Analog Devices

ADM241LJRSZ - 4/5 RS-232 5V 120kB/s | Analog Devices

部品番号: ADM241LJRSZ ✓ 生産中
4.75 V to 5.25 V Vdss 28-SSOP, 0.209 mm to 5.30 mm width Package
MOQ: 1 |

ADM241LJRSZ 概要

Analog Devices ADM241LJRSZ is a four-driver, five-receiver full-duplex RS-232 interface transceiver operating from a single 5 V supply at up to 120 kB/s. The device is packaged in a 28-pin SSOP and includes onboard DC-DC converters that produce approximately ±9 V output swing without requiring external ±12 V rails. It is designed for EIA-232-E and V.28 communications interfaces.

A full-duplex RS-232 transceiver is an interface IC that converts logic-level signals into RS-232-compatible line levels and converts incoming RS-232 signals back into CMOS-compatible digital levels. The ADM2xx family belongs to the broader line-driver/receiver and interface-IC hierarchy, making it useful where equipment communicates over short point-to-point serial links without a separate negative supply.

Key features include four RS-232 drivers, five RS-232 receivers, a single 5 V power supply, and a maximum data rate of 120 kB/s. Onboard DC-DC conversion supports approximately ±9 V output swing, while small 1 µF charge-pump capacitors help reduce the external component count. The architecture is intended to meet EIA-232-E and V.28 interface requirements in industrial, instrumentation, data-acquisition, and embedded-control systems.

The integrated charge-pump circuitry allows the transceiver to operate from one 5 V rail rather than conventional ±12 V or ±15 V supplies. This simplifies system power architecture, but the DC-DC converter and driver outputs introduce switching-related considerations around board layout and cable routing. Input and output pins must also be checked against the 4.75 V to 5.25 V supply specification before connecting external logic.

Typical uses include industrial control links, laboratory test equipment, POS terminals, medical-instrument interfaces, and embedded systems that exchange RS-232 commands or status data. The four-driver and five-receiver arrangement supports multiple transmit and receive channels in one package, which can reduce board area when several point-to-point RS-232 links terminate on the same controller.

PCB layout should keep the 1 µF charge-pump capacitors close to their associated pins, provide a low-impedance 5 V supply connection, and route the RS-232 traces away from sensitive analog and clock signals. Because the transceiver includes a DC-DC converter, use the manufacturer’s recommended grounding and bypass-capacitor arrangement to minimize conducted and radiated emissions.

This product page combines the ADM241L family electrical characteristics, 28-SSOP footprint information, package temperature distinctions, and application-oriented design guidance to support faster component selection and PCB implementation.

ドロップイン代替品: ADM241LJRSZ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

ADM241LARSZ-REEL

✅ ドロップイン
📦 28-SSOP
Operating-temperature range is -40 °C to 85 °C versus 0 °C to 70 °C for ADM241LJRSZ, providing 40 °C more cold margin and 15 °C more hot margin

📋 参考代替品(カタログ未掲載)

ADM241LJRSZ 仕様

Number of Drivers 4
Number of Receivers 5
Transceiver Type Full RS-232
Supply Voltage Range 4.75 V to 5.25 V
データレート 120 kB/s
RS-232 Output Swing ±9 V
Charge-Pump Capacitor Value 1 µF
Protocol RS-232
Interface Standard EIA-232-E and V.28
パッケージ 28-SSOP, 0.209 mm to 5.30 mm width
実装タイプ Surface mount
動作温度範囲 0 °C to 70 °C
Internal DC-DC Converter Yes, onboard
Power Supply Count 1 x 5 V
Lead-Free Status Lead free

ADM241LJRSZ 28-ssop, 0.209 mm to 5.30 mm width ピン配置ガイド

ADM241LJRSZ (28-ssop, 0.209 mm to 5.30 mm width パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

ADM241LJRSZ の 28-ssop, 0.209 mm to 5.30 mm width パッケージピン配置図

詳細なピン配置データはありません: ADM241LJRSZ.

詳細は データシート をご参照ください。

主な用途

ADM241LJRSZ の用途: 6 件s: Industrial Control Interfaces, Laboratory Test Equipment, Point-of-Sale Terminals, Medical Instrumentation, Embedded Data Acquisition, Security and Access Systems.

🏭

Industrial Control Interfaces

The ADM241LJRSZ fits industrial controllers that exchange commands and status over RS-232 without an available ±12 V supply. Its four drivers support four outbound channels, while five receivers support five inbound channels on one 28-SSOP device. The 4.75 V to 5.25 V supply and integrated DC-DC converters simplify cabinet-level power design. Keep the 1 µF charge-pump capacitors close to their pins and route cable-side outputs away from sensitive control circuitry to reduce switching noise.

🔧

Laboratory Test Equipment

The ADM241LJRSZ is appropriate for programmable instruments that use a single 5 V logic rail and require several RS-232 channels. Four driver outputs can command separate fixtures, and five receiver inputs can collect status signals without adding multiple interface packages. Its 120 kB/s maximum data rate supports higher-speed control traffic. Place the charge-pump capacitors directly beside the device and maintain a low-impedance ground return to minimize measurement-system interference.

🖥️

Point-of-Sale Terminals

A POS terminal can use the ADM241LJRSZ to connect a compact controller to peripherals that retain legacy RS-232 interfaces. Four transmit channels allow separate command links to printers, scanners, or display equipment, while five receive channels provide additional status inputs. The integrated converters eliminate a negative supply rail, helping reduce board complexity. Confirm the peripheral voltage levels and pin mapping before installation, and place protection close to the external connector.

💊

Medical Instrumentation

The ADM241LJRSZ can support service and control ports on medical instruments that require multiple RS-232 links but operate from a 5 V supply. Four driver channels and five receiver channels provide flexible point-to-point connectivity within one device, while the full-duplex architecture allows simultaneous command and response traffic. Compliance with a specific medical standard is not implied by the interface function, so system-level isolation, protection, and validation remain necessary.

📡

Embedded Data Acquisition

The ADM241LJRSZ is suitable for embedded data-acquisition units that must distribute commands and collect asynchronous status signals from several RS-232 instruments. Its 120 kB/s capability accommodates instrument-control traffic, while the integrated DC-DC converters permit operation from one 5 V rail. The five receiver inputs can consolidate several sensor-controller links. Validate signal timing at the selected baud rate and use the recommended grounding scheme to prevent converter noise from entering analog measurement channels.

🔒

Security and Access Systems

The ADM241LJRSZ can connect access-control panels and peripheral equipment using several legacy RS-232 channels. Four outputs support independent commands, while five inputs can monitor lock, alarm, and configuration status devices. Running from a single 5 V supply simplifies integration into compact control boards. RS-232 is not a secure network interface, so authentication and encryption require separate system measures. External surge and ESD protection should be selected for the installation environment.

What is the ADM241LJRSZ?
The ADM241LJRSZ is a four-driver, five-receiver, full-duplex RS-232 transceiver from Analog Devices. According to the manufacturer’s ADM241L product information, it operates from one 5 V supply, supports data rates up to 120 kB/s, and uses onboard DC-DC converters to produce approximately ±9 V RS-232 output swing. It is packaged in a 28-pin SSOP.
What is the operating voltage of ADM241LJRSZ?
The ADM241LJRSZ operates from a 4.75 V to 5.25 V supply. The manufacturer specifies a single 5 V power rail, allowing the interface to generate the positive and negative RS-232 levels needed by EIA-232-E and V.28 systems. The supply range should be checked at every board voltage, including tolerance, ripple, and startup conditions.
How many RS-232 drivers and receivers does ADM241LJRSZ have?
The ADM241LJRSZ contains four RS-232 drivers and five RS-232 receivers. This arrangement supports four outbound channels and five inbound channels in one full-duplex interface device. The driver and receiver counts are important when allocating UART signals because each transmitter and receiver channel requires its own corresponding logic-side connection.
What is the maximum data rate of ADM241LJRSZ?
The maximum supported data rate is 120 kB/s. According to the Analog Devices ADM241L product information, the device is intended for EIA-232-E and V.28 communications interfaces and can operate up to 120 kB/s. Cable length, rise and fall times, loading, and the connected UART must also support the selected signaling rate.
Does ADM241LJRSZ need external ±12 V power?
No. The ADM241LJRSZ requires only a single 5 V supply because its onboard DC-DC converters generate the bipolar voltage used by the RS-232 drivers. The resulting output swing is approximately ±9 V. This avoids a separate negative supply, but correct charge-pump capacitor placement and grounding remain essential for clean operation.
Where can I download the ADM241LJRSZ datasheet PDF?
The official ADM241L datasheet is available through Analog Devices’ ADM241L product page at https://www.analog.com/en/products/adm241l.html. The document contains the electrical characteristics, RS-232 driver and receiver specifications, charge-pump capacitor requirements, pin description, and recommended application information for the 28-SSOP device.
Where can I find the ADM241LJRSZ pinout?
The ADM241LJRSZ pin configuration is documented in the pin-description table of the Analog Devices ADM241L manufacturer datasheet. Use that table when assigning driver inputs, receiver outputs, supply pins, ground pins, and charge-pump capacitor connections. The component uses a 28-pin SSOP, so its footprint and land pattern must match that package.
What capacitors does ADM241LJRSZ require?
The ADM241L family operates with small 1 µF charge-pump capacitors, as stated in the manufacturer’s product information. These capacitors must be connected exactly as shown in the ADM241L datasheet because their placement affects the DC-DC converter’s switching behavior and the resulting RS-232 output quality. Use capacitor types with suitable DC-bias and temperature characteristics.
Can ADM241LJRSZ be used with a 3.3 V microcontroller?
The ADM241LJRSZ itself requires a 4.75 V to 5.25 V supply, so a 3.3 V system must provide the required logic levels at its driver and receiver interfaces. The manufacturer datasheet should be used to confirm input thresholds and output logic levels before connecting a 3.3 V controller. If those levels are unsuitable, a separate level translator is required.
ADM241LJRSZ vs ADM241LARSZ-REEL — which operating temperature should I choose?
Choose ADM241LJRSZ when the required commercial temperature range of 0 °C to 70 °C is adequate. Choose ADM241LARSZ-REEL when the design requires the wider -40 °C to 85 °C range. Their package and core interface family are closely related, but the 75 °C span between their lower temperature limits and 15 °C span between upper limits must match the deployment environment.
When should I choose ADM241LJRSZ over a MAX3221 RS-232 transceiver?
Choose ADM241LJRSZ when the design specifically benefits from its four drivers, five receivers, 28-SSOP footprint, and 120 kB/s capability. A MAX3221E-family device may be preferable when its available channel count, package, temperature grade, shutdown behavior, or channel-to-channel arrangement better matches the PCB. Compare the complete pin map and logic levels before making a substitution.
Is ADM241LJRSZ suitable for industrial control equipment?
The ADM241LJRSZ is suitable for commercial-temperature industrial control equipment operating from 0 °C to 70 °C. Its single 5 V supply and approximately ±9 V RS-232 output make it useful for controller-to-instrument links where ±12 V is unavailable. For wider environmental ranges, select a device explicitly specified for the required temperature range.
What can replace ADM241LJRSZ?
The closest identified same-family option is ADM241LARSZ-REEL, which uses the 28-SSOP interface and expands the temperature range to -40 °C to 85 °C. It can serve as a drop-in candidate when the existing PCB footprint and pin assignments match, but temperature and shutdown behavior should be reviewed before replacement. Submit the exact MPN through the Request a Quote form for current sourcing.
What is the best cross-brand equivalent for ADM241LJRSZ?
No cross-brand drop-in equivalent can be confirmed from the available technical information without an exact 28-SSOP pin comparison. A device with the same RS-232 protocol and supply voltage is not automatically interchangeable, especially when channel count, driver disable logic, receiver enable logic, or charge-pump connections differ. Use the Request a Quote form and provide the required channel counts, data rate, and temperature range.
Where to buy ADM241LJRSZ and what is its price?
Use the Request a Quote form on this page to request ADM241LJRSZ pricing, stock, minimum order quantity, and lead time. The form allows buyers to specify quantities and packaging requirements without relying on stale price tables. For technical confirmation, use the Analog Devices ADM241L product page and manufacturer datasheet linked on this page.

エンジニアリング参考データ: ADM241LJRSZ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose ADM241LJRSZ when a design needs four RS-232 transmit channels, five receive channels, and operation from a single 5 V rail in a commercial-temperature environment. Its onboard converters generate approximately ±9 V output swing, so external ±12 V or ±15 V supplies are unnecessary. Select ADM241LARSZ-REEL instead when the installation can benefit from its wider -40 °C to 85 °C range. Consider a MAX3221E-family device when one transmit and one receive channel are sufficient or when its package and shutdown functions better match the PCB. For any substitution, verify the exact land pattern, every pin assignment, logic thresholds, enable/disable functions, and the manufacturer’s charge-pump capacitor layout. Do not choose solely by protocol or connector type.

代替品との比較

パラメータ この製品 ADM241LARSZ-REEL
Package 28-SSOP 28-SSOP
Brand Analog Devices Analog Devices
Operating Temperature Range 0 °C to 70 °C -40 °C to 85 °C

主な差別化要因

  • Provides more receive channels than driver channels (vs ADM241LARSZ-REEL)
  • Eliminates the need for a negative supply rail (vs ADM241LARSZ-REEL)
  • Supports multiple full-duplex RS-232 links (vs MAX3221EIPWR)

設計ノート

Place the specified 1 µF charge-pump capacitors as close as possible to their associated ADM241LJRSZ pins, using short traces and a low-impedance ground plane. The integrated DC-DC converter depends on low-inductance capacitor connections for predictable operation. Follow the manufacturer datasheet’s capacitor values and placement exactly; otherwise output ripple and radiated emissions can increase.

Keep the 5 V supply and ground connections short, with local bypass capacitance placed at the transceiver. Route the four RS-232 driver outputs directly toward their connectors and away from clock, sensor, and analog inputs. Because the ADM241LJRSZ produces approximately ±9 V from onboard converters, separation between charge-pump circuitry and sensitive signal paths improves system-level signal integrity.

Do not treat every RS-232 transceiver as interchangeable merely because it uses the same connector. Before replacing ADM241LJRSZ, verify the 28-SSOP land pattern, all 28 pin assignments, driver and receiver counts, logic thresholds, disable or enable behavior, and supply requirements. ADM241LARSZ-REEL is the identified same-family candidate, but its operating-temperature specification differs and must be acceptable for the deployment.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Yes
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The manufacturer listing identifies the ADM241LJRSZ as lead free. RoHS, REACH, halogen-free, and conflict-minerals status are not stated and remain unknown.

データ検証日: 2026-11-19 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

ADM241LJRSZ datasheet ADM241LJRSZ pinout ADM241LJRSZ datasheet pdf ADM241LJRSZ specifications ADM241LJRSZ 28-SSOP Analog Devices ADM241LJRSZ ADM241LJRSZ equivalent ADM241LJRSZ replacement ADM241LJRSZ drop-in replacement ADM241LJRSZ vs ADM241LARSZ-REEL ADM241LJRSZ vs MAX3221EIPWR ADM241LJRSZ price ADM241LJRSZ stock ADM241LJRSZ application circuit

関連部品&用語

Analog Devices ADM241LJRSZ ADM241LARSZ-REEL MAX3221EIPWR RS-232 full-duplex transceiver RS-232 driver RS-232 receiver line driver/receiver interface IC semiconductor EIA-232-E V.28 DC-DC converter charge-pump capacitor CMOS logic 28-SSOP SSOP family surface-mount package SMD 120 kB/s 4.75 V to 5.25 V ±9 V output swing 1 µF capacitor
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示