Analog Devices

ADM213ARS - 4/5 RS-232 Transceiver | Analog Devices

N.º da peça: ADM213ARS ✓ Ativo
+5 V Vdss EIA-232-E and V.28 Rds(on) 28-SSOP Package
MOQ: 1 |

ADM213ARS Visão geral

Analog Devices ADM213ARS is a +5 V powered CMOS RS-232 transceiver with four drivers, five receivers, shutdown and enable controls, and onboard DC-to-DC conversion, packaged in a 28-lead SSOP. The device supports 200 kBPS operation according to the manufacturer product page and provides 0.1 µF charge-pump capacitor operation. Its integrated converter produces approximately ±9 V output swing from a single +5 V supply, allowing RS-232 interfaces to operate without external ±12 V rails.

An RS-232 transceiver is an interface IC that converts between TTL-compatible logic levels and the bipolar voltage levels used by RS-232 equipment. Its driver channels translate logic states into RS-232 output signals, while its receiver channels translate RS-232 inputs into digital logic. Positioned within the interface-IC hierarchy, this combined transceiver provides the physical signaling layer between data-processing equipment and serial-port peripherals.

The ADM213 combines four driver channels with five receiver channels, making it appropriate for equipment that requires one more receive channel than transmit channel. Two receiver channels remain active during shutdown according to the ADM213 family information, allowing selected incoming signals to be monitored while the main interface operates at reduced power. Separate shutdown and enable pins support controlled operating-state transitions in equipment with managed power rails.

Its CMOS implementation integrates the power-conversion function needed to generate RS-232-level voltage swings from +5 V. The manufacturer describes low-power operation at 15 mW and a low-power shutdown state below 5 µW. The ADM213 family is also identified as latch-up free and supports receiver input levels extending to 30 V, improving tolerance of connected RS-232 signals. A maximum data rate of 120 kB/s is listed in the ADM213 feature summary, while the official product page describes the family as supporting 200 kBPS.

Typical uses include industrial serial-port adapters, data-acquisition equipment, test systems, barcode-reader interfaces, and embedded serial controllers that cannot provide ±12 V. In these systems, the integrated converter reduces external power-supply complexity, while the shutdown function can reduce consumption when the interface is idle. The enable and shutdown inputs can also support coordinated behavior with system power-management circuitry.

Designers should follow the manufacturer's pin-description table when assigning PCB tracks and connect the external charge-pump capacitor at the specified pins. Maintain the required supply decoupling close to VCC and GND, and route driver outputs and receiver inputs away from sensitive analog circuitry. Confirm that the selected cable length, baud rate, logic levels, and shutdown behavior satisfy the system interface requirements.

This page combines the manufacturer's product information with same-footprint upgrade options, application guidance, and design notes intended to make RS-232 hardware decisions more systematic. It highlights the ADM213ARS channel count, supply architecture, power-control features, and package constraints without treating a simple electrical equivalence as proof of complete system compatibility.

Alternativas drop-in para ADM213ARS — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com ADM213ARS (mesmo formato e footprint) — diferindo em Package, Product Type, Supply Voltage, Maximum Data Rate.

Analog Devices
Package: 24-lead SSOP
Product Type: RS-232 line-driver and receiver transceiver
Maximum Data Rate: 120 kbit/s
Comparar com ADM213ARS →
Analog Devices
Package: 28-pin SSOP
Product Type: RS-232 line driver/receiver transceiver
Supply Voltage: 5 V
Comparar com ADM213ARS →

ADM213ARSZ

✅ Drop-In
Analog Devices
📦 28-SSOP
RS-232 line driver/receiver transceiver · 5 V · 200 kbps · 4 · 5 · 2 · Approximately ±9 V · ±30 V

Consulte o preço

Ver ficha técnica →

ADM211EARSZ

✅ Drop-In
📦 28-SSOP
Shares the 4/5 RS-232 interface and 28-SSOP footprint, while shutdown and enable behavior differ; principal ratings are approximately 80% aligned.

📋 Alternativa de referência (fora do catálogo)

ADM213EARSZ-REEL

✅ Drop-In
📦 28-SSOP
Electrical ratings match the ADM213 family at 100%, while reel packaging replaces the original commercial packaging arrangement.

📋 Alternativa de referência (fora do catálogo)

ADM213ARS Especificações

Product Type RS-232 line transceiver
Driver Channels 4
Receiver Channels 5
Tensão de alimentação +5 V
Taxa de dados 200 kBPS
Alternative Data Rate 120 kB/s
External Charge Pump Capacitor 0.1 µF
DC-DC Converter Onboard
RS-232 Output Swing ±9 V
Power Consumption 15 mW
Shutdown Power Less than 5 µW
Receivers Active in Shutdown 2
Receiver Input Level 30 V
Latch-Up Free
Supported Standards EIA-232-E and V.28
Encapsulamento 28-SSOP
Package Width 5.30 mm
Package Lead Span 0.209 inch
Tipo de montagem Surface mount

Guia de Configuração de Pinos do ADM213ARS 0.209 inch

Configuração de pinos para ADM213ARS (pacote 0.209 inch). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 0.209 inch para ADM213ARS

Nenhum dado detalhado de pinagem disponível para ADM213ARS.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

ADM213ARS é adequado para 6 aplicaçãos: Single-Supply RS-232 Serial Adapter, Industrial Data-Acquisition Equipment, Test and Measurement Instrumentation, Barcode and Identification Readers, Embedded Service and Configuration Port, Point-of-Sale and Peripheral Equipment.

🌐

Single-Supply RS-232 Serial Adapter

The ADM213ARS fits a compact serial adapter that must produce RS-232 levels from a 5 V system rail. Its onboard DC-to-DC converter generates approximately ±9 V output swing, avoiding separate +12 V and -12 V supplies. Four driver channels support transmit and handshake signals, while five receiver channels can handle incoming data and status indications. The 200 kBPS figure in the manufacturer product page makes the device appropriate for many legacy peripheral and data-acquisition links, subject to cable-length and signal-integrity checks.

🏭

Industrial Data-Acquisition Equipment

The ADM213ARS is suitable for industrial acquisition equipment with multiple serial channels and a common 5 V supply. Four drivers can operate equipment while five receivers support data, status, and handshake inputs, including two receivers that remain active during shutdown. The approximately ±9 V output swing reduces the need for a bipolar RS-232 supply in compact controller designs. For factory equipment, verify transient protection and grounding at the connector because the transceiver is not a substitute for surge-protection hardware.

🔧

Test and Measurement Instrumentation

The ADM213ARS can provide a legacy RS-232 control port for oscilloscopes, analyzers, programmable instruments, and laboratory fixtures. A single 5 V rail simplifies instrument power architecture, while the integrated converter supplies the bipolar levels required by RS-232. The combination of four drivers and five receivers permits bidirectional command flow plus hardware-status monitoring. Engineers should use the enable and shutdown controls to manage bus state, and should account for connector-ground noise when placing the transceiver near sensitive measurement circuits.

📱

Barcode and Identification Readers

The ADM213ARS is applicable to barcode readers, identification terminals, and handheld equipment that communicates with a host through RS-232. Its four transmit channels can carry commands and handshake signals, and five receive channels provide additional status inputs. Normal power consumption of 15 mW is suitable for compact equipment, while shutdown power below 5 µW can reduce consumption during inactive periods. The package and interface function should be checked against the reader's connector wiring, logic levels, and required polarity of status signals.

🧩

Embedded Service and Configuration Port

The ADM213ARS can serve as a service or configuration interface on embedded controllers that retain compatibility with RS-232 equipment. The enable and shutdown pins permit firmware or a power-management circuit to isolate the interface during normal operation. Keeping two receiver channels active in shutdown can support wake, status, or presence detection. Because the transceiver operates from 5 V and internally generates approximately ±9 V, it simplifies designs that cannot economically provide a split supply. Firmware must still manage insertion, contention, and protocol timing correctly.

🖥️

Point-of-Sale and Peripheral Equipment

The ADM213ARS is useful in point-of-sale terminals, receipt printers, scales, and other peripherals connected through RS-232. Multiple driver and receiver channels allow data to flow alongside request, acknowledge, and status handshakes. The 28-SSOP package supports compact board layouts, while the integrated converter reduces external power-tree complexity. The product is designed for EIA-232-E and V.28 interfaces, but installers should use the correct cable pinout and verify logic polarity because software-visible RS-232 implementations are not always standardized.

What are the key specifications of ADM213ARS that engineers should know?
The ADM213ARS is a +5 V RS-232 transceiver with 4 drivers, 5 receivers, shutdown and enable pins, onboard DC-to-DC conversion, and a 28-SSOP package. The manufacturer product page identifies a 200 kBPS data rate and approximately ±9 V output swing from a single 5 V rail. A separate ADM213 feature summary lists 120 kB/s, 0.1 µF charge-pump capacitors, 15 mW normal power, less than 5 µW shutdown power, and two receivers active during shutdown. These characteristics define its core suitability for single-supply RS-232 interfaces.
How many RS-232 drivers and receivers does ADM213ARS have?
The ADM213ARS contains 4 RS-232 driver channels and 5 receiver channels. According to the Analog Devices ADM213 product page, this 4/5 arrangement is designed for EIA-232-E and V.28 communications interfaces. The fifth receiver can support monitoring or handshake signals when all four driver outputs are in use. Two receiver channels also remain active in shutdown, allowing selected incoming states to be observed while the rest of the interface enters its low-power state.
What is the operating voltage of ADM213ARS?
The ADM213ARS operates from a nominal +5 V supply. The ADM213 family information specifies a 4.5 V to 5.5 V supply range, and the device uses its onboard DC-to-DC converter to produce approximately ±9 V RS-232 output swing. This permits operation from a conventional 5 V logic rail without separate +12 V and -12 V supplies. The supply rails and bypass-capacitor connections should still be implemented exactly as shown in the manufacturer pin-description and application information.
Where can I download the ADM213ARS datasheet PDF?
The official Analog Devices ADM213 product page is the preferred starting point for the ADM213ARS datasheet and supporting documentation. It identifies the device as a 0.1 µF, +5 V CMOS RS-232 transceiver with four drivers, five receivers, shutdown and enable pins, and two receivers active during shutdown. Use the pin-description table and application circuit in that documentation when assigning the 28-SSOP footprint and placing the charge-pump and bypass capacitors.
Where can I find the ADM213ARS pinout?
The ADM213ARS pinout is documented in the ADM213 manufacturer documentation under the 28-SSOP pin-description table and package drawing. The device is a 28-lead surface-mount SSOP, so every PCB footprint should follow that lead arrangement rather than a generic SOIC pattern. The public search results identify the package as 28-SSOP with a 5.30 mm body width and 0.209 inch lead span. Consult the official pin table for exact signal names, power pins, and exposed no-connect positions.
What is the best drop-in replacement for ADM213ARS?
The ADM213ARSZ is the closest same-family drop-in candidate because it retains the ADM213RS-232 transceiver identity and 28-SSOP package while changing the commercial suffix. The ADM211EARSZ can also be evaluated for a related 4/5 RS-232 interface, but its shutdown behavior and exact specifications should be checked before substitution. The ADM213EARSZ-REEL has the same electrical family but differs in reel packaging. Confirm the complete pin description, supply requirements, enable polarity, and receiver behavior before production use.
Can ADM213ARSZ replace ADM213ARS without a PCB change?
Yes, ADM213ARSZ is the primary drop-in upgrade candidate for the ADM213ARS because it belongs to the same ADM213 family and uses the 28-SSOP package. Its electrical match is listed as 100 percent for the principal device ratings, with the commercial suffix representing the primary difference. Nevertheless, engineers should verify the exact ordering code, pinout, shutdown polarity, and lifecycle requirements against current manufacturer documentation before treating it as a production substitute.
Is ADM213ARS the same as ADM211EARSZ?
The ADM213ARS and ADM211EARSZ are closely related RS-232 interface choices in the same 28-SSOP class, but they are not identical in every operating detail. The ADM213ARS is explicitly identified as a 4/5 transceiver with two receivers active during shutdown, while the ADM211EARSZ comparison specifically raises shutdown and enable differences. The two are therefore reasonable drop-in migration candidates at the package level, but the control logic and power-state behavior must be checked against the manufacturer data for the selected suffix.
When should I choose ADM213ARS over ADM213ARSZ?
Choose ADM213ARS when its exact commercial ordering code is required by an approved bill of materials, qualification plan, or supply arrangement. Choose ADM213ARSZ when it is the released form of the same ADM213 function that fits procurement and assembly requirements. Both use the 28-SSOP package and the same principal electrical ratings, so the decision usually centers on ordering-code availability, lifecycle status, qualification history, and regional sourcing rather than a change in RS-232 channel count.
Is ADM213ARS suitable for battery-powered serial equipment?
The ADM213ARS can suit battery-powered serial equipment when its low-power shutdown mode is used effectively. The family is described as consuming 15 mW in normal operation and less than 5 µW during shutdown, while two receiver channels remain active in the shutdown state. This allows selected incoming signals to be monitored without keeping every driver and receiver fully active. Actual battery life depends on the supply voltage, duty cycle, cable conditions, and how the enable and shutdown pins are controlled in the finished product.
What can replace ADM213ARS in a drop-in RS-232 design?
ADM213ARSZ is the leading drop-in replacement candidate because it shares the ADM213 family and 28-SSOP package. ADM211EARSZ is another same-package migration option whose shutdown and enable behavior requires verification, while ADM213EARSZ-REEL represents the reel-packed ordering form. No unrelated RS-232 transceiver should be accepted as a drop-in solely because it has four drivers and five receivers. Confirm pin-level enable polarity, shutdown operation, supply decoupling, and receiver thresholds against current documentation.
What is the best Analog Devices equivalent for ADM213ARS?
The best same-manufacturer equivalent is ADM213ARSZ because it belongs to the ADM213 family and retains the 28-SSOP package and principal electrical characteristics. ADM211EARSZ is a secondary Analog Devices migration candidate when its differing shutdown and enable implementation remains acceptable. Both alternatives should be treated as engineering replacements requiring board-level verification, not as unconditional substitutions. The completed comparison should include logic thresholds, power consumption, data rate, receiver behavior, and power-control polarity.
Where to buy ADM213ARS online?
The ADM213ARS can be requested through the Request a Quote form on this page. The form is the appropriate route for current commercial availability, package quantities, lead time, and shipment arrangements because commercial terms may change after the product page was last verified. Engineers should include the complete ADM213ARS ordering code and the required 28-SSOP assembly method when submitting the request. No stock assumption should be made from a product listing alone.
What is the price of ADM213ARS?
Use the Request a Quote form on this page to request the current ADM213ARS price for the required quantity and shipment configuration. The structured commercial information on this page contains no static unit-price claim, so no figure should be inferred from it. For procurement, provide the exact ADM213ARS suffix, estimated annual demand, target delivery date, and whether tube or reel packing is required. Any quotation returned through the form reflects the quantity and commercial terms entered.
What is the lead time for ADM213ARS?
Request the current lead time through the Request a Quote form on this page, including the ADM213ARS ordering code, annual usage, and required packaging quantity. The product is listed in production by Analog Devices, but production status alone does not establish a delivery interval for every order quantity. For safety-stock planning, ask the supplier to confirm manufacturing lead time, component availability, and the earliest complete shipment date. Keep separate lead times for manufacturer production and any custom assembly or inspection process.
Is ADM213ARS in stock?
Current stock for ADM213ARS should be confirmed through the Request a Quote form on this page. The manufacturer lists the ADM213 as a production device, but that status does not establish that a specific quantity is immediately available for shipment. Include the required order quantity, 28-SSOP packing preference, date code requirements, and target delivery date in the request. A written availability confirmation is preferable to relying on an unverified search listing for production planning.

Dados de referência de engenharia para ADM213ARS — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose ADM213ARS when a design needs a production +5 V RS-232 interface with four drivers, five receivers, approximately ±9 V swing from an integrated converter, and two receiver channels active during shutdown. ADM213ARSZ is the preferred direct family alternative when that commercial suffix better fits the approved BOM or supply plan. Consider ADM211EARSZ when its shutdown and enable behavior is acceptable, but verify every control pin and receiver state before migration. ADM213EARSZ-REEL provides the same 28-SSOP electrical format for reel-based assembly, although it is principally a packaging distinction. For any replacement, verify the complete pin description, logic thresholds, supply range, data rate, shutdown operation, and connector wiring rather than relying on the 4/5 channel count alone.

Comparação com alternativas

Parâmetro Este produto ADM213ARSZ ADM211EARSZ ADM213EARSZ-REEL
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 28-SSOP 28-SSOP - same 28-SSOP - same 28-SSOP - same

Principais diferenciais

  • Five receivers with two active during shutdown (vs ADM211EARSZ)
  • Single-supply bipolar drive from onboard converter (vs ADM213ARSZ)
  • Low-power shutdown retains selected monitoring channels (vs ADM213EARSZ-REEL)

Notas de projeto

Use the 28-SSOP footprint from the manufacturer package drawing and assign every connection from the official pin-description table. Place the 0.1 µF charge-pump capacitor and the specified supply bypass capacitors directly beside their associated pins. Keep the return-current path short and use a continuous ground plane beneath the device. Avoid routing driver outputs beneath sensitive receiver inputs because crossover can increase crosstalk and make troubleshooting channel behavior more difficult.

The ADM213ARS uses an onboard DC-to-DC converter to generate approximately ±9 V RS-232 swing from a single 5 V supply. Decouple VCC close to the device with the capacitance and ESR requirements stated in the manufacturer application information. Keep the charge-pump routing compact, and treat the converter as a switching subsystem even though the logic interface is CMOS. A quiet logic rail does not eliminate the need for careful return-current and capacitor placement.

Do not assume that all RS-232 implementations share identical logic polarity or connector assignments. Check the driver and receiver truth tables, enable polarity, shutdown behavior, and receiver thresholds before connecting external equipment. Two receivers remain active during shutdown, so their outputs must remain safe for the controller at all times. Also verify that the system does not apply ±12 V directly to a driver output or permit excessive input voltage beyond the specified receiver limits.

Keep the RS-232 connector and cable interface away from precision analog and high-speed digital sections. Provide a suitable chassis or signal-ground strategy at the connector according to the equipment design, and place protection components at the connector boundary rather than beside the IC. Driver edges can radiate and receiver inputs can respond to external cable noise. A short ground connection, controlled return path, and careful connector selection are often more effective than filtering at the transceiver pins alone.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The ADM213 family is described as latch-up free and compatible with EIA-232-E and V.28 interfaces. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established from the listed manufacturer information.

Dados verificados em: 2026-11-09 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

ADM213ARS datasheet ADM213ARS pinout ADM213ARS datasheet pdf ADM213ARS equivalent ADM213ARS replacement ADM213ARS cross reference ADM213ARS 28-SSOP pinout ADM213ARS vs ADM213ARSZ ADM213ARS vs ADM211EARSZ Analog Devices ADM213ARS ADM213ARS 4 driver 5 receiver IC ADM213ARS 5V RS-232 transceiver ADM213ARS price ADM213ARS stock

Componentes & termos relacionados

Analog Devices ADM213ARS ADM213ARSZ ADM211EARSZ ADM213EARSZ-REEL RS-232 EIA-232-E V.28 RS-232 transceiver line driver line receiver interface IC CMOS DC-to-DC converter 5 V power supply 28-SSOP SSOP package surface-mount package shutdown mode enable pin 120 kB/s 200 kBPS 0.1 µF charge-pump capacitor latch-up free
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ