Analog Devices

ADSP-2104BPZ-80 - 16-Bit 20MHz DSP | Analog Devices

MPN: ADSP-2104BPZ-80 ✗ Cuối đời
5 V Vdss 68-pin PLCC, J-lead, 24.23 mm × 24.23 mm Package 20 MHz Speed External Memory
MOQ: 1 |

ADSP-2104BPZ-80 Tóm tắt

Analog Devices ADSP-2104BPZ-80 is a 16-bit fixed-point digital signal processor with a 20 MHz clock, 20 MIPS processing capability, and a 68-pin PLCC package measuring 24.23 mm by 24.23 mm. It is designed for high-speed numeric processing in embedded signal-processing systems, combining an enhanced Harvard architecture, computation units, data address generators, a program sequencer, on-chip RAM, a programmable timer, and serial interfaces.

A digital signal processor, commonly called a DSP, is a semiconductor optimized to execute repetitive arithmetic operations on sampled signals. A DSP belongs to the microprocessor and embedded-processing hierarchy, where dedicated datapaths and parallel internal buses increase throughput for filtering, signal analysis, modulation, and control algorithms. The ADSP-2104 architecture uses an instruction bus and two data buses, supporting three-bus performance while maintaining a fixed-point computational model.

The ADSP-2104BPZ-80 operates from a 5 V supply and is identified as a 16-bit fixed-point processor capable of 20 MIPS. Its listed on-chip RAM capacity is 1.5 kB, while non-volatile memory is external. The processor includes a synchronous serial port interface and a programmable timer. These resources make it applicable to communications, industrial control, audio processing, instrumentation, and embedded signal analysis systems where deterministic arithmetic and compact dedicated processing are valuable.

The enhanced Harvard architecture separates instruction flow from data movement, allowing computational units, address generators, and the program sequencer to work concurrently. Two data buses can support independent data transfers while the instruction bus fetches the next operation. This organization is particularly effective for fixed-point algorithms that combine multiply-accumulate work with sequential memory access, although actual application performance still depends on code structure, memory access, clock configuration, and external interface timing.

The -80 grade is associated with an operating temperature range of -40 °C to +85 °C. Its PLCC package provides 68 J-lead connections and a 24.23 mm by 24.23 mm body. Tube packaging is listed for this ordering configuration. Because the package library does not contain a corresponding 68-pin PLCC drawing, engineers should use the Analog Devices package drawing and pin-description table when assigning PCB land patterns and signal connections.

Before committing a board layout, verify clock requirements, serial-port configuration, memory interfaces, reset behavior, and supply sequencing against the manufacturer datasheet. The 5 V operating requirement also calls for stable rail design with local bypass capacitance placed close to the supply pins. This page combines the manufacturer product information with practical engineering guidance, application analysis, and verified sourcing links to support component selection and board planning.

Bộ thay thế dễ dàng lắp đặt cho ADSP-2104BPZ-80 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

ADSP-2104BPZ-60

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 68-PLCC (J-Lead)
Lower speed grade than the 20 MHz and 20 MIPS ADSP-2104BPZ-80; same BPZ package and ADSP-2104 family architecture.

📋 Tham chiếu thay thế (không có trong danh mục)

ADSP-2104BPZ-100

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 68-PLCC (J-Lead)
Higher speed grade than the 20 MHz and 20 MIPS ADSP-2104BPZ-80; same BPZ package and ADSP-2104 family architecture.

📋 Tham chiếu thay thế (không có trong danh mục)

ADSP-2104BPZ-120

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 68-PLCC (J-Lead)
Higher speed grade than the 20 MHz and 20 MIPS ADSP-2104BPZ-80; same BPZ package and ADSP-2104 family architecture.

📋 Tham chiếu thay thế (không có trong danh mục)

ADSP-2104BPZ-80 Thông số kỹ thuật

Product Type Fixed-point digital signal processor (DSP)
Processor Word Length 16 bit
Clock Frequency 20 MHz
Processing Rate 20 MIPS
Điện áp cung cấp 5 V
I/O Voltage 5 V
Khoảng nhiệt độ hoạt động -40 °C to +85 °C
On-Chip RAM 1.5 kB
Non-Volatile Memory External
Architecture Enhanced Harvard architecture with three-bus performance
Internal Buses 1 instruction bus and 2 data buses
Serial Interface Synchronous Serial Port (SSP)
Timer Programmable timer
Hộp 68-pin PLCC, J-lead, 24.23 mm × 24.23 mm
Kiểu lắp đặt Surface mount
Packaging Tube

Hướng dẫn cấu hình chân ADSP-2104BPZ-80 68-pin plcc, j-lead, 24.23 mm × 24.23 mm

Cấu hình chân cho ADSP-2104BPZ-80 (68-pin plcc, j-lead, 24.23 mm × 24.23 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 68-pin plcc, j-lead, 24.23 mm × 24.23 mm cho ADSP-2104BPZ-80

Không có dữ liệu chân cụ thể sẵn có cho ADSP-2104BPZ-80.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ADSP-2104BPZ-80 phù hợp cho 6 Áp dụngs: Industrial Control and Signal Conditioning, Communications Modulation and Filtering, Audio and Speech Processing, Measurement and Instrumentation, Legacy Equipment Repair and Replacement, Motor and Motion Control.

🏭

Industrial Control and Signal Conditioning

The ADSP-2104BPZ-80 fits embedded control systems that repeatedly process sampled sensor data using fixed-point arithmetic. Its 20 MHz clock and 20 MIPS execution capability provide dedicated numerical throughput, while the enhanced Harvard architecture separates instruction fetches from two data-transfer paths. In a control loop, the processor can execute filtering, scaling, and compensation routines while communicating with external converters through the synchronous serial port. The 5 V supply and -40 °C to +85 °C operating range support industrial equipment, but the external memory arrangement should be checked carefully against the system architecture.

🌐

Communications Modulation and Filtering

The ADSP-2104BPZ-80 can support legacy communication subsystems requiring deterministic fixed-point filtering, modulation, or demodulation. Its 16-bit datapath and dedicated computation resources are suitable for algorithms that benefit from repeated multiply-accumulate operations, while the two data buses support concurrent instruction and data movement. A serial link can connect the DSP to a transceiver or codec. Designers should account for external non-volatile memory, synchronize serial-port timing to the source data, and verify that the legacy processor and its firmware fit the product's lifecycle and certification plan.

🎧

Audio and Speech Processing

The ADSP-2104BPZ-80 is appropriate for compact audio products built around established fixed-point signal-processing code, including filtering, mixing, or sample-rate conversion. Its dedicated DSP architecture avoids relying on a general-purpose processor for repetitive numeric operations, and the 20 MIPS rate provides a defined processing budget for sample processing. The synchronous serial port can interface with an audio converter. Adequacy must be evaluated using the actual sampling rate, filter order, memory access pattern, and system delay; the available on-chip RAM is 1.5 kB, so larger buffers require external memory support.

🔧

Measurement and Instrumentation

The ADSP-2104BPZ-80 can serve as the processing engine in measurement equipment that acquires samples and performs numerical conditioning in real time. The processor's fixed-point architecture is useful for scaling, digital filtering, calibration tables, and compensation routines, while its programmable timer supports deterministic acquisition tasks. The listed synchronous serial port can communicate with converters, and the 68-pin PLCC package provides a defined legacy footprint. For precision instrumentation, verify converter resolution, sampling latency, dynamic-range requirements, clock jitter sensitivity, and the availability of controlled test equipment before beginning implementation.

🖥️

Legacy Equipment Repair and Replacement

The ADSP-2104BPZ-80 is especially relevant to repairing or extending industrial, communications, or medical equipment that already uses its 68-pin PLCC implementation. Maintaining the original processor can preserve validated algorithms, timing behavior, peripheral assignments, and regulatory history. The specified -40 °C to +85 °C range supports many industrial environments, while the 5 V operating and I/O levels define the surrounding rail requirements. Before ordering, verify the pinout, grade suffix, package dimensions, tube packaging, and traceability needs, then plan a controlled validation of clock, reset, serial communication, and algorithm outputs.

⚡

Motor and Motion Control

The ADSP-2104BPZ-80 can support motion-control subsystems that combine sampled feedback with fixed-point compensation and control calculations. The dedicated arithmetic datapath and 20 MIPS processing rate allow control and signal-processing functions to be consolidated in a compact legacy platform. The processor's programmable timer can organize periodic control tasks, while serial communication can connect position or current feedback. A practical design must bound loop latency, allocate external memory carefully, and coordinate the DSP clock with converters and actuators. The 5 V supply architecture should also include appropriate bypass and power-quality measures.

What is the ADSP-2104BPZ-80?
The ADSP-2104BPZ-80 is an Analog Devices 16-bit fixed-point digital signal processor operating at 20 MHz and capable of 20 MIPS in a 68-pin PLCC package. It combines an enhanced Harvard architecture, an instruction bus, two data buses, 1.5 kB of on-chip RAM, a programmable timer, and a synchronous serial port. The Analog Devices product page identifies the ADSP-2104 family as optimized for digital signal processing and other high-speed numeric applications.
What are the key specifications of ADSP-2104BPZ-80 that engineers should know?
The ADSP-2104BPZ-80 is a 5 V, 16-bit fixed-point DSP with a 20 MHz clock, 20 MIPS processing rate, 1.5 kB of on-chip RAM, and a 68-pin PLCC package. According to the Analog Devices product page, its enhanced Harvard architecture uses one instruction bus and two data buses. The listed operating temperature range is -40 °C to +85 °C, and non-volatile memory is implemented externally rather than inside the processor.
What is the operating voltage of ADSP-2104BPZ-80?
The ADSP-2104BPZ-80 operates from a 5 V supply, including a listed 5 V I/O voltage. Because the processor combines a high-speed clock with a PLCC package, the power rail should be designed for stable regulation and low supply impedance. Place local bypass capacitors close to the device supply pins and verify all supply, ground, clock, and reset connections against the pin-description table in the manufacturer datasheet.
Where can I download the ADSP-2104BPZ-80 datasheet PDF?
The official ADSP-2104BPZ-80 documentation is reached from the Analog Devices ADSP-2104 product page at analog.com/en/products/adsp-2104.html. That page is the appropriate starting point for the manufacturer datasheet, product information, and package documentation. Engineers should also use the manufacturer pin-description table rather than relying on a generic PLCC drawing, because function assignments and board-layout details must follow the specific device documentation.
Where can I find the ADSP-2104BPZ-80 pinout and package drawing?
The ADSP-2104BPZ-80 pinout and package drawing must be taken from the Analog Devices ADSP-2104 manufacturer documentation because the component uses a 68-pin J-lead PLCC. The package is listed as 24.23 mm by 24.23 mm, but pin numbering and electrical assignments are not interchangeable with every 68-pin PLCC. Verify the pin-description table, orientation mark, thermal or exposed features, and recommended land pattern before releasing a PCB layout.
Where can I buy ADSP-2104BPZ-80 online?
The ADSP-2104BPZ-80 can be requested through the Request a Quote form on this page. The form provides a direct route for current availability, minimum order quantity, and shipment scheduling without relying on a static price listing. Because this is an older processor family, confirm lifecycle status, original manufacturer traceability, and package condition before committing it to a new production design.
What is the price of ADSP-2104BPZ-80?
Current ADSP-2104BPZ-80 pricing is handled through the Request a Quote form on this page because market conditions and component availability can change quickly. The request should specify the exact MPN, required quantity, tube-packaging preference, target delivery date, and acceptable traceability documentation. It is also important to confirm whether the intended design is a new production program, an equipment repair, or a laboratory evaluation.
What is the lead time for ADSP-2104BPZ-80?
The current lead time for ADSP-2104BPZ-80 should be obtained through the Request a Quote form on this page. Lead time depends on available factory inventory, authorized-distributor stock, packaging configuration, traceability requirements, and the requested shipment date. For a production commitment, request the complete schedule in writing, including component date codes, lot information, quality assurance, and any authorized-chain documentation.
Is ADSP-2104BPZ-80 in stock?
Current stock for ADSP-2104BPZ-80 should be confirmed through the Request a Quote form on this page rather than inferred from a listing. A stock response should distinguish immediately available inventory from factory or authorized-channel lead time and identify whether units are new, traceable, and supplied in the requested tube packaging. This distinction is particularly important for legacy DSP processors used in long-lived industrial and communications equipment.
Is ADSP-2104BPZ-80 suitable for real-time signal processing?
The ADSP-2104BPZ-80 is suitable for real-time fixed-point signal-processing work because it is a dedicated 16-bit DSP with a 20 MHz clock, 20 MIPS processing rate, and enhanced Harvard architecture. The architecture combines an instruction bus with two data buses to support parallel data movement. Application suitability also depends on algorithm throughput, external memory access, serial-port timing, interrupt latency, and whether the required peripherals are implemented in the surrounding system.
What can replace ADSP-2104BPZ-80?
No complete drop-in replacement for the ADSP-2104BPZ-80 was established by the available manufacturer information or cross-reference results. A valid replacement must match the 68-pin PLCC footprint, pin assignments, 5 V electrical interface, 16-bit fixed-point architecture, clock requirements, memory interfaces, and peripheral timing. A processor with similar MIPS performance alone is not sufficient, so any candidate should be validated against the datasheet pinout and software behavior.
What is the best drop-in replacement for ADSP-2104BPZ-80?
The best drop-in replacement cannot be named from a generic cross-reference result alone because the available results do not identify a candidate with the same 68-pin PLCC footprint and verified pin-to-pin compatibility. The ADSP-2104 family shares a common core, but that relationship does not prove that every family member has identical memory, serial-port, timing, or package assignments. Request current sourcing through the Request a Quote form and require manufacturer documentation before treating any alternative as a drop-in replacement.
What is the best Analog Devices equivalent for ADSP-2104BPZ-80?
No Analog Devices member can be called a verified drop-in equivalent to the ADSP-2104BPZ-80 from the available technical information. The manufacturer states that the ADSP-2104 and ADSP-2109 processors share a common DSP core, but they differ in on-chip memory features, and the available information does not establish a 68-pin, pin-to-pin compatible ADSP-2109 ordering code. Use the common-core relationship only as a starting point for architecture review, not as proof of PCB compatibility.
ADSP-2104BPZ-80 vs ADSP-2109 — which is better for a new design?
The ADSP-2104BPZ-80 is the more appropriate choice when maintaining an existing 68-pin PLCC design because its documented package, 5 V operation, 20 MHz clock, and pin configuration are tied to the target application. The ADSP-2109 shares the family core but is not established as pin-to-pin compatible. For a new design, compare memory architecture, peripherals, development-tool support, lifecycle status, and software portability rather than selecting by the 20 MHz clock alone.
When should I choose ADSP-2104BPZ-80 instead of a modern DSP?
Choose the ADSP-2104BPZ-80 when preserving an existing board, software investment, interface arrangement, or regulated legacy system is more important than adopting a modern processor platform. Its fixed-point architecture and dedicated datapaths remain useful for established control and signal-processing routines. For a new product with expanding connectivity, security, tooling, or lifecycle requirements, evaluate a supported MCU or DSP family and budget for hardware, firmware, and qualification changes.

Dữ liệu tham khảo kỹ thuật cho ADSP-2104BPZ-80 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the ADSP-2104BPZ-80 when an existing 68-pin PLCC design must be maintained, its validated fixed-point algorithms are available, and replacing the processor would create unnecessary hardware and software risk. Its 20 MHz clock, 20 MIPS rate, 1.5 kB of on-chip RAM, synchronous serial port, and programmable timer make it suitable for established industrial, communication, audio, measurement, and motion-control platforms. Do not select a general-purpose microcontroller solely by clock speed; verify interrupt behavior, numeric throughput, memory organization, serial timing, and software dependencies. The ADSP-2109 shares the family core but is not established here as a pin-to-pin substitute, and its program-ROM feature distinguishes it from the ADSP-2104. For a new platform with expanding connectivity, security, software support, or lifecycle requirements, evaluate a currently supported processor family. For a repair, use the exact grade, package, and programming configuration of the removed device.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Package 68-pin PLCC (J-lead), 24.23 mm × 24.23 mm
Brand Analog Devices
Product Type Fixed-point digital signal processor
Word Length 16 bit
Clock Frequency 20 MHz
Processing Rate 20 MIPS
Supply Voltage 5 V
On-Chip RAM 1.5 kB
Operating Temperature -40 °C to +85 °C
Architecture Enhanced Harvard architecture with three-bus performance

Bảo phân biệt quan trọng

  • Dedicated 16-bit fixed-point processing (vsADSP-2109)
  • Defined legacy package configuration (vsADSP-2109)
  • Enhanced three-bus signal-processing architecture (vsGeneral-purpose 8/16-bit microcontroller alternatives)

Ghi chú thiết kế

Use the ADSP-2104 manufacturer package drawing and pin-description table to establish the 68-pin PLCC land pattern; do not substitute a generic 68-pin PLCC footprint from memory. Confirm lead pitch, body size, pin numbering, orientation, and any thermal or exposed features. Keep clock, reset, and serial-port routing away from sensitive analog inputs, and place supply bypass components adjacent to the relevant pins with short, low-inductance connections.

Design the 5 V rail for both the processor and its external logic interface. Place local high-frequency bypass capacitance close to the supply and ground pins, and provide bulk capacitance at the board's power-distribution entry point. Confirm startup current, clock frequency, external-memory loading, and serial-port activity against the manufacturer limits before selecting regulators and magnetics. No regulator or capacitor values should be chosen without the complete worst-case load and sequencing requirements.

Treat clock and serial-interface routing as timing-critical nets. Use a short, continuous clock path, provide a controlled return path, and avoid routing the clock adjacent to switching or high-current outputs. Confirm serial-port input and output timing against the connected converter or transceiver. If external memory is used, apply the processor's bus timing and layout requirements exactly rather than relying only on the generic enhanced Harvard architecture description.

A common mistake is treating the ADSP-2104 and ADSP-2109 family's shared DSP core as proof of pin compatibility. Common architecture does not guarantee identical on-chip memory, peripheral configuration, package assignments, or external bus behavior. Validate reset behavior, interrupt vectors, serial-port timing, memory sizing, and clock requirements against the specific device datasheet. For legacy production, also document the grade suffix and inspect incoming devices for storage, marking, and package consistency.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The manufacturer product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for this ordering code. AEC-Q100 qualification is not applicable to the identified industrial-temperature processor.

Dữ liệu được xác minh vào: 2026-11-10 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

ADSP-2104BPZ-80 ADSP-2104BPZ-80 datasheet ADSP-2104BPZ-80 datasheet pdf ADSP-2104BPZ-80 pinout ADSP-2104BPZ-80 specifications ADSP-2104BPZ-80 equivalent ADSP-2104BPZ-80 replacement ADSP-2104BPZ-80 cross reference ADSP-2104BPZ-80 vs ADSP-2109 ADSP-2104BPZ-80 price ADSP-2104BPZ-80 stock Analog Devices ADSP-2104BPZ-80 ADSP-2104BPZ-80 68 PLCC ADSP-2104BPZ-80 20MHz DSP ADSP-2104BPZ-80 signal processing

Các bộ phận và thuật ngữ liên quan

Analog Devices ADSP-2104BPZ-80 ADSP-2104 ADSP-2109 digital signal processor DSP fixed-point processor 16-bit processor microprocessor embedded processor semiconductor enhanced Harvard architecture three-bus architecture instruction bus data bus power supply rejection ratio synchronous serial port programmable timer on-chip RAM 20 MHz clock 20 MIPS 68-pin PLCC J-lead package surface mount RoHS
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ