ATF16LV8C-15SI - 15ns 8-Macrocell EECMOS PLD | Microchip
N.º da peça: ATF16LV8C-15SI ✓ AtivoATF16LV8C-15SI Visão geral
A simple programmable logic device, or SPLD, is a semiconductor between fixed logic and a field-programmable gate array. An SPLD combines AND-array logic, OR-array distribution, registered or combinational outputs, and programmable input/output behavior into one integrated circuit. This architecture makes SPLDs useful for compact glue logic, control sequencing, protocol adaptation, and legacy designs that need reliable nonvolatile configuration without a large FPGA.
The ATF16LV8C architecture supports three operating modes selected automatically by software. Eight outputs each receive eight product terms, enabling complex combinational functions in a compact device. Its 15 ns maximum pin-to-pin delay supports moderate-speed control logic, while the ATF16LV8C family covers speeds down to 10 ns. The device also provides pin-controlled power-down with a maximum 5 uA current and a typical 100 nA standby current, useful for reducing system power when logic activity is not required.
Flash-based configuration retains the programmed logic without a separate programmer after initial programming. This simplifies field updates and avoids volatile configuration loss. CMOS- and TTL-compatible inputs and outputs support integration with conventional digital logic families. The 20-SOIC package, measuring 0.295 inch by 7.50 mm, is also suitable for legacy industrial and commercial control boards that use through-hole-style SOIC footprints.
Typical uses include industrial control interfaces, legacy peripheral adapters, programmable I/O decoding, alarm and sequencing logic, and compact embedded systems that retain existing PLD-based architectures. ATF16LV8C devices can emulate many 20-pin PAL devices and most 20-pin combinatorial PLDs, making them useful when consolidating several small fixed-logic devices onto one configurable IC.
When designing around this device, verify the complete 20-pin interface, programming voltage, timing, and I/O behavior against the manufacturer datasheet before committing the PCB layout. Provide suitable decoupling at the supply pins and preserve the pin-controlled power-down function in low-power designs. Legacy PLD replacement also requires confirming that the programmed function, pin states, and board-level signal timing remain unchanged.
This product page combines the manufacturer specifications, package information, interface constraints, application guidance, and same-family replacement analysis. It also highlights where speed or temperature-grade differences must be checked before treating an alternative as a production drop-in replacement.
Alternativas drop-in para ATF16LV8C-15SI — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
ATF16LV8C-15SU
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
ATF16LV8C-20SI
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
ATF16LV8C-20SU
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
ATF16LV8C-10SI
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →ATF16LV8C-10SU
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
ATF16LV8C-15SI Classificações máximas e características elétricas
| Programmable Logic Technology | EECMOS with electrically erasable flash configuration memory |
| Device Architecture | Simple programmable logic device (SPLD) |
| Macrocell Count | 8 macrocells |
| Output Count | 8 outputs |
| Product Terms per Output | 8 product terms per output |
| Equivalent Gate Capacity | 250 gates |
| Maximum Pin-to-Pin Delay | 15 ns |
| ATF16LV8C Family Minimum Delay | 10 ns |
| Tensão de alimentação | 3 V |
| Power-Down Current | 5 uA maximum |
| Standby Current | 100 nA typical |
| Encapsulamento | 20-SOIC, 20 pins |
| Package Width | 7.50 mm |
| Package Body Length | 0.295 inch |
| Tipo de montagem | Surface-mount SOIC |
| Input Compatibility | CMOS and TTL compatible |
| Status RoHS | unknown |
Guia de Configuração de Pinos do ATF16LV8C-15SI 0.295 inch
Configuração de pinos para ATF16LV8C-15SI (pacote 0.295 inch). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para ATF16LV8C-15SI.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
ATF16LV8C-15SI é adequado para 6 aplicaçãos: Industrial Control and Sequencing, Programmable I/O and Bus Decoding, Legacy Peripheral Interface Consolidation, Alarm and Interlock Logic, Low-Power Embedded Control, Product Maintenance and Legacy Board Repair.
Industrial Control and Sequencing
The ATF16LV8C-15SI fits compact industrial control logic that coordinates discrete sensors, actuators, interlocks, and operating sequences. Its eight macrocells can implement multiple combinational or registered functions without consuming several separate generic logic devices, while the 15 ns pin-to-pin delay supports moderate-speed control paths. Flash-retained configuration preserves the programmed machine logic through power cycles, reducing the need for repeated in-field programming. Place the device in a 20-SOIC footprint with the supply and interface networks required by the ATF16LV8C family datasheet. The primary design check is timing margin: retain ATF16LV8C-15SI when 15 ns satisfies every worst-case path, or evaluate a 10 ns family option when greater propagation margin is beneficial without changing the board.
Recomendado
Programmable I/O and Bus Decoding
ATF16LV8C-15SI is appropriate for address decoding, peripheral selection, interrupt qualification, and programmable I/O behavior in legacy embedded systems. Eight outputs and eight product terms per output provide enough logic density to consolidate small decoding networks while retaining a straightforward 20-pin interface. The 15 ns maximum pin-to-pin delay should be checked against the system clock period and any external receiver requirements before layout is released. Because the device uses flash-retained configuration, engineers can update control decoding without adding volatile memory or a separate configuration reset mechanism. The same footprint also permits planned speed-grade substitutions during legacy-product maintenance, provided the selected suffix satisfies both timing and environmental requirements.
Recomendado
Legacy Peripheral Interface Consolidation
The ATF16LV8C-15SI can consolidate several small PAL or combinatorial PLD functions into one configurable device, making it useful when maintaining older peripheral-control boards. According to the manufacturer documentation, its architecture can emulate many 20-pin PAL devices and most 20-pin combinatorial PLDs, while three software-selected operating modes support different logic organizations. Consolidation reduces board area and the number of separate programming files, but each original function must be translated and verified against the new input, output, polarity, and registered-output behavior. The 250-equivalent-gate capacity and eight macrocells make this approach most practical for several small logic islands rather than a large state machine. Validate the converted design with system-level vectors before production release.
Recomendado
Alarm and Interlock Logic
ATF16LV8C-15SI is suitable for alarm aggregation, safety-interlock decoding, fault latching, and warning-signal generation in compact equipment. The eight programmable outputs can combine multiple sensor conditions and generate status signals without duplicating gates across separate logic packages, while flash configuration keeps the safety-related logic definition stable across restarts. Design the circuit so that power-down and output states during configuration or reset are compatible with the equipment's safe-state requirements. The 15 ns delay is appropriate for most qualification, debounce, and annunciation paths, but it must be included in the worst-case response calculation from sensor event to alarm output. Confirm all input thresholds and output timing in the manufacturer datasheet before using the device as part of an interlock chain.
Recomendado
Low-Power Embedded Control
The ATF16LV8C-15SI can implement standby, wake, routing, and supervisory functions in embedded systems that periodically disable unused logic. Its pin-controlled power-down mode supports a maximum 5 uA current, while typical standby current is 100 nA, helping reduce consumption when the associated processor or peripheral is inactive. Because the configuration remains in electrically erasable flash memory, the logic does not need to be reloaded after each power cycle. The design should define which pins force power-down, which signals remain valid in that state, and how the device returns to normal operation. Include the selected family variant's timing and temperature requirements in the power-budget and reliability calculations to ensure that the low-power mode functions correctly across the intended operating environment.
Recomendado
Product Maintenance and Legacy Board Repair
ATF16LV8C-15SI is useful for maintaining legacy boards that originally used an ATF16LV8C-compatible 20-pin SPLD, particularly when the installed part has failed and the board layout cannot be changed. The same 20-SOIC footprint simplifies mechanical replacement, while flash-retained configuration allows the replacement to be programmed with the original logic file. Before ordering, verify that the substitute has the same pin behavior, power-down function, I/O configuration, and timing class. A 15 ns commercial-grade variant preserves the stated speed but may not meet the original industrial temperature requirement; faster or slower family options require explicit timing review. Preserve the original programming documentation and verify the complete board after replacement.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ATF16LV8C-15SI — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ATF16LV8C-15SU | ATF16LV8C-20SI | ATF16LV8C-20SU | ATF16LV8C-10SI | ATF16LV8C-10SU |
|---|---|---|---|---|---|---|
| Package | 20-SOIC | 20-SOIC - same | 20-SOIC - same | 20-SOIC - same | 20-SOIC - same | 20-SOIC - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Pin-to-Pin Delay | 15 ns | 15 ns | 20 ns | 20 ns | 10 ns | 10 ns |
| Macrocells | 8 macrocells | 8 macrocells | 8 macrocells | 8 macrocells | 8 macrocells | 8 macrocells |
| Output Count | 8 outputs | 8 outputs | 8 outputs | 8 outputs | 8 outputs | 8 outputs |
| Equivalent Gate Capacity | 250 gates | 250 gates | 250 gates | 250 gates | 250 gates | 250 gates |
| Temperature-Grade Suffix | SI - industrial grade | SU - commercial grade | SI - industrial grade | SU - commercial grade | SI - industrial grade | SU - commercial grade |
| Power-Down Current | 5 uA maximum | 5 uA maximum | 5 uA maximum | 5 uA maximum | 5 uA maximum | 5 uA maximum |
| Configuration Memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory |
| Supply Voltage | 3 V | 3 V | 3 V | 3 V | 3 V | 3 V |
Principais diferenciais
- Matches the 15 ns speed of the target without changing propagation-delay class (vs ATF16LV8C-20SI)
- Preserves the industrial temperature-grade suffix for industrial maintenance designs (vs ATF16LV8C-15SU)
- Provides additional timing margin for control paths without changing the family architecture (vs ATF16LV8C-10SI)
Notas de projeto
Do not treat the 15 ns pin-to-pin specification as a complete timing guarantee. Build the worst-case path from input through the selected macrocell mode to the output receiver, including setup, hold, skew, rise and fall time, and external load. The ATF16LV8C family supports three operating modes, so confirm the programmed mode and its associated timing characteristics. For replacement parts, repeat the timing calculation rather than assuming that a 20 ns variant satisfies the original design.
Use the pin-controlled power-down input to place the ATF16LV8C-15SI into its specified low-current state when the surrounding system can remain inactive. The family provides a maximum power-down current of 5 uA and typical standby current of 100 nA. Verify the state of every I/O during power-down, because a low-current operating state does not by itself guarantee a safe external logic level. Include quiescent and transition current in the complete system power budget.
Follow the manufacturer package drawing for the 20-SOIC footprint and keep analog or programming-related traces away from switching nodes and fast external edges. Place the required power-supply decoupling close to the supply pins with a short return path to the ground reference. Legacy PLD boards may contain long parallel traces or shared buses; inspect signal integrity at the intended operating speed, especially when substituting a 10 ns family option for the 15 ns target.
Informações de conformidade
The ATF16LV8C-15SI is an industrial-grade ordering code, not an AEC-Q100 automotive-qualified variant. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements were not identified for this exact MPN.