior across the complete operating band rather than at a single nominal channel.

🖥️

Synchronized Clocking and Modulation

The ADF4360-2BCP can act as a programmable clock or modulation source in systems that require coherent frequencies derived from a shared reference. Its fully integrated synthesizer and VCO simplify generation near 2 GHz, and the divide-by-2 mode adds a lower-frequency option for downstream clocking or mixing. Digital lock detection permits orderly use only after the PLL acquires lock, while hardware and software power-down modes support controlled operating states. The reference distribution network should provide low phase noise, and the PCB should separate sensitive reference routing from high-current switching paths.

What is the ADF4360-2BCP?
The ADF4360-2BCP is a fully integrated integer-N frequency synthesizer and voltage-controlled oscillator from Analog Devices. According to the Analog Devices ADF4360-2 datasheet, it has a 2000 MHz VCO center frequency, a 3.6 V power supply, 1.8 V-compatible logic, a 3-wire serial interface, programmable output power, digital lock detection, and hardware and software power-down functions. It is packaged in a 24-lead LFCSP with an exposed pad.
What frequency range does the ADF4360-2BCP generate?
The ADF4360-2BCP is centered on a 2000 MHz VCO frequency and provides a divide-by-2 output from 925 MHz to 1085 MHz. According to the Analog Devices ADF4360-2 datasheet, the divide-by-2 function derives lower RF outputs from the approximately 2 GHz synthesizer signal. The exact fundamental tuning limits, reference-input range, and divider settings should be confirmed from the device's specified operating conditions before locking a design.
Where can I download the ADF4360-2BCP datasheet PDF?
The official ADF4360-2 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4360-2.pdf. It is the primary document for the ADF4360-2 family and covers the synthesizer architecture, VCO, divide-by-2 function, register interface, lock detection, power-down operation, electrical characteristics, and application information relevant to the ADF4360-2BCP.
Where can I find the ADF4360-2BCP pinout?
Use the pin-description table and package drawing in the official Analog Devices ADF4360-2 datasheet to locate the ADF4360-2BCP pinout. The component uses a 24-lead LFCSP exposed-pad package, so the exposed thermal pad must also be treated as a PCB connection according to the manufacturer layout guidance. Assign the supply, ground, reference, control, and RF-output nets by their exact datasheet pin numbers rather than relying only on the package outline.
What are the key specifications of ADF4360-2BCP that engineers should know?
The key ADF4360-2BCP specifications are a 2000 MHz VCO center frequency, a 925 MHz to 1085 MHz divide-by-2 output range, a 3.6 V supply, 1.8 V logic compatibility, a 3-wire serial interface, programmable RF output power, digital lock detection, and hardware and software power-down. The device also integrates the integer-N synthesizer and VCO in a 24-lead LFCSP exposed-pad package.
Is the ADF4360-2BCP suitable for wireless transceiver applications?
The ADF4360-2BCP is suitable for wireless transceiver frequency-generation blocks that operate near 2 GHz or use its 925 MHz to 1085 MHz divide-by-2 output. Its integrated integer-N synthesizer and VCO provide programmable frequency generation from a system reference, while digital lock detection allows a controller to monitor loop status. RF layout, reference quality, loop-filter design, and output matching remain critical to phase-noise and spur performance.
What can replace the ADF4360-2BCP?
The closest drop-in choices are other 24-lead LFCSP exposed-pad members of the Analog Devices ADF4360 family, subject to the center-frequency requirement of the target design. ADF4360-1BCP, ADF4360-3BCP, ADF4360-4BCP, ADF4360-7BCPZ, and ADF4360-8BCPZ use the same family architecture, but changing the VCO center frequency changes the intended frequency band. Verify every pin, divider limit, and lock range before substitution.
Is ADF4360-2BCP the same as ADF4360-2BCPZ?
ADF4360-2BCP and ADF4360-2BCPZ identify different orderable forms of the ADF4360-2 device, but the supplied listing does not establish that their packaging or temperature suffixes are interchangeable. Because suffix changes can affect orderable temperature grade, lead finish, tape-and-reel configuration, or qualification, use the manufacturer ordering information to confirm the exact form before treating either MPN as a drop-in replacement.
When should I choose the ADF4360-2BCP over ADF4360-3BCP?
Choose the ADF4360-2BCP when the design requires a synthesizer centered around 2000 MHz or can use its 925 MHz to 1085 MHz divide-by-2 output. Choose ADF4360-3BCP when the required operating band is centered near that family's corresponding 3000 MHz design point. Although both are ADF4360-family devices, selecting the correct VCO range is essential because divider limits, tuning range, and lock performance differ with the center frequency.
ADF4360-2BCP vs ADF4360-8BCPZ: which is better for a 2 GHz design?
The ADF4360-2BCP is the closer choice for a design centered around 2000 MHz because its specified VCO center frequency is 2000 MHz. ADF4360-8BCPZ belongs to the higher-frequency member of the same ADF4360 family and is intended around an 8000 MHz center frequency. The two share the family-level 24-lead LFCSP exposed-pad architecture, but a footprint match alone does not make them electrically equivalent at 2 GHz.
What is the best Analog Devices equivalent for ADF4360-2BCP?
The best equivalent is the ADF4360 family member whose specified VCO center frequency, divider ranges, reference interface, and RF output requirements match the original design. ADF4360-2BCP is itself centered at 2000 MHz, so a different numbered family member may require different register values or may not support the target band. For an exact functional and footprint match, verify the precise ordering suffix and pin configuration in the Analog Devices ordering table.
How should the ADF4360-2BCP loop filter be designed?
Design the loop filter from the target reference frequency, feedback divider, VCO gain, required lock time, phase-noise objective, and allowable spur levels. The ADF4360-2BCP provides the phase detector, charge pump, reference and feedback dividers, and VCO, while the passive loop-filter network is external. Follow the Analog Devices datasheet and its loop-filter calculation guidance, and verify both lock acquisition and steady-state phase noise rather than sizing the network from one specification alone.
How should I power and decouple the ADF4360-2BCP?
The ADF4360-2BCP operates from a 3.6 V supply and includes 1.8 V-compatible control logic. Place the required supply-decoupling capacitors close to the device's supply and ground pins, connect the exposed pad to the recommended ground-plane structure, and keep sensitive reference and RF routes away from noisy switching nodes. Exact capacitor values and layout geometry should follow the manufacturer datasheet and reference-circuit guidance.
Where can I buy ADF4360-2BCP and check its lead time?
Use the Request a Quote form on this page to request ADF4360-2BCP availability, order quantities, current lead time, and traceability requirements. The product listing confirms the exact Analog Devices MPN and its 24-terminal surface-mount package, but it does not present a firm stock count or manufacturing lead-time commitment. A quote request allows the current commercial position and required documentation to be confirmed.
Is ADF4360-2BCP in stock, and what does it cost?
Current ADF4360-2BCP stock and commercial terms should be requested through the Request a Quote form on this page. The product listing identifies the component and package, but the retrieved listing does not establish a definitive stock quantity or a quantity-break price table. Submit the required quantity and packaging details with the quote request so the current supply position can be confirmed without relying on a stale listing figure.
What is the lead time for ADF4360-2BCP?
Request the current ADF4360-2BCP lead time through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing availability, packaging configuration, and quality-document requirements, so a general figure may not represent a specific production schedule. Include the forecast quantity and required inspection or traceability documents when submitting the request.

Dữ liệu tham khảo kỹ thuật cho ADF4360-2BCP — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the ADF4360-2BCP for RF systems whose required operating band is centered around 2000 MHz or can use the specified 925 MHz to 1085 MHz divide-by-2 output. Its integrated integer-N synthesizer and VCO reduce external circuitry, while programmable output power, digital lock detection, and hardware and software shutdown support controlled system operation. Select ADF4360-1BCP for a lower-frequency design centered near 1000 MHz, ADF4360-3BCP or ADF4360-4BCP for higher bands, and ADF4360-7BCPZ or ADF4360-8BCPZ for substantially higher VCO ranges. All five alternatives use the same 24-LFCSP exposed-pad family package, but package compatibility does not make their electrical operating ranges equivalent. Before substitution, verify the target frequency against the selected member's VCO and divider limits, confirm the exact orderable suffix, and recalculate the loop filter. After any change, revalidate lock time, phase noise, spur performance, output power, and thermal conditions across the full required channel range.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này ADF4360-1BCP ADF4360-3BCP ADF4360-4BCP ADF4360-7BCPZ ADF4360-8BCPZ
Package 24-LFCSP-EP 24-LFCSP-EP 24-LFCSP-EP 24-LFCSP-EP 24-LFCSP-EP 24-LFCSP-EP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Architecture Integer-N synthesizer and integrated VCO Integer-N synthesizer and integrated VCO Integer-N synthesizer and integrated VCO Integer-N synthesizer and integrated VCO Integer-N synthesizer and integrated VCO Integer-N synthesizer and integrated VCO
Power Supply 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V 3.6 V
Logic Compatibility 1.8 V 1.8 V 1.8 V 1.8 V 1.8 V 1.8 V
Control Interface 3-wire serial interface 3-wire serial interface 3-wire serial interface 3-wire serial interface 3-wire serial interface 3-wire serial interface
Lock Detection Digital Digital Digital Digital Digital Digital
Power-Down Modes Hardware and software Hardware and software Hardware and software Hardware and software Hardware and software Hardware and software

Bảo phân biệt quan trọng

  • Center-frequency alignment for 2 GHz and 925 MHz to 1085 MHz designs (vsADF4360-3BCP)
  • Lower VCO center frequency than the 8 GHz family option (vsADF4360-8BCPZ)
  • Broader direct fit for 2 GHz wireless equipment than the 1 GHz family member (vsADF4360-1BCP)

Ghi chú thiết kế

Place the required input, output, and loop-filter components close to their associated ADF4360-2BCP pins, and provide a continuous ground connection beneath the exposed pad. Keep the reference input route short and isolated from the VCO output and switching-supply return paths. The exposed pad is a thermal and electrical connection, so its via pattern and ground-plane geometry should follow the Analog Devices package and application guidance rather than being treated as an unused center lead.

Design the external loop filter around the intended reference frequency, divider settings, VCO gain, lock time, and phase-noise target. Test acquisition from both cold start and adjacent-channel changes, because a filter optimized only for steady-state phase noise can acquire slowly or produce excessive ringing. Preserve symmetry where practical, use low-noise passive components, and avoid long loops or guard structures that add unnecessary parasitic inductance around the charge-pump and VCO-control nodes.

Estimated: the required exposed-pad dissipation depends on supply voltage, output power, and operating mode, which are not numerically specified for this orderable MPN. Use the manufacturer power-dissipation and junction-temperature limits when calculating the thermal design. Provide generous ground-plane area and thermal vias beneath the package, and verify temperature rise at the highest expected channel, output-power setting, and ambient temperature while the PLL and surrounding RF circuitry are operating.

Do not treat ADF4360 family members with different numbered VCO center frequencies as automatic functional equivalents. Although the listed alternatives share the 24-LFCSP exposed-pad family footprint, divider limits, tuning range, and loop settings differ. Confirm the exact suffix, pin assignments, operating band, output-frequency limits, and temperature requirements before replacing ADF4360-2BCP, and revalidate lock, phase noise, and output power after any substitution.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The available product information identifies the ADF4360-2BCP as a clock generator and PLL in a 24-LFCSP exposed-pad package. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established for this exact orderable MPN.

Dữ liệu được xác minh vào: 2026-11-10 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

ADF4360-2BCP datasheet ADF4360-2BCP datasheet pdf ADF4360-2BCP pinout ADF4360-2BCP specifications ADF4360-2BCP equivalent ADF4360-2BCP replacement ADF4360-2BCP footprint ADF4360-2BCP price ADF4360-2BCP lead time Analog Devices ADF4360-2BCP ADF4360-2BCP vs ADF4360-3BCP ADF4360-2BCP vs ADF4360-8BCPZ ADF4360 1BCPZ ADF4360 7BCPZ ADF4360 7BCPZRL7

Các bộ phận và thuật ngữ liên quan

Analog Devices ADF4360-2BCP ADF4360-2 ADF4360-1BCP ADF4360-3BCP ADF4360-4BCP ADF4360-7BCPZ ADF4360-8BCPZ integer-N synthesizer frequency synthesizer voltage-controlled oscillator VCO phase-locked loop PLL clock generator 3-wire serial interface divide-by-2 output programmable output power digital lock detection 2000 MHz center frequency 925 MHz to 1085 MHz 24-LFCSP-EP LFCSP family QFN family surface-mount package
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ