ADSP-2104BPZ-80 - 16-Bit 20MHz DSP | Analog Devices
N.º da peça: ADSP-2104BPZ-80 ✗ Fim de vidaADSP-2104BPZ-80 Visão geral
A digital signal processor, commonly called a DSP, is a semiconductor optimized to execute repetitive arithmetic operations on sampled signals. A DSP belongs to the microprocessor and embedded-processing hierarchy, where dedicated datapaths and parallel internal buses increase throughput for filtering, signal analysis, modulation, and control algorithms. The ADSP-2104 architecture uses an instruction bus and two data buses, supporting three-bus performance while maintaining a fixed-point computational model.
The ADSP-2104BPZ-80 operates from a 5 V supply and is identified as a 16-bit fixed-point processor capable of 20 MIPS. Its listed on-chip RAM capacity is 1.5 kB, while non-volatile memory is external. The processor includes a synchronous serial port interface and a programmable timer. These resources make it applicable to communications, industrial control, audio processing, instrumentation, and embedded signal analysis systems where deterministic arithmetic and compact dedicated processing are valuable.
The enhanced Harvard architecture separates instruction flow from data movement, allowing computational units, address generators, and the program sequencer to work concurrently. Two data buses can support independent data transfers while the instruction bus fetches the next operation. This organization is particularly effective for fixed-point algorithms that combine multiply-accumulate work with sequential memory access, although actual application performance still depends on code structure, memory access, clock configuration, and external interface timing.
The -80 grade is associated with an operating temperature range of -40 °C to +85 °C. Its PLCC package provides 68 J-lead connections and a 24.23 mm by 24.23 mm body. Tube packaging is listed for this ordering configuration. Because the package library does not contain a corresponding 68-pin PLCC drawing, engineers should use the Analog Devices package drawing and pin-description table when assigning PCB land patterns and signal connections.
Before committing a board layout, verify clock requirements, serial-port configuration, memory interfaces, reset behavior, and supply sequencing against the manufacturer datasheet. The 5 V operating requirement also calls for stable rail design with local bypass capacitance placed close to the supply pins. This page combines the manufacturer product information with practical engineering guidance, application analysis, and verified sourcing links to support component selection and board planning.
Alternativas drop-in para ADSP-2104BPZ-80 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
ADSP-2104BPZ-60
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
ADSP-2104BPZ-100
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
ADSP-2104BPZ-120
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
ADSP-2104BPZ-80 Especificações
| Product Type | Fixed-point digital signal processor (DSP) |
| Processor Word Length | 16 bit |
| Clock Frequency | 20 MHz |
| Processing Rate | 20 MIPS |
| Tensão de alimentação | 5 V |
| I/O Voltage | 5 V |
| Faixa de temperatura de operação | -40 °C to +85 °C |
| On-Chip RAM | 1.5 kB |
| Non-Volatile Memory | External |
| Architecture | Enhanced Harvard architecture with three-bus performance |
| Internal Buses | 1 instruction bus and 2 data buses |
| Serial Interface | Synchronous Serial Port (SSP) |
| Timer | Programmable timer |
| Encapsulamento | 68-pin PLCC, J-lead, 24.23 mm × 24.23 mm |
| Tipo de montagem | Surface mount |
| Packaging | Tube |
Guia de Configuração de Pinos do ADSP-2104BPZ-80 68-pin plcc, j-lead, 24.23 mm × 24.23 mm
Configuração de pinos para ADSP-2104BPZ-80 (pacote 68-pin plcc, j-lead, 24.23 mm × 24.23 mm). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para ADSP-2104BPZ-80.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
ADSP-2104BPZ-80 é adequado para 6 aplicaçãos: Industrial Control and Signal Conditioning, Communications Modulation and Filtering, Audio and Speech Processing, Measurement and Instrumentation, Legacy Equipment Repair and Replacement, Motor and Motion Control.
Industrial Control and Signal Conditioning
The ADSP-2104BPZ-80 fits embedded control systems that repeatedly process sampled sensor data using fixed-point arithmetic. Its 20 MHz clock and 20 MIPS execution capability provide dedicated numerical throughput, while the enhanced Harvard architecture separates instruction fetches from two data-transfer paths. In a control loop, the processor can execute filtering, scaling, and compensation routines while communicating with external converters through the synchronous serial port. The 5 V supply and -40 °C to +85 °C operating range support industrial equipment, but the external memory arrangement should be checked carefully against the system architecture.
Recomendado
Communications Modulation and Filtering
The ADSP-2104BPZ-80 can support legacy communication subsystems requiring deterministic fixed-point filtering, modulation, or demodulation. Its 16-bit datapath and dedicated computation resources are suitable for algorithms that benefit from repeated multiply-accumulate operations, while the two data buses support concurrent instruction and data movement. A serial link can connect the DSP to a transceiver or codec. Designers should account for external non-volatile memory, synchronize serial-port timing to the source data, and verify that the legacy processor and its firmware fit the product's lifecycle and certification plan.
Recomendado
Audio and Speech Processing
The ADSP-2104BPZ-80 is appropriate for compact audio products built around established fixed-point signal-processing code, including filtering, mixing, or sample-rate conversion. Its dedicated DSP architecture avoids relying on a general-purpose processor for repetitive numeric operations, and the 20 MIPS rate provides a defined processing budget for sample processing. The synchronous serial port can interface with an audio converter. Adequacy must be evaluated using the actual sampling rate, filter order, memory access pattern, and system delay; the available on-chip RAM is 1.5 kB, so larger buffers require external memory support.
Recomendado
Measurement and Instrumentation
The ADSP-2104BPZ-80 can serve as the processing engine in measurement equipment that acquires samples and performs numerical conditioning in real time. The processor's fixed-point architecture is useful for scaling, digital filtering, calibration tables, and compensation routines, while its programmable timer supports deterministic acquisition tasks. The listed synchronous serial port can communicate with converters, and the 68-pin PLCC package provides a defined legacy footprint. For precision instrumentation, verify converter resolution, sampling latency, dynamic-range requirements, clock jitter sensitivity, and the availability of controlled test equipment before beginning implementation.
Recomendado
Legacy Equipment Repair and Replacement
The ADSP-2104BPZ-80 is especially relevant to repairing or extending industrial, communications, or medical equipment that already uses its 68-pin PLCC implementation. Maintaining the original processor can preserve validated algorithms, timing behavior, peripheral assignments, and regulatory history. The specified -40 °C to +85 °C range supports many industrial environments, while the 5 V operating and I/O levels define the surrounding rail requirements. Before ordering, verify the pinout, grade suffix, package dimensions, tube packaging, and traceability needs, then plan a controlled validation of clock, reset, serial communication, and algorithm outputs.
Recomendado
Motor and Motion Control
The ADSP-2104BPZ-80 can support motion-control subsystems that combine sampled feedback with fixed-point compensation and control calculations. The dedicated arithmetic datapath and 20 MIPS processing rate allow control and signal-processing functions to be consolidated in a compact legacy platform. The processor's programmable timer can organize periodic control tasks, while serial communication can connect position or current feedback. A practical design must bound loop latency, allocate external memory carefully, and coordinate the DSP clock with converters and actuators. The 5 V supply architecture should also include appropriate bypass and power-quality measures.
Recomendado
Dados de referência de engenharia para ADSP-2104BPZ-80 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto |
|---|---|
| Package | 68-pin PLCC (J-lead), 24.23 mm × 24.23 mm |
| Brand | Analog Devices |
| Product Type | Fixed-point digital signal processor |
| Word Length | 16 bit |
| Clock Frequency | 20 MHz |
| Processing Rate | 20 MIPS |
| Supply Voltage | 5 V |
| On-Chip RAM | 1.5 kB |
| Operating Temperature | -40 °C to +85 °C |
| Architecture | Enhanced Harvard architecture with three-bus performance |
Principais diferenciais
- Dedicated 16-bit fixed-point processing (vs ADSP-2109)
- Defined legacy package configuration (vs ADSP-2109)
- Enhanced three-bus signal-processing architecture (vs General-purpose 8/16-bit microcontroller alternatives)
Notas de projeto
Use the ADSP-2104 manufacturer package drawing and pin-description table to establish the 68-pin PLCC land pattern; do not substitute a generic 68-pin PLCC footprint from memory. Confirm lead pitch, body size, pin numbering, orientation, and any thermal or exposed features. Keep clock, reset, and serial-port routing away from sensitive analog inputs, and place supply bypass components adjacent to the relevant pins with short, low-inductance connections.
Design the 5 V rail for both the processor and its external logic interface. Place local high-frequency bypass capacitance close to the supply and ground pins, and provide bulk capacitance at the board's power-distribution entry point. Confirm startup current, clock frequency, external-memory loading, and serial-port activity against the manufacturer limits before selecting regulators and magnetics. No regulator or capacitor values should be chosen without the complete worst-case load and sequencing requirements.
Treat clock and serial-interface routing as timing-critical nets. Use a short, continuous clock path, provide a controlled return path, and avoid routing the clock adjacent to switching or high-current outputs. Confirm serial-port input and output timing against the connected converter or transceiver. If external memory is used, apply the processor's bus timing and layout requirements exactly rather than relying only on the generic enhanced Harvard architecture description.
A common mistake is treating the ADSP-2104 and ADSP-2109 family's shared DSP core as proof of pin compatibility. Common architecture does not guarantee identical on-chip memory, peripheral configuration, package assignments, or external bus behavior. Validate reset behavior, interrupt vectors, serial-port timing, memory sizing, and clock requirements against the specific device datasheet. For legacy production, also document the grade suffix and inspect incoming devices for storage, marking, and package consistency.
Informações de conformidade
The manufacturer product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for this ordering code. AEC-Q100 qualification is not applicable to the identified industrial-temperature processor.