ADSP-BF609BBCZ-5 - Dual-Core Blackfin DSP 500MHz, 349-BGA | ADI
N.º da peça: ADSP-BF609BBCZ-5 ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $48.75 | $48,75 |
| 10 | $44.1 | $441,00 |
| 100 | $39.45 | $3.945,00 |
| 500 | $35.2 | $17.600,00 |
| 1.000 | $31.8 | $31.800,00 |
ADSP-BF609BBCZ-5 Visão geral
A DSP (Digital Signal Processor) is a specialized microprocessor optimized for real-time numerical computation on streaming data — a core building block of signal processing chains, sensor fusion systems, and machine learning inference at the edge. Within the broader taxonomy, the ADSP-BF609 belongs to the Blackfin family of converged DSP/MCU processors, which sit alongside ADSP-21xxx fixed-point, ADSP-TSxxx TigerSHARC floating-point, and SHARC (ADSP-2143xxx/2148xxx) families from Analog Devices. It is positioned for vision applications where a programmable CPU is paired with deterministic image-pipeline accelerators.
Key features include a dual-core fixed-point engine at 500 MHz, on-chip L1 memory with configurable SRAM/cache architecture, an integrated PVP image-pipeline accelerator with hardware ISP blocks, and a rich peripheral set including CAN, USB, Ethernet MAC, PPI (Parallel Peripheral Interface), SPI, TWI, UART, and timers. The part runs from a 1.25 V core / 1.8 V / 3.3 V I/O supply and supports industrial -40 C to +85 C operation.
Architecture combines dual-MAC signal processing engines, deterministic interrupt handling, and low power consumption for embedded deployment. The PVP offloads common image-pipeline operations (filtering, color conversion, geometric distortion) from the cores, freeing CPU bandwidth for analytics.
Typical applications include automotive advanced driver assistance systems (ADAS), industrial machine vision and robotics, security/surveillance video analytics, bar-code scanners, and biometrics systems.
When designing, ensure DDR memory sharing for both cores and route the high-speed PPI/video bus with controlled-impedance traces; the BGA requires PCB with microvia stack-up and matched-length differential routing for MIPI/parallel video.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on typical distributor pages.
Alternativas drop-in para ADSP-BF609BBCZ-5 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com ADSP-BF609BBCZ-5 (mesmo formato e footprint) — diferindo em Core Architecture.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
ADSP-BF608BBCZ-5
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ADSP-BF607BBCZ-5
✅ Drop-In✓ Em estoque
$28.9 / unidade
Ver ficha técnica →ADSP-BF606BBCZ-5
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ADSP-BF609BBCZ-5 Especificações
| Core Architecture | Blackfin Dual-Core (2x fixed-point DSP cores) |
| Core Clock Speed | 500 MHz |
| Data Word Width | 16-bit / 32-bit fixed-point |
| On-chip Accelerator | Pipelined Vision Processor (PVP) |
| Encapsulamento | 349-ball CSP-BGA, 19x19 mm |
| Tipo de montagem | Surface Mount (BGA) |
| Faixa de temperatura de operação | -40 C to +85 C (industrial) |
| Core Supply Voltage | 1.25 V (internal) |
| I/O Supply Voltages | 1.8 V / 2.5 V / 3.3 V |
| Series | ADSP-BF60x (Blackfin) |
| Family | Blackfin / ADSP-BFxxx |
| Instruction Set | Blackfin MSA (RISC-like DSP instruction set) |
| Packaging Format | Tray |
| Status do ciclo de vida | Active (per ADI web listing) |
| Status RoHS | Compliant |
Guia de Configuração de Pinos do ADSP-BF609BBCZ-5 349-ball csp-bga, 19x19 mm
Configuração de pinos para ADSP-BF609BBCZ-5 (pacote 349-ball csp-bga, 19x19 mm). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.
Nenhum dado detalhado de pinagem disponível para ADSP-BF609BBCZ-5.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
ADSP-BF609BBCZ-5 é adequado para 6 aplicaçãos: Automotive ADAS (Advanced Driver Assistance Systems), Industrial Machine Vision and Robotics, Security and Surveillance Video Analytics, Bar-Code and 2D Code Scanners, Embedded Biometrics and Iris/Face Recognition, Drone and UAV Vision Payloads.
Automotive ADAS (Advanced Driver Assistance Systems)
The ADSP-BF609BBCZ-5's dual 500 MHz Blackfin cores plus integrated Pipelined Vision Processor make it a strong fit for front-camera ADAS platforms. The PVP offloads common image-pipeline stages (color conversion, lens correction, noise filtering), freeing the cores for object-detection analytics at 30-60 fps. The 349-ball BGA is qualified for automotive in-cabin temperature profiles, and its CAN bus interfaces integrate with vehicle networks. Designers pair this DSP with image sensors over the parallel peripheral interface (PPI) and run OpenCV-style analytics on the cores.
Recomendado
Industrial Machine Vision and Robotics
On factory floors the ADSP-BF609BBCZ-5 powers high-throughput inspection lines where deterministic latency is mandatory. The PVP accelerates common image-processing operators (Sobel, convolutions, color-space conversion) at wire speed, while the dual cores run classification and decision logic. Industrial temperature grade (-40 C to +85 C) suits uncontrolled environments, and the parallel PPI interface accepts standard machine-vision sensors without external glue logic. This part ships in low-volume tray and dropped form factor per Octopart listings as of 2026-10-06.
Recomendado
Security and Surveillance Video Analytics
For IP cameras and NVR analytics the ADSP-BF609BBCZ-5 runs motion-detection, people-counting, and intrusion analytics on compressed video streams. The integrated Ethernet MAC plus USB OTG enable direct network attachment, and the dual cores handle codec decode and analytics in parallel. Industrial temperature grade ensures operation in outdoor enclosures. The 349-ball BGA keeps the BOM compact, and the parallel video interface accepts raw sensor data for analytics that don't require full decode.
Recomendado
Bar-Code and 2D Code Scanners
Industrial hand-held and fixed-mount scanners benefit from the ADSP-BF609BBCZ-5's image-pipeline acceleration for real-time decode of 1D/2D codes including Data Matrix and QR. The PVP accelerates image preprocessing (rotation, scaling, perspective correction), while the dual cores run decode algorithms at high frame rates. Industrial temperature grade supports warehouse and freezer environments. The 349-ball BGA footprint is shared across the BF60x family, simplifying PCB variants.
Recomendado
Embedded Biometrics and Iris/Face Recognition
Biometric access-control and identity-verification systems use the ADSP-BF609BBCZ-5 for on-device image preprocessing and template matching. The PVP executes retina/iris segmentation at deterministic latency, and the dual cores run matching algorithms against stored templates. The integrated Ethernet MAC and USB enable flexible deployment in wall-mounted terminals. Industrial temperature grade suits outdoor kiosks and unheated installations. The 349-ball CSP-BGA is footprint-compatible across the BF60x family.
Recomendado
Drone and UAV Vision Payloads
Small UAVs and aerial imaging platforms use the ADSP-BF609BBCZ-5 for on-board stabilization, target tracking, and obstacle detection at low power. The dual 500 MHz Blackfin cores deliver deterministic analytics, and the PVP handles image preprocessing without external ISP silicon. The 349-ball BGA's compact footprint suits SWaP-constrained airframes, and the industrial temperature grade covers altitude-related cold. Designers pair this DSP with small CMOS sensors and stream analytics over the integrated Ethernet MAC.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ADSP-BF609BBCZ-5 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ADSP-BF608BBCZ-5 | ADSP-BF607BBCZ-5 | ADSP-BF606BBCZ-5 |
|---|---|---|---|---|
| Package | 349-ball CSP-BGA (19x19 mm) | 349-ball CSP-BGA (19x19 mm) - same | 349-ball CSP-BGA (19x19 mm) - same | 349-ball CSP-BGA (19x19 mm) - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Core Clock Speed | 500 MHz | 500 MHz (mid-tier) | 500 MHz (lower-tier) | 500 MHz (lowest-tier) |
| Core Count | 2 (Dual-Core) | 2 | 2 | 2 |
| Vision Processor (PVP) | Yes (full) | Yes (mid) | Yes (reduced) | Yes (limited) |
| Operating Temperature Range | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
| Core Supply Voltage | 1.25 V | 1.25 V | 1.25 V | 1.25 V |
| RoHS Status | Compliant | Compliant | Compliant | Compliant |
Principais diferenciais
- Highest-tier BF60x member at full 500 MHz per core (vs ADSP-BF606BBCZ-5)
- Integrated Pipelined Vision Processor (PVP) for hardware image-pipeline (vs ADSP-TS203SBBPZ050)
- Dual-core 16-/32-bit fixed-point with deterministic real-time response (vs ADSP-BF607BBCZ-5)
Notas de projeto
The 349-ball CSP-BGA requires a multilayer PCB with microvia stack-up (typically 6-8 layers) and a controlled-impedance fan-out for the parallel peripheral interface (PPI) video bus. Route high-speed video traces as 50 Ohm single-ended or 100 Ohm differential pairs with matched-length routing. The exposed center pads beneath the BGA must be soldered with proper paste-stencil apertures to avoid head-in-pillow defects; this is critical because the package draws its core current through the center balls.
Estimated: at 1.25 V core and 500 MHz with both cores active, the ADSP-BF609BBCZ-5 draws approximately 1.0-1.2 W typical core power. With a 349-ball BGA, thermal resistance theta_JA depends strongly on inner copper array; with adequate thermal via array under the center balls, theta_JA drops to ~15-20 C/W. Use a thermal-via array connecting all BGA center ground balls to inner copper planes for best heat extraction; without this array, junction temperature can exceed 100 C at the industrial temperature without external heatsinking.
Place decoupling capacitors as close as possible to every power ball. Use 100 nF X7R ceramic capacitors on each VDDINT and VDDIO ball (one cap per ball pair minimum), plus bulk 10-100 uF tantalum/polymer capacitors on each supply rail. Keep the DDR/DDR2 memory interface (if used) on the same PCB layer as the DSP with matched-length traces for DQ/DQS/CLK/Address/Control, per the ADSP-BF60x hardware reference manual.
Do not exceed 1.35 V on the core supply or 3.6 V on the 3.3 V I/O supply; both are pin-side outputs of internal regulators and must be filtered but not back-driven. Ensure the boot mode pins are pulled to the correct state at reset to select the correct boot source (SPI flash, UART, or OTP). Failing to configure boot pins correctly causes no-boot / no-startup symptoms that look like dead parts.
Informações de conformidade
RoHS compliant per Analog Devices product listing. Industrial temperature grade (-40 C to +85 C) per datasheet. Not AEC-Q100 qualified for automotive - contact Analog Devices for automotive-qualified variants if needed.
