ADRV9003BBCZ-REEL - 30MHz-6GHz RF Transceiver | ADI
N.º da peça: ADRV9003BBCZ-REEL ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $1068.75 | $1.068,75 |
| 10 | $771.875 | $7.718,75 |
| 100 | $682.8125 | $68.281,25 |
| 500 | $653.125 | $326.562,50 |
| 1.000 | $623.4375 | $623.437,50 |
ADRV9003BBCZ-REEL Visão geral
An RF transceiver is a combined transmitter and receiver used in radio systems to convert between baseband digital data and modulated RF signals. In an ADRV9003-class transceiver, integrated synthesizers generate local-oscillator signals, while on-chip DSP performs filtering, gain control, calibration, and data formatting before handoff to an FPGA or SoC. This integration replaces multiple discrete IF/RF components and shortens radio design cycles.
Key features of the ADRV9003BBCZ-REEL include the 30 MHz to 6 GHz operational range, 1T2R channel architecture, high linearity, high dynamic range, integrated synthesizers, and digital signal processing capabilities. According to the ADI product page, the device is optimized for high performance in demanding communications links.
From an architecture perspective, the 1T2R configuration suits TDD systems that need one transmit path and two receive paths, such as base stations with receive diversity or dual-direction monitoring. The integrated DSP offloads many radio functions from the baseband processor, reducing host FPGA resource usage and supporting multiband software-defined radios.
Typical applications include 5G/4G small cells, software-defined radios, phased-array radar feeds, industrial IoT gateways, satellite communications, and test-and-measurement instruments. In these systems, the device's bandwidth and linearity reduce error vector magnitude (EVM) and improve sensitivity.
When designing with the ADRV9003BBCZ-REEL, pay attention to board-level thermal management for the BGA package and clean supply filtering near the RF pins. A well-controlled RF layout with proper impedance matching and grounding is essential to achieve the high dynamic range promised by the datasheet.
Alternativas drop-in para ADRV9003BBCZ-REEL — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com ADRV9003BBCZ-REEL (mesmo formato e footprint) — diferindo em Frequency Range, Interface, Package, Number of Receivers, Number of Transmitters.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
ADRV9003BBCZ
✓ Em estoque
$95 / unidade
Ver ficha técnica →ADRV9002BBCZ
✓ Em estoque
$210 / unidade
Ver ficha técnica →ADRV9004BBCZ
✓ Em estoque
$90 / unidade
Ver ficha técnica →ADRV9001BBCZ
📋 Alternativa de referência (fora do catálogo)
ADRV9003BBCZ-REEL Especificações
| Função | RF Transceiver |
| RF Frequency Range | 30 MHz to 6 GHz |
| RF Type | General ISM > 1 GHz |
| Number of Receivers | Dual-channel |
| Number of Transmitters | Single-channel |
| Integrated Synthesizers | Yes |
| Digital Signal Processing | Yes |
| High Linearity | Yes |
| High Dynamic Range | Yes |
| Antenna | Not Included |
| Tipo de montagem | Surface Mount |
| Status RoHS | Compliant |
| Status do ciclo de vida | Active |
Guia de Configuração de Pinos do ADRV9003BBCZ-REEL standard
Configuração de pinos para ADRV9003BBCZ-REEL (pacote standard). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para ADRV9003BBCZ-REEL.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
ADRV9003BBCZ-REEL é adequado para 6 aplicaçãos: 5G and 4G Small Cell Base Stations, Software-Defined Radio (SDR), Phased-Array Radar and Defense Radio, Industrial IoT and Smart Grid, Test and Measurement Equipment, Aerospace and Satellite Communications.
5G and 4G Small Cell Base Stations
The ADRV9003BBCZ-REEL supports sub-6 GHz 5G NR and LTE small cells with its 30 MHz to 6 GHz tuning range and 1T2R architecture. The dual receive channels enable receive diversity or TDD coexistence monitoring, while the single transmit path reduces power and cost in small-cell form factors. Its high linearity and high dynamic range help maintain low EVM under interference, and integrated DSP reduces host FPGA load. Combined with a companion MxFE or DAC, it forms a complete baseband-to-RF radio chain. Verify channel bandwidth and clock interface against the target 5G NR signal bandwidth before layout.
Recomendado
Software-Defined Radio (SDR)
For software-defined radio platforms, the ADRV9003BBCZ-REEL provides a wide 30 MHz to 6 GHz operating range and on-chip digital signal processing, allowing one hardware design to cover multiple bands and waveforms. The single TX path is ideal for compact SDR transceivers, while dual RX paths support antenna diversity and wideband spectrum monitoring. Its high dynamic range preserves weak-signal performance in congested spectrum. Pair the transceiver with high-speed converters and an FPGA for a reconfigurable radio; confirm JESD interface lanes and clocking for your chosen FPGA fabric.
Recomendado
Phased-Array Radar and Defense Radio
The ADRV9003BBCZ-REEL is well suited for phased-array radar and defense radio modules because of its high linearity, high dynamic range, and integrated synthesizers. The dual receive channels support coherent multi-channel arrays when multiple transceivers are synchronized, while the single transmit channel is adequate for many radar and electronic-warfare waveforms. Its wideband 30 MHz to 6 GHz coverage enables multi-band support on a single board. Use careful PLL reference design and array calibration to achieve beamforming accuracy.
Recomendado
Industrial IoT and Smart Grid
In industrial IoT gateways and smart grid radios, the ADRV9003BBCZ-REEL provides a robust, software-defined RF link covering license-free ISM bands and 30 MHz to 6 GHz applications. Its integrated DSP reduces the host processor load, simplifying a highly integrated wireless gateway that can adapt across regional bands. The dual-RX architecture enables diversity reception for improved reliability in fading environments, while the single TX reduces bill-of-materials cost in low-power hub designs. Ensure adequate thermal management in sealed outdoor enclosures.
Recomendado
Test and Measurement Equipment
The ADRV9003BBCZ-REEL is useful in RF signal generators, spectrum analyzers, and wireless testers that must cover 30 MHz to 6 GHz. Its high dynamic range supports accurate signal analysis, and the integrated synthesizers reduce the complexity of swept-frequency designs. A 1T2R configuration allows a signal generator plus two measurement receivers in a single instrument, saving space and cost. When used in T&M equipment, maintain a clean reference clock and calibrate the front-end over temperature for reliable absolute-level accuracy.
Recomendado
Aerospace and Satellite Communications
For aerospace and satellite communication radios, the ADRV9003BBCZ-REEL offers a wide frequency planning range, integrated synthesizers, and high dynamic range in a compact BGA package. The dual receive channels support multiple narrow-band or wideband receive signals, while the single transmitter covers telemetry, command, or data downlink functions. Its digital signal processing offloads modulation, filtering, and calibration tasks from the satellite modem processor. Radiation and reliability performance should be verified against mission requirements before deployment.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ADRV9003BBCZ-REEL — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ADRV9003BBCZ | ADRV9002BBCZ | ADRV9001BBCZ | ADRV9004BBCZ |
|---|---|---|---|---|---|
| Package | BGA-196 (BBCZ) | BGA-196 (BBCZ) - same | BGA-196 (BBCZ) - same | BGA-196 (BBCZ) - assumed same | BGA-196 (BBCZ) - assumed same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Integrated Synthesizers | Yes | Yes | Yes | Yes | Yes |
| Digital Signal Processing | Yes | Yes | Yes | Yes | Yes |
| Packaging / Supply Form | Tape & Reel (-REEL) | Tray | Tray (BBCZ) | Tray (BBCZ) | Tray (BBCZ) |
Principais diferenciais
- 1T2R channel architecture reduces power and cost in receive-diversity systems (vs ADRV9002BBCZ)
- Wide 30 MHz to 6 GHz frequency coverage supports multiband radio platforms (vs ADRV9001BBCZ)
- Single TX plus dual RX fits TDD small cell and diversity architectures (vs ADRV9004BBCZ)
Notas de projeto
Treat the RF paths around the ADRV9003BBCZ-REEL as 50 ohm controlled-impedance microstrip or grounded coplanar lines. Keep the ground return path continuous and place decoupling capacitors very close to each supply pin, especially the RF, PLL, and digital supplies. Use a solid ground plane under the BGA and minimize via stubs in RF nets to preserve high dynamic range.
The BGA package can dissipate significant power when both RX channels and the TX path are active. Provide a thermal via array under the exposed pad, connect them to an internal ground/thermal plane, and ensure the PCB copper area is sufficient for the expected ambient temperature. Keep the junction temperature within datasheet limits under maximum output power and wideband operation.
Do not forget that the ADRV9003BBCZ-REEL is supplied without an antenna, so external matching, filtering, and antenna switching are required. Use a clean low-noise reference clock for the integrated synthesizers and filter all clock and supply lines to avoid spurious emissions. Verify the digital interface standard (e.g. JESD204B/C) and lane configuration before FPGA interface design.
Informações de conformidade
BBCZ suffix implies lead-free/RoHS-compliant Analog Devices product; other compliance certificates were not present in the verified data.
