ADS7825PB - 16-Bit 4-Channel SAR ADC | Texas Instruments
N.º da peça: ADS7825PB ✓ AtivoADS7825PB Visão geral
A sampling ADC is a data-converter category that acquires an analog voltage, samples it with a sample-and-hold circuit, and converts the held voltage into a digital code. The ADS7825PB combines a four-channel analog multiplexer, sample-and-hold amplifier, internal clock, reference circuitry, comparator, and conversion logic in one integrated circuit. It is suitable for systems that require multiple analog inputs to be digitized sequentially while sharing one ADC.
Key features include 16-bit resolution, four multiplexed input channels, parallel or serial data output, ±2.0 LSB maximum integral nonlinearity, and channel-to-channel matching of ±0.1%. The device is also described as pin-compatible with the ADS7824. Its parallel output mode supports microprocessor and DSP interfaces, while the serial interface reduces the number of signal connections required by the controller.
The internal architecture uses a successive-approximation-register conversion process. During each conversion, the internal DAC and comparator successively determine the digital representation of the sampled input. The four-channel multiplexer allows one ADC core to serve several analog sources, reducing board area compared with using four separate converters. The result is a compact solution for instrumentation, process control, and general-purpose data acquisition.
Typical applications include industrial process measurement, laboratory instrumentation, sensor signal acquisition, factory automation, data-logging equipment, and embedded control systems. The ±10 V input capability is especially useful for industrial sensors and control signals that exceed common 0 V to 5 V logic levels. External protection, filtering, and reference components are still required when connecting real-world analog sources.
Designers should account for analog input conditioning, sampling dynamics, reference accuracy, and digital-interface timing. Place input filtering and protection close to the converter pins, maintain the required bypass capacitance, and route parallel output signals away from sensitive analog inputs. The 28-pin PDIP package is suitable for through-hole prototypes and industrial assemblies where a large package is acceptable.
Alternativas drop-in para ADS7825PB — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com ADS7825PB (mesmo formato e footprint) — diferindo em Channel-to-Channel Matching, Integral Nonlinearity, Mounting Type, Package, Supply Voltage.
ADS7825P
✅ Drop-InConsulte o preço
Ver ficha técnica →ADS7825PB Classificações máximas e características elétricas
| Converter Type | Successive-approximation-register sampling ADC |
| Resolução | 16 bit |
| Number of Input Channels | 4 channels |
| Input Configuration | 4 single-ended inputs |
| Taxa de amostragem | 40 kSPS |
| Maximum Sampling and Conversion Time | 25 us |
| Tensão de alimentação | +5 V |
| Power Dissipation | 50 mW maximum |
| Power-Down Current | 50 uW |
| Integral Nonlinearity | ±2.0 LSB maximum |
| Channel-to-Channel Matching | ±0.1% |
| Input Range | ±10 V |
| Data Output | Parallel or serial |
| Encapsulamento | 28-pin PDIP |
| Tipo de montagem | Through-hole PDIP |
Guia de Configuração de Pinos do ADS7825PB 28-pin pdip
Configuração de pinos para ADS7825PB (pacote 28-pin pdip). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para ADS7825PB.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
ADS7825PB é adequado para 6 aplicaçãos: Industrial Process Measurement, Precision Sensor Signal Acquisition, Laboratory Data Acquisition, Factory Automation Control, Data Logging Equipment, Embedded Control Systems.
Industrial Process Measurement
The ADS7825PB is well suited to process-control systems that monitor several analog pressure, level, or flow signals. Its four single-ended channels let one converter service multiple sensor lines, while 16-bit resolution and ±0.1% channel-to-channel matching help preserve measurement consistency. The ±10 V system supports industrial signal conditioning ahead of the ADC. Place protection and anti-alias filtering at each connector, keep the analog ground path compact, and use the manufacturer’s scaling network around the converter. The 40 kSPS rate provides adequate refresh speed for many slowly changing process variables, while the 25 us maximum acquisition-and-conversion time supports deterministic control-loop timing.
Recomendado
Precision Sensor Signal Acquisition
The ADS7825PB can digitize outputs from industrial transducers when the sensor signal is first scaled and filtered into the converter’s supported input arrangement. Sixteen-bit resolution provides dense numerical data for temperature, pressure, position, and force measurements, while four channels allow multiplexing among related sensors. The 40 kSPS throughput is more than adequate for common slow-changing industrial sensors and avoids unnecessary conversion overhead. High-impedance sources may require buffering so the sample-and-hold input settles accurately. Apply the manufacturer’s acquisition recommendations, route analog inputs away from switching-clock and digital-output nets, and calibrate offset and gain after the complete signal chain is assembled.
Recomendado
Laboratory Data Acquisition
For laboratory instrumentation, the ADS7825PB combines four analog inputs, 16-bit resolution, and flexible parallel or serial output in one converter. Parallel output can connect efficiently to a DSP or microprocessor data bus, while serial output simplifies wiring where pin count is constrained. Its 25 us maximum conversion time and 40 kSPS rate fit measurements that do not require high-rate waveform acquisition. A precision reference and carefully scaled front end are essential when laboratory accuracy is the priority. Validate the complete measurement chain against a known source, including reference stability, connector behavior, grounding, and input settling, rather than relying only on the converter’s nominal resolution.
Recomendado
Factory Automation Control
The ADS7825PB fits factory automation modules that monitor analog actuator feedback, equipment condition, or process-control inputs. Four channels reduce the number of separate converters required when several sensors share a controller. The single +5 V supply and 50 mW maximum power dissipation simplify power budgeting in compact control electronics. Choose the serial interface when the controller has limited parallel I/O capacity, or use parallel mode when deterministic bus reads are preferred. Add input clamps for industrial transients, use isolated boundaries where required by the installation, and keep switching regulators and high-current digital returns from coupling into the analog reference and signal nodes.
Recomendado
Data Logging Equipment
The ADS7825PB is appropriate for compact data loggers that sample multiple slowly changing physical variables. Its four-channel multiplexer provides channel selection without four separate converter packages, and its 16-bit output preserves detail across the selected analog range. Serial communication can reduce connection count to a microcontroller or embedded processor, while parallel output may shorten transfer time on a controller with a dedicated data bus. Reference stability and front-end scaling determine the practical accuracy of logged records. Use calibrated input networks, record calibration coefficients, and verify timing if channels are switched dynamically under changing source impedances.
Recomendado
Embedded Control Systems
The ADS7825PB can serve as the measurement front end in an embedded controller requiring four analog inputs but only moderate conversion speed. The processor can select a channel, initiate conversion, and receive the result through either the parallel or serial interface. The 50 mW maximum dissipation and 50 uW power-down power make the device suitable for power-managed acquisition blocks. Ensure the selected interface timing matches the controller’s I/O characteristics and that the chip-select and conversion-control sequence matches the datasheet. Maintain separate analog and digital return paths, bypass the supply near the device, and avoid routing clock edges beneath sensitive input or reference connections.
Recomendado
Dados de referência de engenharia para ADS7825PB — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ADS7825P |
|---|---|---|
| Package | 28-pin PDIP | 28-pin PDIP - same |
| Brand | Texas Instruments | Texas Instruments |
| Resolution | 16 bit | 16 bit |
| Input Channels | 4 single-ended inputs | 4 inputs |
| Sampling Rate | 40 kSPS | 40 kSPS |
| Conversion Time | 25 us maximum | 25 us maximum |
| Supply Voltage | +5 V | +5 V |
| Maximum Power Dissipation | 50 mW | 50 mW |
| Integral Nonlinearity | ±2.0 LSB maximum | ±2.0 LSB maximum |
| Data Interface | Parallel or serial | Parallel or serial |
Principais diferenciais
- Combines four analog inputs with 16-bit conversion in one converter (vs ADS7825P)
- Supports both parallel and serial microprocessor data outputs (vs ADS7825P)
- Designed for deterministic medium-speed acquisition (vs ADS7825P)
Notas de projeto
Route analog input, reference, and ground paths away from the converter clock and digital outputs. Use a continuous analog ground region where practical, connect the device ground pins according to the manufacturer layout example, and place input filtering capacitors close to the relevant pins. The 16-bit resolution can reveal board-level leakage, contamination, and ground-current errors that are negligible at lower resolutions.
Do not treat the 40 kSPS rate as a guarantee that every source can be sampled at that rate. The acquisition time depends on input impedance, source settling, reference behavior, and the external input network. Confirm that the source impedance and filter capacitor meet the datasheet acquisition requirements, especially when switching from a high-impedance sensor channel to another input.
Use the specified single +5 V supply and place the required bypass capacitor close to the supply pins. Keep analog and digital return currents separated until their controlled connection point to reduce reference and input disturbances. If the converter shares a board with switching regulators, route the regulator output directly to the bypass network and keep its high-current return path away from the ADC ground pin.
Protect the ±10 V input path against transients and accidental overvoltage. The external scaling network defines the usable signal range and must match the recommended topology. Verify converter sequencing, input impedance, and reference settling before enabling acquisition so that an out-of-range or unsettled signal cannot corrupt adjacent channel measurements.
Informações de conformidade
The available manufacturer information establishes the converter functionality but does not state the requested compliance attributes for the exact ADS7825PB ordering code.