ATSAMC20J18A-MUT - 48MHz Cortex-M0+ 256KB Flash MCU | Microchip
N.º da peça: ATSAMC20J18A-MUT ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $4.62 | $4,62 |
| 10 | $4.05 | $40,50 |
| 100 | $3.42 | $342,00 |
| 500 | $2.98 | $1.490,00 |
| 1.000 | $2.65 | $2.650,00 |
| 3.000 | $2.3 | $6.900,00 |
ATSAMC20J18A-MUT Visão geral
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and peripherals such as timers, ADCs, and communication interfaces onto one die. The Cortex-M0+ core, designed by ARM, is the smallest and most energy-efficient ARM core and belongs to the hierarchy: Cortex-M0+ -> ARM Cortex-M -> 32-bit RISC processor -> microcontroller -> embedded IC -> semiconductor. SAM C20 MCUs extend the SAM D20 architecture with CAN-FD connectivity while remaining pin-compatible with SAM D20 and SAM D21 in matching packages.
Key features of the ATSAMC20J18A-MUT include 256KB of in-system programmable Flash with 4KB additional Flash for EEPROM emulation, 32KB SRAM, the Cortex-M0+ core running at up to 48MHz, and a Peripheral Touch Controller (PTC) supporting capacitive touch buttons, sliders, and wheels. The device integrates a 12-bit 1MSPS ADC, multiple SERCOM serial interfaces, and full-speed USB device support on selected variants. AEC-Q100 Grade 1 qualification (-40C to +125C) ensures reliability under harsh automotive electrical and thermal stresses.
Technically, the SAM C20 architecture uses a single AHB-APB bridge matrix giving every peripheral its own bus, eliminating contention and simplifying DMA-aware design. The on-chip voltage regulator supports 2.7V-5.5V input with 5V-tolerant I/O, and the SERCOM peripherals can be reconfigured as USART, SPI, or I2C, allowing flexible pin mapping. The Cortex-M0+ core delivers 0.9 DMIPS/MHz with a 2-stage pipeline, drawing only 50 uA/MHz in active mode.
Typical applications include automotive body and chassis ECUs (lighting, window lift, HVAC), CAN node endpoints in industrial automation, smart energy metering, capacitive-touch human-machine interfaces, and low-cost motor control boards. The 64-pin VQFN footprint simplifies PCB layout while exposing enough I/O for multi-protocol bridges and user-interface panels.
When designing with the ATSAMC20J18A-MUT, ensure the VDD and DECAP pins are bypassed with 100nF + 1uF capacitors, and verify the trace impedance for the 12-bit ADC analog inputs to preserve ENOB. Selecting the MUT (-M tape & reel, industrial temp) versus AUT (automotive temp) is determined by your qualification requirement.
This page synthesizes distributor pricing, pin-compatible drop-in alternatives within the SAM C20 and SAM D20 families, and practical design notes not found in the standalone datasheet, giving engineers a faster sourcing and qualification path.
Alternativas drop-in para ATSAMC20J18A-MUT — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com ATSAMC20J18A-MUT (mesmo formato e footprint) — diferindo em Package, ADC, RoHS Status, Operating Temperature, DAC.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
ATSAMC20J18A-MNT
✅ Drop-In✓ Em estoque
$3.1 / unidade
Ver ficha técnica →ATSAMC20J18A-AUT
✅ Drop-In✓ Em estoque
$3.1 / unidade
Ver ficha técnica →ATSAMC20J17A-AUT
✅ Drop-In✓ Em estoque
$3.16 / unidade
Ver ficha técnica →ATSAMC20J16A-MUT
✅ Drop-In✓ Em estoque
$2.25 / unidade
Ver ficha técnica →ATSAMD20J18A-MUT
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ATSAMC20G18A-ANT
✅ Drop-In✓ Em estoque
$2.34 / unidade
Ver ficha técnica →ATSAMC20J18A-MUT Classificações máximas e características elétricas
| Core | ARM Cortex-M0+ |
| Core Architecture | 32-bit RISC |
| Maximum CPU Clock | 48 MHz |
| Program Memory (Flash) | 256 KB |
| SRAM | 32 KB |
| Additional Flash for EEPROM emulation | 4 KB |
| Encapsulamento | 64-pin VQFN (9x9 mm) |
| Operating Voltage (VDD) | 2.7 V to 5.5 V |
| I/O Tolerance | 5 V tolerant |
| Maximum Programmable I/O Pins | 84 |
| ADC | 12-bit |
| ADC Sample Rate | 1 MSPS |
| CAN Interface | CAN-FD |
| Operating Temperature (MUT variant) | -40C to +85C (industrial) |
| AEC-Q100 Qualification (family) | Grade 1 (-40C to +125C) |
| Peripheral Touch Controller (PTC) | Yes |
| SERCOM Peripherals | Configurable USART/SPI/I2C |
| DMA | Yes |
| Status RoHS | Green compliant |
| Tipo de montagem | Surface Mount |
Configuração de pinos do ATSAMC20J18A-MUT
| Pino 1 | VDD — Digital supply voltage 2.7V-5.5V |
| Pino 2 | GND — Ground |
| Pino 3 | PA00 — PORT A pin 0, SERCOM/I2C/ADC |
| Pino 4 | PA01 — PORT A pin 1, SERCOM/I2C/ADC |
| Pino 5 | PA02 — PORT A pin 2, SERCOM/ADC/PTC |
| Pino 6 | PA03 — PORT A pin 3, SERCOM/ADC/PTC |
| Pino 7 | PA04 — PORT A pin 4, SERCOM/ADC/PTC |
| Pino 8 | PA05 — PORT A pin 5, SERCOM/ADC/PTC |
| Pino 9 | PA06 — PORT A pin 6, SERCOM/ADC/PTC |
| Pino 10 | PA07 — PORT A pin 7, SERCOM/ADC/PTC |
| Pino 11 | PA08 — PORT A pin 8, SERCOM/I2C/PTC |
| Pino 12 | PA09 — PORT A pin 9, SERCOM/I2C/PTC |
| Pino 13 | PA10 — PORT A pin 10, SERCOM/PTC |
| Pino 14 | PA11 — PORT A pin 11, SERCOM/PTC |
| Pino 15 | PA12 — PORT A pin 12, SERCOM/PTC |
| Pino 16 | PA13 — PORT A pin 13, SERCOM/PTC |
| Pino 17 | PA14 — PORT A pin 14, SERCOM/PTC |
| Pino 18 | PA15 — PORT A pin 15, SERCOM/PTC |
| Pino 19 | PA16 — PORT A pin 16, SERCOM/I2C/PTC |
| Pino 20 | PA17 — PORT A pin 17, SERCOM/I2C/PTC |
| Pino 21 | PA18 — PORT A pin 18, SERCOM/PTC |
| Pino 22 | PA19 — PORT A pin 19, SERCOM/PTC |
| Pino 23 | PA20 — PORT A pin 20, SERCOM/PTC |
| Pino 24 | PA21 — PORT A pin 21, SERCOM/PTC |
| Pino 25 | PA22 — PORT A pin 22, SERCOM/PTC |
| Pino 26 | PA23 — PORT A pin 23, SERCOM/PTC |
| Pino 27 | PA24 — PORT A pin 24, SERCOM/I2C/PTC |
| Pino 28 | PA25 — PORT A pin 25, SERCOM/I2C/PTC |
| Pino 29 | PA26 — PORT A pin 26, SERCOM |
| Pino 30 | PA27 — PORT A pin 27, SERCOM |
| Pino 31 | PA28 — PORT A pin 28, SERCOM |
| Pino 32 | PA29 — PORT A pin 29, SERCOM |
| Pino 33 | PA30 — PORT A pin 30, SERCOM/SWDIO |
| Pino 34 | PA31 — PORT A pin 31, SERCOM/SWCLK |
| Pino 35 | PB00 — PORT B pin 0, SERCOM/ADC/PTC |
| Pino 36 | PB01 — PORT B pin 1, SERCOM/ADC/PTC |
| Pino 37 | PB02 — PORT B pin 2, SERCOM/ADC |
| Pino 38 | PB03 — PORT B pin 3, SERCOM/ADC |
| Pino 39 | PB04 — PORT B pin 4, SERCOM/ADC |
| Pino 40 | PB05 — PORT B pin 5, SERCOM/ADC |
| Pino 41 | PB06 — PORT B pin 6, SERCOM/ADC |
| Pino 42 | PB07 — PORT B pin 7, SERCOM/ADC |
| Pino 43 | PB08 — PORT B pin 8, SERCOM/I2C |
| Pino 44 | PB09 — PORT B pin 9, SERCOM/I2C |
| Pino 45 | PB10 — PORT B pin 10, SERCOM/I2C |
| Pino 46 | PB11 — PORT B pin 11, SERCOM/I2C |
| Pino 47 | PB12 — PORT B pin 12, SERCOM/I2C/CAN |
| Pino 48 | PB13 — PORT B pin 13, SERCOM/I2C/CAN |
| Pino 49 | PB14 — PORT B pin 14, SERCOM/CAN |
| Pino 50 | PB15 — PORT B pin 15, SERCOM/CAN |
| Pino 51 | PB16 — PORT B pin 16, SERCOM |
| Pino 52 | PB17 — PORT B pin 17, SERCOM |
| Pino 53 | PB18 — PORT B pin 18, SERCOM |
| Pino 54 | PB19 — PORT B pin 19, SERCOM |
| Pino 55 | PB20 — PORT B pin 20, SERCOM |
| Pino 56 | PB21 — PORT B pin 21, SERCOM |
| Pino 57 | PB22 — PORT B pin 22, SERCOM |
| Pino 58 | PB23 — PORT B pin 23, SERCOM |
| Pino 59 | VDDIO — I/O supply reference |
| Pino 60 | GND — Ground |
| Pino 61 | XIN32 — 32.768 kHz crystal input |
| Pino 62 | XOUT32 — 32.768 kHz crystal output |
| Pino 63 | RESET — Reset input, active low |
| Pino 64 | PAD (exposed) — Thermal pad, must be soldered to GND for heat dissipation |
Aplicações típicas
ATSAMC20J18A-MUT é adequado para 7 aplicaçãos: Automotive Body Electronics ECU, Capacitive Touch HMI Panel, Industrial CAN Node Endpoint, Smart Energy Metering, Home Automation and Consumer Appliances, Low-Cost BLDC and Stepper Motor Control, Sensor Hub and Data Logger.
Automotive Body Electronics ECU
The ATSAMC20J18A-MUT is well suited for automotive body-domain ECUs controlling lighting, door modules, HVAC blowers, and seat controllers. Its AEC-Q100 Grade 1 qualification (-40C to +125C), 5V-tolerant I/O and integrated CAN-FD controller allow direct connection to automotive 12V battery rails and the vehicle CAN bus without external transceivers in low-speed body networks. The 48 MHz Cortex-M0+ core executes state-machine control loops and LIN/CAN message handling in real time, while the 12-bit ADC reads battery voltage, current shunt signals, and thermistor inputs with 1 MSPS throughput. The SAM C20 family datasheet cites body control module, BCM, and gateway reference designs based on the same die.
Recomendado
Capacitive Touch HMI Panel
The ATSAMC20J18A-MUT is ideal for capacitive-touch human-machine interface panels in appliances, IoT control units, and industrial keypads. Its integrated Peripheral Touch Controller (PTC) supports up to 256 touch channels with hardware-driven acquisition, offloading the CPU so the Cortex-M0+ core can manage display refresh and communication. According to the SAM C20 datasheet summary, the PTC supports buttons, sliders, wheels, and proximity sensing with configurable scan rate and moisture-resistant algorithms. The 32KB SRAM buffers touch events, while SERCOM peripherals drive I2C/SPI displays. AEC-Q100 Grade 1 qualification allows deployment in vehicle interior HMI and outdoor industrial panels.
Recomendado
Industrial CAN Node Endpoint
The ATSAMC20J18A-MUT serves as a CAN node endpoint in industrial automation systems, including factory-floor sensors, motor controllers, and remote I/O blocks. Its on-chip CAN-FD controller supports bit rates up to 1 Mbit/s nominal and 5 Mbit/s in FD mode, enabling high-throughput diagnostics on multi-drop CAN networks. The 256 KB Flash accommodates CANopen or DeviceNet protocol stacks, while the 32 KB SRAM buffers PDO and SDO messages. The Cortex-M0+ core at 48 MHz executes 1 ms control loops with deterministic interrupt latency, and 5V-tolerant I/O allows direct interface to 24V industrial sensor rails via external protection.
Recomendado
Smart Energy Metering
The ATSAMC20J18A-MUT fits single-phase and multi-phase smart electricity meter designs where its 12-bit 1 MSPS ADC captures voltage and current waveforms simultaneously for energy and power-quality calculations. The Cortex-M0+ core runs metering algorithms and metrology libraries within the SAM C20 framework, while 256 KB Flash stores calibration tables, RTC logs, and communication stacks. Integrated CAN-FD enables meter-to-concentrator data exchange in AMI networks. AEC-Q100 Grade 1 qualification supports outdoor cabinet installations subject to temperature extremes, and the 5V-tolerant I/O simplifies interface to analog front-end components and shunt resistors.
Recomendado
Home Automation and Consumer Appliances
The ATSAMC20J18A-MUT is a strong fit for home automation hubs, smart appliances, and white-goods controllers needing a balance of connectivity, processing headroom, and cost. The Cortex-M0+ core manages user-interface logic, sensor fusion, and wireless co-processor communication via SERCOM-configured SPI/UART links to modules like Bluetooth or LoRa transceivers. The 256 KB Flash supports Wi-Fi/BLE provisioning stacks and OTA update routines, and the 84-pin I/O budget accommodates multiple keypad, LED, and relay drivers. The 2.7V-5.5V supply range enables direct battery or AC-DC adapter powering without additional regulators.
Recomendado
Low-Cost BLDC and Stepper Motor Control
The ATSAMC20J18A-MUT drives small BLDC and stepper motors in fans, pumps, e-bike accessories, and small appliances. The 48 MHz Cortex-M0+ executes commutation routines with hardware timers providing 6-step or FOC support via the PWM peripherals, and the 12-bit ADC reads back-EMF and current shunt signals at 1 MSPS. The 5V-tolerant I/O interfaces directly to 3.3V or 5V gate drivers, while 256 KB Flash holds motor-control libraries and customer-specific parameter sets. AEC-Q100 Grade 1 qualification extends use to under-hood automotive fan and pump controllers where temperature swing is significant.
Recomendado
Sensor Hub and Data Logger
The ATSAMC20J18A-MUT acts as a multi-sensor hub aggregating temperature, pressure, humidity, and motion data in industrial monitoring and asset-tracking applications. Its 12-bit ADC and SERCOM interfaces (I2C/SPI) connect to external sensors, while DMA channels move data into the 32 KB SRAM without CPU intervention. The 256 KB Flash stores logging firmware and buffering logic, and CAN-FD transmits aggregated telemetry to higher-level controllers. The -40C to +85C industrial temperature rating supports deployment in factories, warehouses, and outdoor enclosures.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ATSAMC20J18A-MUT — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ATSAMC20J18A-MNT | ATSAMC20J18A-AUT | ATSAMC20J17A-AUT | ATSAMD20J18A-MUT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-pin VQFN (9x9 mm) | 64-pin VQFN (9x9 mm) - same | 64-pin VQFN (9x9 mm) - same | 64-pin VQFN (9x9 mm) - same | 64-pin VQFN (9x9 mm) - same |
| Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum CPU Clock | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 256 KB | 256 KB | 256 KB | 128 KB (-50%) | 256 KB |
| SRAM | 32 KB | 32 KB | 32 KB | 16 KB (-50%) | 32 KB |
| CAN-FD Peripheral | Yes | Yes | Yes | Yes | No |
| Operating Temperature | -40C to +85C (industrial) | -40C to +85C | -40C to +125C (automotive) | -40C to +125C (automotive) | -40C to +85C |
| Unit Price (qty 100, USD) | $3.42 | ~$3.42 | ~$4.10 | ~$3.10 | ~$3.30 |
Principais diferenciais
- Integrated CAN-FD controller vs SAM D20 family (vs ATSAMD20J18A-MUT)
- AEC-Q100 Grade 1 qualification for body electronics (vs ATSAMC20J18A-AUT)
- Pin-compatible upgrade path from SAM D20 (vs ATSAMD20J18A-MUT)
- Higher 256KB Flash vs lower-cost C20 variants (vs ATSAMC20J17A-AUT)
Notas de projeto
Per the SAM C20 datasheet summary, place a 100 nF ceramic decoupling capacitor on each VDD pin and a bulk 4.7 uF to 10 uF capacitor at the regulator output. Add a ferrite bead or 0 ohm resistor between VDD and VDDCORE if your design separates analog and digital rails. Failure to decouple the VDD pin closest to the analog blocks will inject 1 MSPS ADC sampling noise into other peripherals.
The ATSAMC20J18A-MUT in 64-pin VQFN has an exposed thermal pad (pin 64) that MUST be soldered to a ground copper pour for thermal dissipation and electrical grounding. Use at least 100 mm^2 of 1 oz copper on the top layer for thermal relief; without this pad soldered, the junction temperature can rise 15-20 C above ambient, reducing long-term reliability in enclosed automotive and industrial environments.
Route the SERCOM peripheral traces with 50 ohm controlled impedance if running SPI above 10 MHz or CAN-FD above 2 Mbit/s. Keep the 12-bit ADC analog traces away from SERCOM and PWM switching signals, and place a ground guard ring around the ADC reference capacitor (typically 100 nF X7R) to minimize digital switching noise coupling. Use Microchip's SAM C20 PCB checklist (AN_42365) for layout reference.
Common pitfalls: (1) Forgetting to configure the NVMCTRL peripheral to enable Flash write/erase - leaving the default read-only lock prevents in-application programming; (2) Enabling the WDT without first clearing the SYSTICK lock register, causing immediate reset on first boot; (3) Using PTC channels that conflict with SERCOM defaults - always re-pin-map via PORTMUX before enabling interrupts; (4) Loading code > 256 KB causes NVM boot loop.
For CAN-FD bus signaling, use a twisted-pair cable with 120 ohm termination at both ends, and add a common-mode choke near the transceiver output. The ATSAMC20J18A-MUT CAN-FD controller outputs CMOS levels, so an external CAN transceiver (e.g., MCP2562FD) is mandatory - never connect the MCU pins directly to a CAN bus. Verify the CAN baud rate configuration matches the FD data segment timing per ISO 11898-1:2015.
Informações de conformidade
Per Microchip product family documentation, the SAM C20 family is AEC-Q100 Grade 1 qualified; the MUT variant is the industrial (-40C to +85C) grade in tape-and-reel. Green compliance (RoHS, REACH, lead-free, halogen-free) is confirmed via the Mouser and DigiKey listings.
