Microchip Technology

AT90CAN64-15AT1 - 15MHz 64KB CAN AVR MCU | Microchip

N.º da peça: AT90CAN64-15AT1 ✓ Ativo
4.5 V to 5.5 V Vdss 64-pin TQFP, 14 mm x 14 mm Package 15 MHz Speed 64 KB Memory
MOQ: 1 |

AT90CAN64-15AT1 Visão geral

The Microchip Technology AT90CAN64-15AT1 is an 8-bit AVR RISC microcontroller with a 15 MHz clock, 64 KB of flash memory, an integrated CAN controller, and 53 general-purpose I/O lines in a 64-pin TQFP package. It combines a 4.5 V to 5.5 V operating range with in-system programming and read-while-write flash capabilities for embedded control systems.

An 8-bit AVR microcontroller is a compact reduced-instruction-set computer optimized for embedded control. The AVR architecture executes most instructions in a single clock cycle and provides 32 general-purpose working registers. When combined with an embedded CAN controller, this device belongs to the communication-focused microcontroller hierarchy used for distributed industrial, automotive, and control-system nodes that need deterministic messaging over a multi-node bus.

The AT90CAN64-15AT1 provides 64 KB of program flash, 2 KB of EEPROM, and 4 KB of SRAM according to the Microchip product-page description. Its integrated CAN controller supports CAN 2.0A and CAN 2.0B communication formats. The 53 general-purpose I/O lines support digital interfaces and peripheral functions, while the 15 MHz operating speed provides additional processing headroom for protocol handling, diagnostics, and supervisory control tasks.

The device uses Microchip's AVR architecture with 133 instructions and 32 general-purpose working registers. Its 64-pin TQFP package exposes the GPIO, communication, timing, and programming resources needed for a standalone CAN node. The automotive-oriented ordering code is identified as AEC-Q100 qualified in the component data for AT90CAN64-15AT1, although qualification details should be checked against the exact ordering-code table before production release.

Typical uses include industrial CAN gateways, automotive body and powertrain control modules, elevator and building-control nodes, instrumentation, motor-control supervisory electronics, and diagnostic tools. Its combination of 53 I/O lines, serial peripherals, and CAN support reduces the need for external interface logic in compact embedded controllers.

For PCB design, preserve the manufacturer's recommended decoupling and clock layout, provide programming access for ISP, and route CAN RX and TX with controlled impedance. Check the complete TQFP pin-assignment table in the manufacturer datasheet before assigning multiplexing functions or planning a footprint revision.

This page consolidates the key electrical limits, communication capabilities, pinout considerations, and engineering trade-offs into a practical selection reference for AT90CAN64-15AT1 designs.

Alternativas drop-in para AT90CAN64-15AT1 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com AT90CAN64-15AT1 (mesmo formato e footprint) — diferindo em Package, Instruction Set, Product Type, CAN Controller, Maximum Clock Speed.

Microchip Technology
Package: 64-lead TQFP, 14 mm x 14 mm
Instruction Set: AVR enhanced RISC architecture
Comparar com AT90CAN64-15AT1 →
Microchip Technology
Package: 64-pin TQFP, 14 mm x 14 mm
Product Type: 8-bit AVR RISC microcontroller with CAN controller
CAN Controller: CAN 2.0A and CAN 2.0B compliant
Comparar com AT90CAN64-15AT1 →
Microchip Technology
Package: 64-QFN, 9 mm x 9 mm, exposed pad
Maximum Clock Speed: 16 MHz
Comparar com AT90CAN64-15AT1 →
Microchip Technology
Package: 64-QFN, 9 x 9 mm
Instruction Set: 133 powerful instructions
Product Type: 8-bit AVR RISC-based microcontroller
Comparar com AT90CAN64-15AT1 →
Microchip Technology
Instruction Set: 133 powerful AVR instructions, most single-cycle execution
Product Type: 8-bit RISC Flash Microcontroller (MCU)
CAN Controller: Integrated, CAN 2.0A / CAN 2.0B compliant
Comparar com AT90CAN64-15AT1 →
Microchip Technology
Package: 64-QFN, 9 x 9 mm
Product Type: 8-bit RISC Flash Microcontroller
Maximum Clock Speed: 16 MHz
Comparar com AT90CAN64-15AT1 →

AT90CAN64-15AT

✅ Drop-In
Microchip Technology
📦 64-pin TQFP (14 mm x 14 mm)
8-bit AVR RISC microcontroller with CAN controller · 64 KB ISP flash with read-while-write capability · 2 KB · 4 KB · 15 MHz · 8 bit · 53 · 32

Consulte o preço

Ver ficha técnica →

AT90CAN64-15MT

✅ Drop-In
Microchip Technology
📦 64-pin TQFP (14 mm x 14 mm)
8-bit AVR RISC microcontroller · 16 MHz · 128 KB · Supported · 2 KB · 4 KB · 53 · 32

Consulte o preço

Ver ficha técnica →

AT90CAN64-15MZ

✅ Drop-In
Microchip Technology
📦 64-pin TQFP (14 mm x 14 mm)
8-bit AVR RISC-based microcontroller · 16 MHz · 4.5 V to 5.5 V · 128 KB ISP flash · 2 KB · 4 KB · 53 · 32

Consulte o preço

Ver ficha técnica →

AT90CAN64-16MU

✅ Drop-In
Microchip Technology
📦 64-pin TQFP (14 mm x 14 mm)
8-bit RISC Flash Microcontroller · AVR enhanced RISC · 8 bit · 16 MHz · 64 KB · 64K x 8 bits · 2 KB · 4 KB

Consulte o preço

Ver ficha técnica →

AT90CAN64-16AU

✅ Drop-In
Microchip Technology
📦 64-pin TQFP (14 mm x 14 mm)
8-bit RISC Flash Microcontroller (MCU) · AVR enhanced RISC architecture · 8 bit · 16 MHz · 64 KB (ISP, read-while-write capable) · 4 KB · 4 KB · 53

Consulte o preço

Ver ficha técnica →

AT90CAN64-15AT1 Classificações máximas e características elétricas

Product Type 8-bit AVR RISC microcontroller with CAN controller
Maximum Clock Speed 15 MHz
Flash Memory 64 KB
EEPROM Memory 2 KB
SRAM 4 KB
General-Purpose I/O Lines 53
General-Purpose Working Registers 32
CAN Controller CAN 2.0A and CAN 2.0B compliant
Tensão de alimentação 4.5 V to 5.5 V
Instruction Set 133 instructions
Program Memory Features ISP flash with read-while-write capability
Largura do barramento de dados 8 bit
Encapsulamento 64-pin TQFP, 14 mm x 14 mm
Tipo de montagem Surface mount
Automotive Qualification AEC-Q100
Lifecycle Stage Active

Guia de Configuração de Pinos do AT90CAN64-15AT1 64-pin tqfp, 14 mm x 14 mm

Configuração de pinos para AT90CAN64-15AT1 (pacote 64-pin tqfp, 14 mm x 14 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 64-pin tqfp, 14 mm x 14 mm para AT90CAN64-15AT1

Nenhum dado detalhado de pinagem disponível para AT90CAN64-15AT1.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

AT90CAN64-15AT1 é adequado para 6 aplicaçãos: Industrial CAN Gateway, Automotive Body Control Module, Elevator and Building Control, Industrial Motor Supervision, CAN Diagnostic and Test Tool, Instrumentation and Sensor Node.

🏭

Industrial CAN Gateway

The AT90CAN64-15AT1 fits an industrial CAN gateway because its integrated CAN controller and 53 general-purpose I/O lines can handle communication alongside local supervision functions. Its 15 MHz AVR core provides execution capacity for message filtering, status monitoring, and protocol translation, while 64 KB of flash supports application firmware and 4 KB of SRAM supports short-lived packet and control buffers. The 4.5 V to 5.5 V range supports a conventional embedded supply architecture. In implementation, the MCU connects to a suitable CAN transceiver rather than directly driving the bus, and the PCB should keep decoupling, clock routing, and differential CAN traces tightly controlled.

🚗

Automotive Body Control Module

The AT90CAN64-15AT1 is appropriate for compact body-control and vehicle-network modules that combine CAN communication with discrete I/O. Its 53 general-purpose I/O lines can connect switches, sensors, indicators, and diagnostic logic without requiring a large external interface device, while the 15 MHz core executes supervisory and debounce routines. The part is identified as an automotive AEC-Q100 configuration, supporting use in electronic control units where qualification status is important. Design engineers should still confirm the exact temperature grade and ordering limits, isolate vehicle transients at the connector and transceiver interfaces, and use hardware watchdog and fail-safe power strategies.

🏢

Elevator and Building Control

AT90CAN64-15AT1 supports elevator and building-control nodes where distributed CAN communication must coexist with digital input acquisition and actuator control. The combination of 53 I/O lines, 32 working registers, and a 15 MHz AVR core is useful for polling floors, doors, safety switches, and call requests while maintaining a network schedule. Its 2 KB EEPROM can retain small configuration records, although the application must observe the device's endurance and write-cycle guidance. A robust implementation uses an isolated or protected CAN transceiver, local power filtering, and a defined behavior for loss of communication or bus termination faults.

⚙️

Industrial Motor Supervision

The AT90CAN64-15AT1 can serve as the supervisory controller in an industrial motor system where a drive controller communicates over CAN and the supervisory MCU manages interlocks, temperature monitoring, or service diagnostics. Its 53 I/O lines simplify connection of discrete sensors and status signals, and its 15 MHz core can execute control logic concurrently with network tasks. The MCU should remain isolated from high-energy motor wiring, with protection networks handling transients and proper isolation preserving communications integrity. Firmware should include communication-loss timers, safe-state transitions, and deliberate handling of both the 4.5 V and 5.5 V supply boundaries.

🔧

CAN Diagnostic and Test Tool

AT90CAN64-15AT1 is well suited to compact CAN diagnostic tools because it combines network communication, programmable flash, EEPROM, and abundant GPIO in one package. Engineers can implement message monitoring, fault logging, stimulus sequencing, and external instrument interfacing around the 15 MHz core. The 64 KB flash provides room for protocol handlers and diagnostic firmware, while the CAN controller provides the communication core required to interpret bus traffic. In a portable instrument, attention should be directed to supply regulation, connector protection, and the fact that the MCU requires an external transceiver. Programming and firmware-update access should also be designed into the PCB.

📟

Instrumentation and Sensor Node

The AT90CAN64-15AT1 can form a compact instrumentation node that samples digital sensors and publishes measurements through a CAN network. Its 53 general-purpose I/O lines reduce the need for external I/O expansion, while 4 KB of SRAM and 2 KB of EEPROM support temporary data and configuration storage. The 15 MHz AVR core allows measurement acquisition, filtering, and communication tasks to coexist in a single device. Designers should assign peripheral multiplexing from the official TQFP pin table, add analog front-end circuitry separately for non-digital sensors, and apply communication and input protection where field wiring enters the enclosure.

Resumo dos produtos recomendados

AT90CAN32-16MUR Microchip Technology Usado em: Industrial CAN Gateway, Elevator and Building Control, Industrial Motor Supervision, CAN Diagnostic and Test Tool ATSAMD21G17A-AF Microchip Technology Usado em: Industrial CAN Gateway, Industrial Motor Supervision, CAN Diagnostic and Test Tool ATSAML11E16A-AF Microchip Technology Usado em: Automotive Body Control Module ATSAME54P20A-AU Microchip Technology Usado em: Automotive Body Control Module ATSAMD21G16A-MU Companion microcontroller for local automation functions Usado em: Elevator and Building Control MCP3561RT-I/MD Precision ADC for analog instrumentation channels Usado em: Instrumentation and Sensor Node MCP3421AD-I/ML Low-power ADC for sensor-node acquisition Usado em: Instrumentation and Sensor Node
What are the key specifications of AT90CAN64-15AT1 that engineers should know?
The AT90CAN64-15AT1 combines a 15 MHz AVR 8-bit core, 64 KB of flash, 2 KB of EEPROM, 4 KB of SRAM, 53 general-purpose I/O lines, and an integrated CAN controller in a 64-pin TQFP package. According to the Microchip product page, its architecture provides 32 general-purpose working registers and supports CAN 2.0A and CAN 2.0B formats. The device operates from 4.5 V to 5.5 V, making its principal strengths its communication capability, mixed on-chip memory, and relatively high I/O count for an 8-bit controller.
What is the AT90CAN64-15AT1 and where can its datasheet be downloaded?
The AT90CAN64-15AT1 is a Microchip Technology 8-bit AVR microcontroller with a 15 MHz clock and an integrated CAN controller. The official Microchip product page at https://www.microchip.com/en-us/product/AT90CAN64 provides the manufacturer datasheet and product resources. Search the page for AT90CAN64 and select the automotive ordering option AT90CAN64-15AT1 when downloading documentation, because related speed grades and package codes have distinct limit tables and qualification details.
Where can I find the AT90CAN64-15AT1 pinout and TQFP-64 footprint?
The AT90CAN64-15AT1 uses a 64-pin TQFP package measuring 14 mm by 14 mm. Use the pin-assignment table and package drawing in the Microchip AT90CAN64 datasheet to map the 53 general-purpose I/O lines, power pins, clock inputs, programming signals, and CAN RX/TX functions. A separate AT90CAN64 pinout reference identifies both QFN-64 and TQFP-64 implementations, but the land pattern and numbering must match the 64-pin TQFP option rather than the QFN-64 option.
Is AT90CAN64-15AT1 suitable for automotive CAN applications?
The AT90CAN64-15AT1 is identified as an automotive, AEC-Q100-qualified part in its component description. Its 4.5 V to 5.5 V operating range, integrated CAN 2.0A/2.0B controller, 53 I/O lines, and 15 MHz AVR core support compact CAN nodes requiring both communication and control functions. Before approving a production design, confirm the exact temperature grade, qualification status, and ordering-code limits in the manufacturer datasheet, then review CAN transceiver and network-termination requirements separately.
Where can I buy AT90CAN64-15AT1 and what is the current lead time?
Use the Request a Quote form on this page to request AT90CAN64-15AT1 pricing, current stock, minimum order quantity, and lead time. The component is listed as an active AT90CAN64-family device, but production planning still requires a date-specific commitment for the exact 64-pin TQFP ordering code. Include the required quantity, date code policy, packaging format, and target ship-to region when submitting the request so the manufacturing schedule can be confirmed.
How much does AT90CAN64-15AT1 cost?
The current commercial price for AT90CAN64-15AT1 should be obtained through the Request a Quote form on this page. Quote requests are required because unit pricing can change with quantity, stock position, date code, and packaging requirements. The form should be used for the exact AT90CAN64-15AT1 MPN rather than a generic AT90CAN64 family designation, ensuring that the quotation covers the 15 MHz, 64-pin TQFP configuration and automotive ordering option.
Is AT90CAN64-15AT1 in stock for immediate shipment?
Current stock for AT90CAN64-15AT1 is confirmed through the Request a Quote form on this page. Availability may vary with order quantity and inventory allocation, so a rapid-response quote is the appropriate way to establish shipment timing for production use. State the required date codes, annual usage, and whether multiple delivery lots are acceptable when requesting the quotation.
What can replace AT90CAN64-15AT1 without changing the PCB footprint?
AT90CAN64-15AT, AT90CAN64-15MT, AT90CAN64-15MZ, AT90CAN64-16MU, and AT90CAN64-16AU are same-family AT90CAN64 candidates associated with the 64-pin TQFP footprint. The most conservative choice is the part matching the original speed, temperature grade, package code, and qualification requirements. Before substituting any candidate, compare clock timing, electrical limits, pin multiplexing, flash behavior, and the manufacturer ordering-information table because suffix changes can alter commercial or qualification status even when the land pattern is unchanged.
AT90CAN64-15AT1 vs AT90CAN64-16AU - which is better for a CAN controller?
AT90CAN64-16AU offers a 16 MHz maximum clock, 6.7% above the 15 MHz AT90CAN64-15AT1, while both are associated with the 64-pin TQFP AT90CAN64 family. The faster grade can reduce loop execution time, but it does not increase the specified CAN-controller data rate and may affect timing margins. Choose the original 15 MHz grade when software timing is already validated; choose the 16 MHz grade only after recompiling and confirming the complete electrical and qualification requirements.
What is the difference between AT90CAN64-15AT1 and AT90CAN64-16MU?
The principal stated difference is maximum clock speed: AT90CAN64-16MU is rated to 16 MHz, while AT90CAN64-15AT1 is rated to 15 MHz, a 6.7% increase for the former. Both belong to the AT90CAN64 family and are associated with the 64-pin TQFP footprint. The faster processor shortens instruction execution time, but CAN baud rate, peripheral timing, startup behavior, and qualification requirements must still be checked before treating the 16 MHz device as interchangeable.
When should I choose AT90CAN64-15AT1 over AT90CAN64-16MU?
Choose AT90CAN64-15AT1 when an existing design is qualified around a 15 MHz clock and preserving timing behavior, software validation results, and automotive ordering conditions is more important than gaining 6.7% processor throughput. The 16 MHz AT90CAN64-16MU can benefit compute-heavy control loops, but the change requires recompilation and peripheral-timing review. Neither higher CPU frequency nor the 15 MHz clock determines CAN bus speed, which is configured through the CAN controller and external transceiver.
Is AT90CAN64-15AT1 suitable for an industrial CAN gateway?
The AT90CAN64-15AT1 is suitable for an industrial CAN gateway when the design needs local control alongside network communication. Its 15 MHz AVR core, 64 KB flash, 2 KB EEPROM, 4 KB SRAM, 53 I/O lines, and integrated CAN controller provide substantial resources for routing, monitoring, diagnostics, and peripheral control. Use the 4.5 V to 5.5 V range to define the power architecture, add an appropriate CAN transceiver, and isolate the communication interface where the installation requires surge protection or galvanic separation.
Is AT90CAN64-15AT1 the same as AT90CAN64-15AT?
AT90CAN64-15AT1 and AT90CAN64-15AT are closely related AT90CAN64 automotive ordering codes, but the final suffix should not be treated as interchangeable without checking the ordering table. The verified component description identifies AT90CAN64-15AT1 as a 64-pin TQFP device with a 15 MHz rating, while AT90CAN64-15AT appears in the cross-reference family information. Confirm the exact package code, temperature range, qualification statement, and marking in the Microchip datasheet before production substitution.
What is the best Microchip equivalent for AT90CAN64-15AT1?
The closest Microchip-family choices are the AT90CAN64 ordering codes that retain 64 KB flash, 53 I/O lines, and the 64-pin TQFP footprint while varying clock or suffix-specific commercial conditions. AT90CAN64-15AT is the most conservative frequency-matched candidate; AT90CAN64-16MU and AT90CAN64-16AU provide a 16 MHz option, while AT90CAN64-15MT and AT90CAN64-15MZ require verification of ordering details. No independent cross-brand equivalent is established by the documented technical information, so an MCU migration should not be treated as a zero-risk footprint substitution.
How should AT90CAN64-15AT1 be programmed?
The AT90CAN64-15AT1 supports in-system programming through the Microchip AVR programming interface, allowing firmware to be programmed while the device remains mounted on the target board. The manufacturer AT90CAN64 documentation contains the ISP interface, fuse, clock, and boot-related information. Preserve access to the ISP signals on the PCB, isolate conflicting boot or reset circuitry, and follow the electrical and timing requirements in the datasheet when connecting a programmer to a production unit.
What PCB considerations matter for an AT90CAN64-15AT1 CAN design?
Place the required bypass capacitors close to the power pins, keep the clock and sensitive return paths compact, and route CAN TX and RX as controlled-impedance differential signals where applicable. The AT90CAN64-15AT1 is an MCU rather than a CAN transceiver, so the design also needs a suitable transceiver, bus termination, protection strategy, and connector implementation. Check the exact 64-pin TQFP land pattern and pin multiplexing in the manufacturer documentation before releasing artwork.

Dados de referência de engenharia para AT90CAN64-15AT1 — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose AT90CAN64-15AT1 when an automotive-oriented 8-bit CAN node needs a 15 MHz AVR core, 64 KB of flash, 2 KB of EEPROM, 4 KB of SRAM, 53 I/O lines, and a 64-pin TQFP footprint without external expansion for basic control functions. The same-family AT90CAN64-15AT, -15MT, and -15MZ alternatives are practical starting points when the exact suffix ordering conditions match, but each should be checked against the required temperature grade, qualification, and marking. Use AT90CAN64-16MU or AT90CAN64-16AU when the additional 6.7% processor-clock margin justifies recompilation and timing review; the higher CPU clock does not automatically permit a higher CAN baud rate. For a design using substantially more flash, RAM, processing capacity, or mixed-signal peripherals, consider a higher-end MCU rather than treating a suffix change as a complete architectural upgrade.

Comparação com alternativas

Parâmetro Este produto AT90CAN64-15AT AT90CAN64-15MT AT90CAN64-15MZ AT90CAN64-16MU AT90CAN64-16AU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 64-pin TQFP (14 mm x 14 mm) 64-pin TQFP (14 mm x 14 mm) 64-pin TQFP (14 mm x 14 mm) 64-pin TQFP (14 mm x 14 mm) 64-pin TQFP (14 mm x 14 mm) 64-pin TQFP (14 mm x 14 mm)
Maximum Clock Speed 15 MHz 15 MHz 15 MHz 15 MHz 16 MHz 16 MHz
Flash Memory 64 KB 64 KB 64 KB 64 KB 64 KB 64 KB
EEPROM Memory 2 KB 2 KB 2 KB 2 KB 2 KB 2 KB
SRAM 4 KB 4 KB 4 KB 4 KB 4 KB 4 KB
General-Purpose I/O Lines 53 53 53 53 53 53
Operating Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V
CAN Controller CAN 2.0A and CAN 2.0B compliant CAN 2.0A and CAN 2.0B compliant CAN 2.0A and CAN 2.0B compliant CAN 2.0A and CAN 2.0B compliant CAN 2.0A and CAN 2.0B compliant CAN 2.0A and CAN 2.0B compliant

Principais diferenciais

  • Frequency-matched family option (vs AT90CAN64-16MU)
  • Integrated CAN and extensive I/O in one controller (vs AT90CAN64-16AU)
  • On-chip memory supports self-contained embedded nodes (vs AT90CAN64-15AT)

Notas de projeto

Place the required bypass capacitors immediately adjacent to the corresponding VCC and AVCC pins, with short ground-return paths to minimize supply inductance. Follow the manufacturer pin-assignment table before assigning multiplexed peripheral functions, because the 64-pin TQFP footprint exposes many alternate signals. Route the clock line away from CAN TX/RX and high-edge-rate switching nodes. Use the package drawing associated with the 64-pin TQFP option rather than adapting a QFN-64 land pattern.

The AT90CAN64-15AT1 requires an external CAN transceiver; connect its CAN RX and TX signals through the transceiver rather than to a physical bus directly. Preserve controlled-impedance CAN routing, provide termination only at appropriate bus locations, and keep the transceiver return path close to its ground reference. For longer or industrial cable runs, add surge and ESD protection at the connector while maintaining the protection network's effect on signal timing and common-mode behavior.

Design the 4.5 V to 5.5 V supply rail to remain inside the operating range at the microcontroller pins, including tolerance, startup overshoot, and transient margin. Check every peripheral and transceiver rail for sequencing conflicts, especially when an ISP programmer or external equipment can back-power the board. Decouple transceiver and regulator outputs separately from sensitive logic nodes, and provide a defined reset state for every rail that participates in CAN-node startup.

Do not infer that the 15 MHz CPU clock determines CAN baud rate; CAN timing is configured through the controller and transceiver interface. When moving between the 15 MHz and 16 MHz AT90CAN64 ordering codes, recompile the firmware and review timer, baud-rate, watchdog, and startup behavior. Also verify suffix-specific temperature grade, qualification status, and package code in the ordering table rather than relying only on the shared 64-pin TQFP footprint.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The component description identifies AT90CAN64-15AT1 as an automotive AEC-Q100 part. Other environmental and material-compliance declarations require confirmation from the manufacturer product page or current declaration documents.

Buscas relacionadas

at90can64 datasheet atmel at90can64 AT90CAN64-15AT1 datasheet AT90CAN64-15AT1 pinout AT90CAN64-15AT1 equivalent AT90CAN64-15AT1 replacement AT90CAN64-15AT1 price AT90CAN64-15AT1 TQFP-64 AT90CAN64-15AT1 CAN controller AT90CAN64-15AT1 vs AT90CAN64-16MU AT90CAN64-15AT1 application circuit AT90CAN64-15AT1 programming

Componentes & termos relacionados

Microchip Technology Atmel AT90CAN64-15AT1 AT90CAN64 AT90CAN64-15AT AT90CAN64-15MT AT90CAN64-15MZ AT90CAN64-16MU AT90CAN64-16AU AVR AVR RISC architecture 8-bit microcontroller CAN controller CAN 2.0A CAN 2.0B embedded control in-system programming read-while-write flash TQFP-64 64-pin TQFP surface mount general-purpose I/O AEC-Q100 industrial CAN
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ