ADM241LJRSZ - 4/5 RS-232 5V 120kB/s | Analog Devices
N.º da peça: ADM241LJRSZ ✓ AtivoADM241LJRSZ Visão geral
A full-duplex RS-232 transceiver is an interface IC that converts logic-level signals into RS-232-compatible line levels and converts incoming RS-232 signals back into CMOS-compatible digital levels. The ADM2xx family belongs to the broader line-driver/receiver and interface-IC hierarchy, making it useful where equipment communicates over short point-to-point serial links without a separate negative supply.
Key features include four RS-232 drivers, five RS-232 receivers, a single 5 V power supply, and a maximum data rate of 120 kB/s. Onboard DC-DC conversion supports approximately ±9 V output swing, while small 1 µF charge-pump capacitors help reduce the external component count. The architecture is intended to meet EIA-232-E and V.28 interface requirements in industrial, instrumentation, data-acquisition, and embedded-control systems.
The integrated charge-pump circuitry allows the transceiver to operate from one 5 V rail rather than conventional ±12 V or ±15 V supplies. This simplifies system power architecture, but the DC-DC converter and driver outputs introduce switching-related considerations around board layout and cable routing. Input and output pins must also be checked against the 4.75 V to 5.25 V supply specification before connecting external logic.
Typical uses include industrial control links, laboratory test equipment, POS terminals, medical-instrument interfaces, and embedded systems that exchange RS-232 commands or status data. The four-driver and five-receiver arrangement supports multiple transmit and receive channels in one package, which can reduce board area when several point-to-point RS-232 links terminate on the same controller.
PCB layout should keep the 1 µF charge-pump capacitors close to their associated pins, provide a low-impedance 5 V supply connection, and route the RS-232 traces away from sensitive analog and clock signals. Because the transceiver includes a DC-DC converter, use the manufacturer’s recommended grounding and bypass-capacitor arrangement to minimize conducted and radiated emissions.
This product page combines the ADM241L family electrical characteristics, 28-SSOP footprint information, package temperature distinctions, and application-oriented design guidance to support faster component selection and PCB implementation.
Alternativas drop-in para ADM241LJRSZ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
ADM241LARSZ-REEL
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ADM241LJRSZ Especificações
| Number of Drivers | 4 |
| Number of Receivers | 5 |
| Transceiver Type | Full RS-232 |
| Supply Voltage Range | 4.75 V to 5.25 V |
| Taxa de dados | 120 kB/s |
| RS-232 Output Swing | ±9 V |
| Charge-Pump Capacitor Value | 1 µF |
| Protocol | RS-232 |
| Interface Standard | EIA-232-E and V.28 |
| Encapsulamento | 28-SSOP, 0.209 mm to 5.30 mm width |
| Tipo de montagem | Surface mount |
| Faixa de temperatura de operação | 0 °C to 70 °C |
| Internal DC-DC Converter | Yes, onboard |
| Power Supply Count | 1 x 5 V |
| Lead-Free Status | Lead free |
Guia de Configuração de Pinos do ADM241LJRSZ 28-ssop, 0.209 mm to 5.30 mm width
Configuração de pinos para ADM241LJRSZ (pacote 28-ssop, 0.209 mm to 5.30 mm width). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para ADM241LJRSZ.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
ADM241LJRSZ é adequado para 6 aplicaçãos: Industrial Control Interfaces, Laboratory Test Equipment, Point-of-Sale Terminals, Medical Instrumentation, Embedded Data Acquisition, Security and Access Systems.
Industrial Control Interfaces
The ADM241LJRSZ fits industrial controllers that exchange commands and status over RS-232 without an available ±12 V supply. Its four drivers support four outbound channels, while five receivers support five inbound channels on one 28-SSOP device. The 4.75 V to 5.25 V supply and integrated DC-DC converters simplify cabinet-level power design. Keep the 1 µF charge-pump capacitors close to their pins and route cable-side outputs away from sensitive control circuitry to reduce switching noise.
Recomendado
Laboratory Test Equipment
The ADM241LJRSZ is appropriate for programmable instruments that use a single 5 V logic rail and require several RS-232 channels. Four driver outputs can command separate fixtures, and five receiver inputs can collect status signals without adding multiple interface packages. Its 120 kB/s maximum data rate supports higher-speed control traffic. Place the charge-pump capacitors directly beside the device and maintain a low-impedance ground return to minimize measurement-system interference.
Recomendado
Point-of-Sale Terminals
A POS terminal can use the ADM241LJRSZ to connect a compact controller to peripherals that retain legacy RS-232 interfaces. Four transmit channels allow separate command links to printers, scanners, or display equipment, while five receive channels provide additional status inputs. The integrated converters eliminate a negative supply rail, helping reduce board complexity. Confirm the peripheral voltage levels and pin mapping before installation, and place protection close to the external connector.
Recomendado
Medical Instrumentation
The ADM241LJRSZ can support service and control ports on medical instruments that require multiple RS-232 links but operate from a 5 V supply. Four driver channels and five receiver channels provide flexible point-to-point connectivity within one device, while the full-duplex architecture allows simultaneous command and response traffic. Compliance with a specific medical standard is not implied by the interface function, so system-level isolation, protection, and validation remain necessary.
Recomendado
Embedded Data Acquisition
The ADM241LJRSZ is suitable for embedded data-acquisition units that must distribute commands and collect asynchronous status signals from several RS-232 instruments. Its 120 kB/s capability accommodates instrument-control traffic, while the integrated DC-DC converters permit operation from one 5 V rail. The five receiver inputs can consolidate several sensor-controller links. Validate signal timing at the selected baud rate and use the recommended grounding scheme to prevent converter noise from entering analog measurement channels.
Recomendado
Security and Access Systems
The ADM241LJRSZ can connect access-control panels and peripheral equipment using several legacy RS-232 channels. Four outputs support independent commands, while five inputs can monitor lock, alarm, and configuration status devices. Running from a single 5 V supply simplifies integration into compact control boards. RS-232 is not a secure network interface, so authentication and encryption require separate system measures. External surge and ESD protection should be selected for the installation environment.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ADM241LJRSZ — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ADM241LARSZ-REEL |
|---|---|---|
| Package | 28-SSOP | 28-SSOP |
| Brand | Analog Devices | Analog Devices |
| Operating Temperature Range | 0 °C to 70 °C | -40 °C to 85 °C |
Principais diferenciais
- Provides more receive channels than driver channels (vs ADM241LARSZ-REEL)
- Eliminates the need for a negative supply rail (vs ADM241LARSZ-REEL)
- Supports multiple full-duplex RS-232 links (vs MAX3221EIPWR)
Notas de projeto
Place the specified 1 µF charge-pump capacitors as close as possible to their associated ADM241LJRSZ pins, using short traces and a low-impedance ground plane. The integrated DC-DC converter depends on low-inductance capacitor connections for predictable operation. Follow the manufacturer datasheet’s capacitor values and placement exactly; otherwise output ripple and radiated emissions can increase.
Keep the 5 V supply and ground connections short, with local bypass capacitance placed at the transceiver. Route the four RS-232 driver outputs directly toward their connectors and away from clock, sensor, and analog inputs. Because the ADM241LJRSZ produces approximately ±9 V from onboard converters, separation between charge-pump circuitry and sensitive signal paths improves system-level signal integrity.
Do not treat every RS-232 transceiver as interchangeable merely because it uses the same connector. Before replacing ADM241LJRSZ, verify the 28-SSOP land pattern, all 28 pin assignments, driver and receiver counts, logic thresholds, disable or enable behavior, and supply requirements. ADM241LARSZ-REEL is the identified same-family candidate, but its operating-temperature specification differs and must be acceptable for the deployment.
Informações de conformidade
The manufacturer listing identifies the ADM241LJRSZ as lead free. RoHS, REACH, halogen-free, and conflict-minerals status are not stated and remain unknown.