ATMEGA16-16PC - 8-bit AVR MCU 16MHz 16KB Flash DIP-40 | Microchip
N.º da peça: ATMEGA16-16PC ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $6.9 | $6,90 |
| 10 | $6.21 | $62,10 |
| 100 | $5.52 | $552,00 |
| 500 | $4.97 | $2.485,00 |
| 1.000 | $4.48 | $4.480,00 |
ATMEGA16-16PC Visão geral
An 8-bit microcontroller is an integrated circuit that combines a processor core, program memory, data memory, and peripherals on a single chip. The ATmega16 belongs to the AVR ATmega family, which sits within the broader hierarchy of microcontrollers, embedded processors, and semiconductors. The AVR core executes most of its 131 powerful instructions in a single clock cycle, using 32 general-purpose working registers directly connected to the ALU for high code efficiency.
Key features include 16KB self-programming Flash with true read-while-write operation, a 10-bit successive-approximation ADC with an internal 2.56V reference option, four PWM channels via 8-bit Timer/Counter0, 16-bit Timer/Counter1, and Timer/Counter2, plus USART, SPI, and TWI (I2C) serial interfaces. The JTAG boundary-scan capability supports IEEE 1149.1-compliant test access and on-chip-debug.
Architecturally, the ATmega16 uses a Harvard structure with separate program and data buses. Boot-section Flash enables in-system reprogramming, while three sleep modes (Idle, ADC Noise Reduction, Power-down) plus extended standby options support low-power designs.
Typical applications include industrial control panels, hobby and education boards, sensor interfaces, and legacy equipment maintenance, where the through-hole DIP-40 package simplifies prototyping and socketed replacement.
A key design consideration: the PDIP package lacks an exposed thermal pad, but at 16 MHz and 5V the power dissipation is modest; always decouple VCC and AVCC with 0.1uF ceramics.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Alternativas drop-in para ATMEGA16-16PC — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com ATMEGA16-16PC (mesmo formato e footprint) — diferindo em Operating Temperature, Communication Interfaces, Timers, Package, Flash Program Memory.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
ATMEGA16-16PU
✅ Drop-In✓ Em estoque
$3.88 / unidade
Ver ficha técnica →ATMEGA32-16PC
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
Consulte o preço
Ver ficha técnica →ATMEGA162-16PC
✅ Drop-In✓ Em estoque
$1.95 / unidade
Ver ficha técnica →ATMEGA8515-16PC
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$4.1 / unidade
Ver ficha técnica →ATMEGA16-16PC
✅ Drop-In✓ Em estoque
$4.48 / unidade
Ver ficha técnica →ATMEGA16-16PC Classificações máximas e características elétricas
| Core Processor | AVR |
| Core Size | 8-bit |
| Max Clock Frequency | 16 MHz |
| Throughput | Up to 16 MIPS at 16 MHz |
| Flash Program Memory | 16 KB (8K x 16) |
| SRAM | 1 KB |
| EEPROM | 512 B |
| Instructions | 131 powerful instructions, mostly single-cycle |
| ADC | 8-channel, 10-bit |
| Connectivity | I2C (TWI), SPI, UART/USART |
| Timers | One 8-bit, one 16-bit, one 8-bit RTC-capable; 4 PWM channels |
| JTAG Interface | On-chip debug and boundary scan |
| Supply Voltage (VCC) | 4.5 V to 5.5 V (16P speed grade) |
| Temperatura de operação | -40C to +85C (industrial) |
| Encapsulamento | 40-PDIP (0.600 in, 15.24 mm) |
| Tipo de montagem | Through Hole |
| Sleep Modes | Idle, ADC Noise Reduction, Power-down, Power-save, Standby, Extended Standby |
| Product Status | Obsolete (per Octopart distributor data) |
Configuração de pinos do ATMEGA16-16PC
| Pino 1 | PB0 (XCK/T0) — Port B bit 0; USART external clock / Timer0 clock input |
| Pino 2 | PB1 (T1) — Port B bit 1; Timer1 external counter input |
| Pino 3 | PB2 (AIN0/INT2) — Port B bit 2; analog comparator positive input / external interrupt 2 |
| Pino 4 | PB3 (AIN1/OC0) — Port B bit 3; comparator negative input / Timer0 PWM output |
| Pino 5 | PB4 (SS) — Port B bit 4; SPI slave select |
| Pino 6 | PB5 (MOSI) — Port B bit 5; SPI Master Output / Slave Input; ISP programming |
| Pino 7 | PB6 (MISO) — Port B bit 6; SPI Master Input / Slave Output; ISP programming |
| Pino 8 | PB7 (SCK/OC2) — Port B bit 7; SPI clock; Timer2 PWM output |
| Pino 9 | RESET — Active-low reset input (with internal pull-up); ISP programming voltage sense |
| Pino 10 | VCC — Digital supply voltage (4.5 V to 5.5 V) |
| Pino 11 | GND — Ground |
| Pino 12 | XTAL2 — Inverting oscillator amplifier output |
| Pino 13 | XTAL1 — Inverting oscillator amplifier input / external clock input |
| Pino 14 | PD0 (RXD) — Port D bit 0; USART receive data |
| Pino 15 | PD1 (TXD) — Port D bit 1; USART transmit data |
| Pino 16 | PD2 (INT0) — Port D bit 2; external interrupt 0 |
| Pino 17 | PD3 (INT1) — Port D bit 3; external interrupt 1 |
| Pino 18 | PD4 (OC1B) — Port D bit 4; Timer/Counter1 output compare B / PWM output |
| Pino 19 | PD5 (OC1A) — Port D bit 5; Timer/Counter1 output compare A / PWM output |
| Pino 20 | PD6 (ICP1) — Port D bit 6; Timer/Counter1 input capture |
| Pino 21 | PD7 (OC2) — Port D bit 7; Timer/Counter2 output compare / PWM output |
| Pino 22 | PC0 (SCL) — Port C bit 0; TWI clock line |
| Pino 23 | PC1 (SDA) — Port C bit 1; TWI data line |
| Pino 24 | PC2 (TCK) — Port C bit 2; JTAG test clock |
| Pino 25 | PC3 (TMS) — Port C bit 3; JTAG test mode select |
| Pino 26 | PC4 (TDO) — Port C bit 4; JTAG test data out / Timer0 clock via alternate function |
| Pino 27 | PC5 (TDI) — Port C bit 5; JTAG test data in |
| Pino 28 | PC6 (TOSC1) — Port C bit 6; Timer2 oscillator input (32.768 kHz watch crystal) |
| Pino 29 | PC7 (TOSC2) — Port C bit 7; Timer2 oscillator output |
| Pino 30 | AVCC — ADC supply voltage; connect to VCC via low-pass filter |
| Pino 31 | GND — Ground (ADC ground reference) |
| Pino 32 | AREF — ADC analog reference voltage |
| Pino 33 | PA0 (ADC0) — Port A bit 0; ADC channel 0 |
| Pino 34 | PA1 (ADC1) — Port A bit 1; ADC channel 1 |
| Pino 35 | PA2 (ADC2) — Port A bit 2; ADC channel 2 |
| Pino 36 | PA3 (ADC3) — Port A bit 3; ADC channel 3 |
| Pino 37 | PA4 (ADC4) — Port A bit 4; ADC channel 4 |
| Pino 38 | PA5 (ADC5) — Port A bit 5; ADC channel 5 |
| Pino 39 | PA6 (ADC6) — Port A bit 6; ADC channel 6 |
| Pino 40 | PA7 (ADC7) — Port A bit 7; ADC channel 7 |
Aplicações típicas
ATMEGA16-16PC é adequado para 6 aplicaçãos: Industrial Control Panels, Education and Prototyping Boards, Legacy Equipment Maintenance and Repair, Sensor Acquisition Systems, Embedded Serial Communication Nodes, Motor and PWM Control.
Industrial Control Panels
The ATMEGA16-16PC suits industrial control panels because it combines 16 MIPS of throughput at 16 MHz with hardware USART, SPI, and TWI interfaces for communicating with PLC-adjacent peripherals, drives, and HMI boards. Four PWM channels from its 8-bit and 16-bit timers control actuators and dimming loads, while brown-out detection and the Power-save sleep mode improve robustness and standby consumption. The through-hole 40-PDIP package sockets directly into industrial motherboards, simplifying field replacement of the controller without desoldering. Its 10-bit, 8-channel ADC digitizes sensor inputs such as potentiometers and temperature dividers with the internal 2.56V reference. Because the part is obsolete, new panel designs should specify the pin-compatible ATMEGA32-16PC and retain socket compatibility for a clean migration path.
Recomendado
Education and Prototyping Boards
Universities and makers have long used the ATmega16 on breadboards because the 40-PDIP (0.600 in) package plugs directly into standard sockets and breadboards without adapters. At 16 MHz it executes most of its 131 AVR instructions in one cycle, providing predictable assembly-level timing labs, while the JTAG interface on PORTC (pins 22-29) allows step-by-step on-chip debugging with Atmel-ICE - a capability many larger Arduinos lack. The 8-channel 10-bit ADC supports analog sensor experiments, and hardware USART/SPI/TWI cover serial-bus coursework. Programming requires only a low-cost USBasp or AVRISP mkII over SPI. Students should note the 4.5V-5.5V supply requirement and the external 16 MHz crystal on XTAL1/XTAL2 (pins 12-13) with 12-22 pF load capacitors.
Recomendado
Legacy Equipment Maintenance and Repair
Service technicians repairing 2000s-era equipment - CNC controllers, test fixtures, UPS boards, and instrumentation - frequently encounter ATMEGA16-16PC in socketed DIP-40 locations. Because the device is obsolete, the practical repair strategy is: first, extract and archive the Flash/EEPROM contents from a healthy unit via ISP or JTAG; second, source remaining distributor stock or drop in a pin-compatible part. ATMEGA16-16PU is binary-identical with a Pb-free finish, and ATMEGA32-16PC doubles Flash with the same pinout. Fuse-bit settings (clock source, JTAGEN, BOD level) must be replicated exactly, or the replacement will not start. Keeping a programmed spare socketed reduces downtime, since the 5V through-hole design tolerates gentle field handling.
Recomendado
Sensor Acquisition Systems
With its 8-channel, 10-bit successive-approximation ADC, the ATMEGA16-16PC consolidates up to eight analog inputs - temperature, pressure, light, and potentiometer signals - into one 5V controller. The ADC supports an internal 2.56V reference selected by the REFS bits, or an external reference on AREF (pin 32), and 2x/10x gain via the amplifier stage for small signals. The ADC Noise Reduction sleep mode suppresses digital switching during conversions, improving effective resolution. Sample rates reach roughly 15 kSPS at full 10-bit resolution with a prescaler of 128 at 16 MHz. Digitized data streams out through the hardware USART at up to 115.2 kbps or via SPI for higher rates. AVCC (pin 30) should be filtered through an LC network for best accuracy.
Recomendado
Embedded Serial Communication Nodes
The hardware USART (PD0 RXD, PD1 TXD), SPI (PB4-PB7), and TWI (PC0 SCL, PC1 SDA) make the ATMEGA16-16PC a solid serial protocol node in multi-board systems. Typical roles include RS-485/RS-232 field translators, SPI intermediaries for SD cards and displays, and TWI bus masters coordinating I2C RTCs and EEPROMs. At 16 MHz the USART supports up to 115.2 kbps with standard UBRR divisors and low error rates. The USART supports multiprocessor communication mode and nine-bit framing for addressable networks. Because Flash is self-programming with a boot section, firmware updates can be delivered in-field over the serial link using a small bootloader - valuable for deployed nodes in inaccessible locations such as building panels or vending equipment.
Recomendado
Motor and PWM Control
Four hardware PWM outputs - OC0 (PB3), OC1A (PD5), OC1B (PD4), and OC2 (PD7) - let the ATMEGA16-16PC drive DC motor drivers, LED dimmers, and heater elements without software bit-banging. The 16-bit Timer/Counter1 provides phase-correct and fast PWM modes with programmable top values, delivering resolutions up to 16 bits at reduced PWM frequency - suitable for fan control or servo positioning. The input-capture unit (ICP1, PD6) timestamps external edges for closed-loop speed measurement from encoder or hall signals. Two external interrupts (INT0/INT1) add responsive stop and limit-switch inputs. Gate drivers such as IR2110-style devices translate the 5V logic PWM to power stages, keeping the MCU isolated from motor noise with proper optocoupling.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ATMEGA16-16PC — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ATMEGA16-16PU | ATMEGA32-16PC | ATMEGA162-16PC | ATMEGA8515-16PC |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 40-PDIP | 40-PDIP - same | 40-PDIP - same | 40-PDIP - same | 40-PDIP - same |
| Max Clock / Speed | 16 MHz (16 MIPS) | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Flash Memory | 16 KB | 16 KB | 32 KB (+100%) | 16 KB | 8 KB (-50%) |
| SRAM | 1 KB | 1 KB | 2 KB | 1 KB | 512 B |
| ADC | 8-channel, 10-bit | 8-channel, 10-bit | 8-channel, 10-bit | No ADC | No ADC |
| USART Count | 1 | 1 | 1 | 2 | 1 |
| Finish / Compliance | Lead finish (legacy, non-RoHS) | Pb-free matte tin (RoHS) | Lead finish (legacy) | Lead finish (legacy) | Lead finish (legacy) |
| Product Status | Obsolete | Obsolete (residual stock) | Obsolete (residual stock) | Obsolete (residual stock) | Obsolete (residual stock) |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
Principais diferenciais
- JTAG on-chip debug and boundary scan (vs ATMEGA8515-16PC)
- Double the Flash at same pinout (vs ATMEGA32-16PC)
- Pb-free availability of the same die (vs ATMEGA16-16PU)
- Dual USART for multi-serial designs (vs ATMEGA162-16PC)
Notas de projeto
Decouple VCC (pin 10) with a 0.1uF ceramic capacitor placed within 5 mm of the pin, plus 4.7uF-10uF bulk near the board supply entry. Filter AVCC (pin 30) through a 10uH inductor or ferrite bead and a 0.1uF capacitor to keep digital noise out of the 10-bit ADC; tie AREF (pin 32) to a clean reference through a 100 nF capacitor when using the internal 2.56V reference. Enable brown-out detection via fuse (typ. 2.7V or 4.0V threshold) to prevent Flash/EEPROM corruption during 5V rail droop. Estimated: at 16 MHz, 5V, and full pin loading, worst-case supply current is roughly 25-30 mA per the datasheet active-current region - modest dissipation of about 150 mW, so no heatsinking is needed.
For the through-hole DIP-40, keep the crystal loop tight: place the 16 MHz crystal and its two 12-22 pF load capacitors directly adjacent to XTAL1 (pin 13) and XTAL2 (pin 12), with short ground returns. Route RESET (pin 9) with a 10k pull-up to VCC even when using the internal pull-up, and bring it to an ISP header (MOSI PB5, MISO PB6, SCK PB7, RESET, VCC, GND) for field reprogramming. Keep the JTAG pins (PC2-PC5) on a header if on-chip debugging is planned; note that JTAGEN is fuse-programmed and PC2-PC5 default to JTAG function, so clear the JTAG fuse if all eight PORTC bits are needed as GPIO.
Three pitfalls recur with this part. First, the PC suffix is the legacy lead-finish variant and is obsolete - substituting the Pb-free ATMEGA16-16PU requires confirming your reflow/wave profile is compatible with matte tin. Second, when replacing with ATMEGA32-16PC, the register map is almost identical but Flash-size-dependent constants and bootloader fuse (BOOTSZ/BOOTRST) settings must be re-verified. Third, PORTC pins default to JTAG on POR; designs that drive LEDs or relays from PC2-PC5 without clearing JTAGEN will show erratic behavior at reset. Always read back fuses after programming and validate a sample board across the -40C to +85C industrial range before release.
Informações de conformidade
The PC suffix denotes the legacy lead-finish process; this exact suffix is marked Obsolete in Octopart distributor data. Use ATMEGA16-16PU (Pb-free) for RoHS-compliant assemblies. Confirm certificates on the Microchip product page for your specific date code.
