Microchip Technology

ATF16LV8C-15SI - 15ns 8-Macrocell EECMOS PLD | Microchip

部品番号: ATF16LV8C-15SI ✓ 生産中
3 V Vdss 5 uA maximum Id 20-SOIC, 20 pins Package
MOQ: 1 |

ATF16LV8C-15SI 概要

The Microchip Technology ATF16LV8C-15SI is a 15 ns EECMOS simple programmable logic device with eight macrocells, eight outputs, 250 equivalent gates, and eight product terms per output in a 20-pin SOIC package. It uses electrically erasable flash memory for configuration and operates from a 3 V supply, combining deterministic combinational logic with programmable I/O characteristics.

A simple programmable logic device, or SPLD, is a semiconductor between fixed logic and a field-programmable gate array. An SPLD combines AND-array logic, OR-array distribution, registered or combinational outputs, and programmable input/output behavior into one integrated circuit. This architecture makes SPLDs useful for compact glue logic, control sequencing, protocol adaptation, and legacy designs that need reliable nonvolatile configuration without a large FPGA.

The ATF16LV8C architecture supports three operating modes selected automatically by software. Eight outputs each receive eight product terms, enabling complex combinational functions in a compact device. Its 15 ns maximum pin-to-pin delay supports moderate-speed control logic, while the ATF16LV8C family covers speeds down to 10 ns. The device also provides pin-controlled power-down with a maximum 5 uA current and a typical 100 nA standby current, useful for reducing system power when logic activity is not required.

Flash-based configuration retains the programmed logic without a separate programmer after initial programming. This simplifies field updates and avoids volatile configuration loss. CMOS- and TTL-compatible inputs and outputs support integration with conventional digital logic families. The 20-SOIC package, measuring 0.295 inch by 7.50 mm, is also suitable for legacy industrial and commercial control boards that use through-hole-style SOIC footprints.

Typical uses include industrial control interfaces, legacy peripheral adapters, programmable I/O decoding, alarm and sequencing logic, and compact embedded systems that retain existing PLD-based architectures. ATF16LV8C devices can emulate many 20-pin PAL devices and most 20-pin combinatorial PLDs, making them useful when consolidating several small fixed-logic devices onto one configurable IC.

When designing around this device, verify the complete 20-pin interface, programming voltage, timing, and I/O behavior against the manufacturer datasheet before committing the PCB layout. Provide suitable decoupling at the supply pins and preserve the pin-controlled power-down function in low-power designs. Legacy PLD replacement also requires confirming that the programmed function, pin states, and board-level signal timing remain unchanged.

This product page combines the manufacturer specifications, package information, interface constraints, application guidance, and same-family replacement analysis. It also highlights where speed or temperature-grade differences must be checked before treating an alternative as a production drop-in replacement.

ドロップイン代替品: ATF16LV8C-15SI — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

ATF16LV8C-15SU

✅ ドロップイン ⚠️ 仕様未検証
📦 20-SOIC
Same 15 ns speed and 20-SOIC footprint with 0 ns speed difference; commercial temperature grade replaces industrial grade.

📋 参考代替品(カタログ未掲載)

ATF16LV8C-20SI

✅ ドロップイン ⚠️ 仕様未検証
📦 20-SOIC
Same 20-SOIC footprint and industrial temperature grade; 20 ns delay is 5 ns or 33.3% slower than 15 ns.

📋 参考代替品(カタログ未掲載)

ATF16LV8C-20SU

✅ ドロップイン ⚠️ 仕様未検証
📦 20-SOIC
Same 20-SOIC footprint with 20 ns delay, 33.3% slower; commercial temperature grade replaces industrial grade.

📋 参考代替品(カタログ未掲載)

ATF16LV8C-10SI

✅ ドロップイン ⚠️ 仕様未検証
Microchip Technology
📦 20-SOIC
16V8 electrically erasable programmable logic device (EECMOS PLD) · 8 macrocells · 10 ns · EECMOS with electrically erasable flash-memory technology · 8 outputs, each allocated 8 product terms · CMOS and TTL compatible · CMOS and TTL compatible · Pin-controlled, 5 uA maximum

価格はお問い合わせください

データシートを見る →

ATF16LV8C-10SU

✅ ドロップイン ⚠️ 仕様未検証
📦 20-SOIC
Same 20-SOIC footprint with 10 ns delay, 33.3% faster; commercial temperature grade replaces industrial grade.

📋 参考代替品(カタログ未掲載)

ATF16LV8C-15SI 最大定格&電気的特性

Programmable Logic Technology EECMOS with electrically erasable flash configuration memory
Device Architecture Simple programmable logic device (SPLD)
Macrocell Count 8 macrocells
Output Count 8 outputs
Product Terms per Output 8 product terms per output
Equivalent Gate Capacity 250 gates
Maximum Pin-to-Pin Delay 15 ns
ATF16LV8C Family Minimum Delay 10 ns
電源電圧 3 V
Power-Down Current 5 uA maximum
Standby Current 100 nA typical
パッケージ 20-SOIC, 20 pins
Package Width 7.50 mm
Package Body Length 0.295 inch
実装タイプ Surface-mount SOIC
Input Compatibility CMOS and TTL compatible
RoHS ステータス unknown

ATF16LV8C-15SI 0.295 inch ピン配置ガイド

ATF16LV8C-15SI (0.295 inch パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

ATF16LV8C-15SI の 0.295 inch パッケージピン配置図

詳細なピン配置データはありません: ATF16LV8C-15SI.

詳細は データシート をご参照ください。

主な用途

ATF16LV8C-15SI の用途: 6 件s: Industrial Control and Sequencing, Programmable I/O and Bus Decoding, Legacy Peripheral Interface Consolidation, Alarm and Interlock Logic, Low-Power Embedded Control, Product Maintenance and Legacy Board Repair.

🏭

Industrial Control and Sequencing

The ATF16LV8C-15SI fits compact industrial control logic that coordinates discrete sensors, actuators, interlocks, and operating sequences. Its eight macrocells can implement multiple combinational or registered functions without consuming several separate generic logic devices, while the 15 ns pin-to-pin delay supports moderate-speed control paths. Flash-retained configuration preserves the programmed machine logic through power cycles, reducing the need for repeated in-field programming. Place the device in a 20-SOIC footprint with the supply and interface networks required by the ATF16LV8C family datasheet. The primary design check is timing margin: retain ATF16LV8C-15SI when 15 ns satisfies every worst-case path, or evaluate a 10 ns family option when greater propagation margin is beneficial without changing the board.

🔧

Programmable I/O and Bus Decoding

ATF16LV8C-15SI is appropriate for address decoding, peripheral selection, interrupt qualification, and programmable I/O behavior in legacy embedded systems. Eight outputs and eight product terms per output provide enough logic density to consolidate small decoding networks while retaining a straightforward 20-pin interface. The 15 ns maximum pin-to-pin delay should be checked against the system clock period and any external receiver requirements before layout is released. Because the device uses flash-retained configuration, engineers can update control decoding without adding volatile memory or a separate configuration reset mechanism. The same footprint also permits planned speed-grade substitutions during legacy-product maintenance, provided the selected suffix satisfies both timing and environmental requirements.

🖥️

Legacy Peripheral Interface Consolidation

The ATF16LV8C-15SI can consolidate several small PAL or combinatorial PLD functions into one configurable device, making it useful when maintaining older peripheral-control boards. According to the manufacturer documentation, its architecture can emulate many 20-pin PAL devices and most 20-pin combinatorial PLDs, while three software-selected operating modes support different logic organizations. Consolidation reduces board area and the number of separate programming files, but each original function must be translated and verified against the new input, output, polarity, and registered-output behavior. The 250-equivalent-gate capacity and eight macrocells make this approach most practical for several small logic islands rather than a large state machine. Validate the converted design with system-level vectors before production release.

⚡

Alarm and Interlock Logic

ATF16LV8C-15SI is suitable for alarm aggregation, safety-interlock decoding, fault latching, and warning-signal generation in compact equipment. The eight programmable outputs can combine multiple sensor conditions and generate status signals without duplicating gates across separate logic packages, while flash configuration keeps the safety-related logic definition stable across restarts. Design the circuit so that power-down and output states during configuration or reset are compatible with the equipment's safe-state requirements. The 15 ns delay is appropriate for most qualification, debounce, and annunciation paths, but it must be included in the worst-case response calculation from sensor event to alarm output. Confirm all input thresholds and output timing in the manufacturer datasheet before using the device as part of an interlock chain.

🔋

Low-Power Embedded Control

The ATF16LV8C-15SI can implement standby, wake, routing, and supervisory functions in embedded systems that periodically disable unused logic. Its pin-controlled power-down mode supports a maximum 5 uA current, while typical standby current is 100 nA, helping reduce consumption when the associated processor or peripheral is inactive. Because the configuration remains in electrically erasable flash memory, the logic does not need to be reloaded after each power cycle. The design should define which pins force power-down, which signals remain valid in that state, and how the device returns to normal operation. Include the selected family variant's timing and temperature requirements in the power-budget and reliability calculations to ensure that the low-power mode functions correctly across the intended operating environment.

🔧

Product Maintenance and Legacy Board Repair

ATF16LV8C-15SI is useful for maintaining legacy boards that originally used an ATF16LV8C-compatible 20-pin SPLD, particularly when the installed part has failed and the board layout cannot be changed. The same 20-SOIC footprint simplifies mechanical replacement, while flash-retained configuration allows the replacement to be programmed with the original logic file. Before ordering, verify that the substitute has the same pin behavior, power-down function, I/O configuration, and timing class. A 15 ns commercial-grade variant preserves the stated speed but may not meet the original industrial temperature requirement; faster or slower family options require explicit timing review. Preserve the original programming documentation and verify the complete board after replacement.

おすすめ製品の概要

ATF16LV8C-10SI Microchip Technology 使用用途: Industrial Control and Sequencing, Programmable I/O and Bus Decoding, Alarm and Interlock Logic, Low-Power Embedded Control, Product Maintenance and Legacy Board Repair ATF16LV8C-15SU Same-speed commercial temperature option 使用用途: Industrial Control and Sequencing, Legacy Peripheral Interface Consolidation, Low-Power Embedded Control, Product Maintenance and Legacy Board Repair ATF16LV8C-20SI Same-footprint lower-speed timing option 使用用途: Programmable I/O and Bus Decoding, Alarm and Interlock Logic, Product Maintenance and Legacy Board Repair ATF16LV8C-10SU Higher-speed consolidation option 使用用途: Legacy Peripheral Interface Consolidation
What is ATF16LV8C-15SI?
The ATF16LV8C-15SI is a Microchip Technology 8-macrocell simple programmable logic device with a 15 ns maximum pin-to-pin delay and flash-retained configuration. According to the manufacturer datasheet, it provides 250 equivalent gates, eight outputs with eight product terms each, and three automatically selected operating modes. It is packaged in a 20-pin SOIC and is intended for compact programmable control, decoding, and legacy logic replacement designs.
What are the key specifications of ATF16LV8C-15SI that engineers should know?
The key ATF16LV8C-15SI specifications are eight macrocells, eight outputs, 250 equivalent gates, a 15 ns maximum pin-to-pin delay, and operation from 3 V in a 20-SOIC package. According to the Microchip ATF16LV8C datasheet, each output receives eight product terms, configuration is stored in electrically erasable flash memory, and pin-controlled power-down can reduce current to 5 uA maximum.
Where can I download the ATF16LV8C-15SI datasheet PDF?
The ATF16LV8C-15SI datasheet PDF can be downloaded from the Microchip product documentation linked on the official ATF16LV8C product page. The manufacturer datasheet is the controlling document for the complete pin description, programming procedure, timing tables, electrical characteristics, and package drawings. Use the ATF16LV8C family datasheet because ATF16LV8C-15SI is a speed- and temperature-specific ordering code within that device family.
Where can I find the ATF16LV8C-15SI pinout?
The ATF16LV8C-15SI pinout is defined by the pin-description table and package drawing in the manufacturer datasheet. The device uses a 20-SOIC package with 20 physical pins, but its exact signal assignments must be checked against the documented programming model and package drawing. Use those tables when assigning PCB tracks or designing a board that replaces an existing 20-pin SPLD.
Is ATF16LV8C-15SI suitable for industrial control logic?
The ATF16LV8C-15SI is suitable for industrial control logic when its specified operating temperature, input levels, output timing, and power requirements satisfy the end equipment. According to the Microchip product information, the device is a 15 ns EECMOS SPLD with flash-retained configuration and a 20-SOIC package. The exact numeric temperature limits must be taken from the family datasheet for the ATF16LV8C-15SI ordering code.
How much power does the ATF16LV8C-15SI consume?
The ATF16LV8C-15SI is designed for low-power logic operation, with a maximum pin-controlled power-down current of 5 uA and typical standby current of 100 nA. According to the Microchip ATF16LV8C datasheet, normal operating consumption depends on supply voltage, switching activity, configuration, and I/O loading. The low-power figures are most useful when the design can disable the PLD during idle periods.
What is the difference between ATF16LV8C-15SI and ATF16LV8C-10SU?
The primary functional difference is propagation speed: ATF16LV8C-15SI is specified at 15 ns, while ATF16LV8C-10SU is specified at 10 ns, a 33.3% reduction in stated maximum pin-to-pin delay. Both belong to the ATF16LV8C architecture and use the 20-SOIC package, but their ordering codes also indicate different temperature grades. Confirm the exact ordering-code limits before using either part in a new design.
What can replace ATF16LV8C-15SI?
The closest same-footprint replacement candidates are other ATF16LV8C 20-SOIC speed variants, including ATF16LV8C-15SU, ATF16LV8C-20SI, ATF16LV8C-20SU, ATF16LV8C-10SI, and ATF16LV8C-10SU. Their key differences are speed and temperature grade, so a candidate is only a functional drop-in when timing limits, temperature requirements, programmed configuration, and pin behavior match the original design.
Is ATF16LV8C-15SI the same as ATF16LV8C-15SU?
No, the ATF16LV8C-15SI and ATF16LV8C-15SU share the same 15 ns speed designation and 20-SOIC footprint, but their temperature-grade suffixes differ. The SI ordering code identifies the industrial-grade option, while SU identifies the commercial-grade option. They can share a PCB footprint, but a drop-in substitution still requires checking the permitted system temperature against the numeric limits in the manufacturer datasheet.
What is the best Microchip equivalent for ATF16LV8C-15SI?
The most direct Microchip family choice is another ATF16LV8C speed variant in the same 20-SOIC package, with ATF16LV8C-15SU offering identical 15 ns speed but a different temperature grade. ATF16LV8C-10SI or ATF16LV8C-10SU provides 10 ns speed, while the 20 ns variants provide slower timing. Select the exact suffix only after checking temperature range, timing margin, and supply requirements.
What is the best cross-brand equivalent for ATF16LV8C-15SI?
No cross-brand drop-in equivalent for ATF16LV8C-15SI is established by the available cross-reference results. The ATF16LV8C is a legacy EECMOS SPLD with a device-specific 20-pin interface, and an equivalent part must match that footprint, logic architecture, programming method, I/O behavior, and timing. Use the manufacturer cross-reference search for an initial comparison, then require schematic, timing, and programming validation before approving another manufacturer's device.
When should I choose ATF16LV8C-15SI over a 10 ns ATF16LV8C variant?
Choose ATF16LV8C-15SI when its 15 ns timing specification meets the design margin and a longer-life 20-SOIC PLD is preferred over a faster family option. A 10 ns ATF16LV8C variant provides 5 ns less stated propagation delay and may be preferable for tighter timing paths, but it does not automatically improve every application. Confirm operating temperature, supply voltage, programmed configuration, and availability before changing the selected speed grade.
Can ATF16LV8C-20SI replace ATF16LV8C-15SI?
The ATF16LV8C-20SI can serve as a footprint-compatible candidate for ATF16LV8C-15SI, but its stated 20 ns pin-to-pin delay is 5 ns, or 33.3%, slower than the 15 ns target. According to the ATF16LV8C family information, both use the same 20-SOIC architecture and industrial suffix. Replacement is appropriate only when the slower timing still satisfies every setup, hold, propagation, and system-level timing requirement.
Where can I buy ATF16LV8C-15SI online?
Use the Request a Quote form on this page to request ATF16LV8C-15SI availability, current lead time, and commercial terms. The exact MPN is listed with inventory by an authorized channel, but stock levels can change rapidly and may not correspond to every package or order quantity. Include your target quantity, required shipment date, and whether reel, tray, or other approved packaging is needed.
What is the price of ATF16LV8C-15SI?
The current ATF16LV8C-15SI price depends on order quantity, packaging, lead time, and current channel availability. Submit the required quantity and target date through the Request a Quote form on this page for a current quotation. The form is the appropriate route for price confirmation because market pricing and inventory can change between inquiries, especially for this legacy programmable-logic device.
What is the lead time for ATF16LV8C-15SI?
The current ATF16LV8C-15SI lead time must be confirmed for the requested quantity through the Request a Quote form on this page. One channel listing shows an estimated delivery window, but that indication is not a guaranteed allocation and should not be treated as a fixed factory lead time. Include your required delivery date and acceptable packaging so the quotation can reflect the actual channel position.

エンジニアリング参考データ: ATF16LV8C-15SI — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose ATF16LV8C-15SI for a new or replacement 20-SOIC design that specifically requires the 15 ns speed grade and industrial temperature ordering code. Select ATF16LV8C-15SU when the same 15 ns timing is needed but the equipment's environmental range falls within the commercial-grade limits. ATF16LV8C-10SI or ATF16LV8C-10SU can provide 5 ns less propagation delay for tighter control paths, while retaining the same family architecture and footprint. ATF16LV8C-20SI or ATF16LV8C-20SU are only appropriate when 20 ns still leaves adequate timing margin. For every alternative, verify the 20-pin interface, supply requirements, programmed macrocell mode, I/O behavior, temperature limits, and original logic file before approving a drop-in replacement.

代替品との比較

パラメータ この製品 ATF16LV8C-15SU ATF16LV8C-20SI ATF16LV8C-20SU ATF16LV8C-10SI ATF16LV8C-10SU
Package 20-SOIC 20-SOIC - same 20-SOIC - same 20-SOIC - same 20-SOIC - same 20-SOIC - same
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Maximum Pin-to-Pin Delay 15 ns 15 ns 20 ns 20 ns 10 ns 10 ns
Macrocells 8 macrocells 8 macrocells 8 macrocells 8 macrocells 8 macrocells 8 macrocells
Output Count 8 outputs 8 outputs 8 outputs 8 outputs 8 outputs 8 outputs
Equivalent Gate Capacity 250 gates 250 gates 250 gates 250 gates 250 gates 250 gates
Temperature-Grade Suffix SI - industrial grade SU - commercial grade SI - industrial grade SU - commercial grade SI - industrial grade SU - commercial grade
Power-Down Current 5 uA maximum 5 uA maximum 5 uA maximum 5 uA maximum 5 uA maximum 5 uA maximum
Configuration Memory Electrically erasable flash memory Electrically erasable flash memory Electrically erasable flash memory Electrically erasable flash memory Electrically erasable flash memory Electrically erasable flash memory
Supply Voltage 3 V 3 V 3 V 3 V 3 V 3 V

主な差別化要因

  • Matches the 15 ns speed of the target without changing propagation-delay class (vs ATF16LV8C-20SI)
  • Preserves the industrial temperature-grade suffix for industrial maintenance designs (vs ATF16LV8C-15SU)
  • Provides additional timing margin for control paths without changing the family architecture (vs ATF16LV8C-10SI)

設計ノート

Do not treat the 15 ns pin-to-pin specification as a complete timing guarantee. Build the worst-case path from input through the selected macrocell mode to the output receiver, including setup, hold, skew, rise and fall time, and external load. The ATF16LV8C family supports three operating modes, so confirm the programmed mode and its associated timing characteristics. For replacement parts, repeat the timing calculation rather than assuming that a 20 ns variant satisfies the original design.

Use the pin-controlled power-down input to place the ATF16LV8C-15SI into its specified low-current state when the surrounding system can remain inactive. The family provides a maximum power-down current of 5 uA and typical standby current of 100 nA. Verify the state of every I/O during power-down, because a low-current operating state does not by itself guarantee a safe external logic level. Include quiescent and transition current in the complete system power budget.

Follow the manufacturer package drawing for the 20-SOIC footprint and keep analog or programming-related traces away from switching nodes and fast external edges. Place the required power-supply decoupling close to the supply pins with a short return path to the ground reference. Legacy PLD boards may contain long parallel traces or shared buses; inspect signal integrity at the intended operating speed, especially when substituting a 10 ns family option for the 15 ns target.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The ATF16LV8C-15SI is an industrial-grade ordering code, not an AEC-Q100 automotive-qualified variant. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements were not identified for this exact MPN.

データ検証日: 2026-11-11 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

ATF16LV8C-15SI datasheet ATF16LV8C-15SI pinout ATF16LV8C-15SI datasheet pdf ATF16LV8C-15SI equivalent ATF16LV8C-15SI replacement ATF16LV8C-15SI price ATF16LV8C-15SI stock Microchip ATF16LV8C-15SI ATF16LV8C-15SI 20-SOIC ATF16LV8C-15SI vs ATF16LV8C-10SI ATF16LV8C 8 macrocell PLD ATF16LV8C-15SI industrial control logic

関連部品&用語

Microchip Technology ATF16LV8C-15SI ATF16LV8C-15SU ATF16LV8C-20SI ATF16LV8C-20SU ATF16LV8C-10SI ATF16LV8C-10SU ATF16LV8C Simple Programmable Logic Device SPLD EECMOS electrically erasable flash memory programmable logic device logic IC semiconductor macrocell combinational logic registered output programmable I/O 20-SOIC SOIC package family surface mount SMD CMOS TTL pin-to-pin delay power-down mode industrial temperature grade commercial temperature grade RoHS REACH
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示