ATTINY24A-SSN - 20MHz 8-Bit AVR MCU | Microchip Technology
N.º da peça: ATTINY24A-SSN ✓ AtivoATTINY24A-SSN Visão geral
An 8-bit AVR microcontroller is a compact embedded-control device that executes instructions using an AVR RISC architecture. It belongs to the hierarchy of microcontrollers, embedded processors, and semiconductors. Unlike a general-purpose processor, the ATTINY24A integrates flash program memory, data EEPROM, SRAM, timers, an ADC, and serial interfaces into one device, allowing a small PCB and low component count for compact control systems.
Key features include 90 AVR instructions, 32 general-purpose working registers, a 10-bit analog-to-digital converter, and two timer/counter blocks with PWM channels. Its 2 KB flash capacity is intended for compact firmware, while 128 bytes of EEPROM provides nonvolatile parameter storage. The 12 I/O lines support digital control and external functions, and the USI expands communication options without requiring a larger microcontroller package.
The ATTINY24A combines a high-performance low-power AVR core with Microchip picoPower technology. At 4.5 V to 5.5 V, the maximum clock is 20 MHz; at lower supply voltage, operation extends down to 1.8 V when the clock is limited to 4 MHz. Separate 8-bit and 16-bit timer/counter resources support timing, event counting, and PWM generation, while the ADC provides four differential input combinations through its programmable-gain capability.
Typical applications include compact industrial control modules, battery-powered sensor nodes, LED lighting controllers, small motor-control boards, programmable timers, and low-cost serial-interface products. The 14-pin SOIC package also makes ATTINY24A-SSN practical for prototypes and designs that require through-hole assembly compatibility. Its combination of 12 I/O pins, 2 KB flash, and analog conversion is sufficient for lightweight sensing and control tasks.
Design the supply rail so it remains within the required voltage-versus-frequency limits, especially when operating below 4.5 V. Use the manufacturer pin-description table when assigning tracks, and account for programming access, decoupling, ground-return paths, and ADC input conditioning. The Request a Quote form on this page provides current commercial availability and lead-time information.
This page combines the manufacturer device capabilities with practical selection guidance, pin information, design considerations, and verified drop-in replacement context. These engineering resources help engineers evaluate the ATTINY24A-SSN for a new design or an existing 14-pin AVR board without changing the core architecture.
Alternativas drop-in para ATTINY24A-SSN — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com ATTINY24A-SSN (mesmo formato e footprint) — diferindo em Architecture, General-Purpose I/O Lines, General-Purpose Working Registers, Mounting Type, Package.
ATTINY24A-SSNR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ATTINY24A-PU
✅ Drop-InConsulte o preço
Ver ficha técnica →ATTINY24A-SSN Classificações máximas e características elétricas
| Architecture | 8-bit AVR RISC |
| Frequência máxima de clock | 20 MHz |
| Flash Memory | 2 KB |
| Program Memory Organization | 1K x 16 words |
| EEPROM | 128 bytes |
| SRAM | 128 bytes |
| General-Purpose I/O Lines | 12 lines |
| General-Purpose Working Registers | 32 registers |
| ADC Resolution | 10 bits |
| Timer/Counter 0 | 8-bit with 2 PWM channels |
| Timer/Counter 1 | 16-bit with 2 PWM channels |
| AVR Instruction Set | 90 instructions |
| USI Support | Universal Serial Interface |
| Operating Supply Voltage at 20 MHz | 4.5 V to 5.5 V |
| Low-Voltage Operation | 1.8 V at 4 MHz |
| Faixa de temperatura de operação | -40°C to +105°C |
| Encapsulamento | 14-pin SOIC |
| Tipo de montagem | Surface mount |
| Programmable Flash | In-system programmable |
| Status RoHS | Unknown |
Configuração de pinos do ATTINY24A-SSN
| Pino 1 | PB0/MOSI/DI/SDA — Port B input/output, SPI MOSI, USI data input, or TWI data |
| Pino 2 | PB1/MISO/DO/SCL — Port B input/output, SPI MISO, USI data output, or TWI clock |
| Pino 3 | PB2/OC0A/PCINT2 — Port B input/output, Timer/Counter0 PWM output, or pin-change interrupt |
| Pino 4 | PB3/OC0B/PCINT3 — Port B input/output, Timer/Counter0 complementary PWM output, or pin-change interrupt |
| Pino 5 | VCC — Power supply input |
| Pino 6 | GND — Ground |
| Pino 7 | PA0/ADC0/AREF — Port A input/output, ADC input channel 0, or analog reference |
| Pino 8 | PA1/ADC1/AIN0 — Port A input/output, ADC input channel 1, or differential analog input |
| Pino 9 | PA2/ADC2/AIN1 — Port A input/output, ADC input channel 2, or differential analog input |
| Pino 10 | PA3/ADC3/T0 — Port A input/output, ADC input channel 3, or Timer/Counter1 input |
| Pino 11 | PA4/ADC4/T1 — Port A input/output, ADC input channel 4, or Timer/Counter1 input |
| Pino 12 | PA5/ADC5/T2 — Port A input/output, ADC input channel 5, or Timer/Counter1 input |
| Pino 13 | PA6/ADC6/SC0 — Port A input/output, ADC input channel 6, or USI clock |
| Pino 14 | PA7/ADC7/SC1 — Port A input/output, ADC input channel 7, or USI data output |
Aplicações típicas
ATTINY24A-SSN é adequado para 6 aplicaçãos: Industrial Sensor Node, LED Lighting Controller, Battery-Powered Monitoring Device, Small Motor Controller, Programmable Timer Module, Compact Serial Interface Product.
Industrial Sensor Node
The ATTINY24A-SSN fits compact industrial sensing modules that need local analog measurement and digital control without a larger processor. Its 10-bit ADC can monitor a conditioned sensor signal, while 12 general-purpose I/O lines provide connections for inputs, status indicators, and actuator commands. The two timer/counter blocks support periodic sampling and PWM generation where needed. Operation down to 1.8 V at 4 MHz is useful for low-voltage installations, while the -40°C to +105°C range suits industrial environments. Firmware fits within the 2 KB flash limit when the application remains focused, and 128 bytes of EEPROM can retain calibration or configuration values without continuous flash writes.
Recomendado
LED Lighting Controller
The ATTINY24A-SSN can control multiple low-power LED channels in decorative lighting, signage, or status panels. Its 8-bit and 16-bit timer/counter blocks each provide two PWM channels, allowing dimming and timing functions without relying on software bit-banging. The 12 I/O lines are sufficient for LED drive-enable inputs, push-button controls, and fault indicators in a small controller. At up to 20 MHz, the MCU can coordinate multiple animation or fade sequences while its 2 KB flash holds a focused control program. Choose external transistors when LED current exceeds the device's direct I/O capability and preserve a low-impedance ground return for stable PWM timing.
Recomendado
Battery-Powered Monitoring Device
The ATTINY24A-SSN is appropriate for battery-powered monitors that periodically measure a sensor and transmit or locally record a result. Its picoPower AVR design supports low-power operation, and the device accepts a 1.8 V supply when clocked at 4 MHz. The 10-bit ADC handles modest-resolution measurements, 128 bytes of EEPROM stores operating counters or thresholds, and the timer/counter resources provide periodic wake-up and timing functions. A practical design should switch off sensor power during idle intervals, use the lowest acceptable clock rate, and calculate average current from the actual sleep and active durations. The 2 KB flash limit favors a compact, dedicated monitoring function.
Recomendado
Small Motor Controller
The ATTINY24A-SSN can control a small DC motor, valve, or actuator in a compact embedded controller. Its timer PWM outputs provide variable duty-cycle commands, while external inputs can define limits, start commands, or speed selections. The 10-bit ADC can supervise an analog command or current-sense signal, and 12 I/O lines leave room for status feedback and protection signals. Firmware can implement acceleration ramps, stall detection, and timed motion within the 2 KB program-memory budget. An external MOSFET or driver is required when current or voltage exceeds direct I/O limits. Validate switching-node layout carefully to prevent controller noise from disrupting the ADC, timer, or serial functions.
Recomendado
Programmable Timer Module
The ATTINY24A-SSN can implement a compact programmable timer for appliance control, laboratory sequencing, or equipment panels. The 16-bit timer/counter provides the basis for extended timing intervals, while the 8-bit timer can divide time into faster control or PWM tasks. Twelve I/O lines support start, stop, mode, and output controls, and the 10-bit ADC can monitor a dial, potentiometer, or external sensor when the module needs analog adjustment. Nonvolatile configuration values can be retained in 128 bytes of EEPROM, reducing repeated programming. Its 20 MHz maximum clock supports responsive menu and control logic, while 2 KB of flash restricts the design to a dedicated rather than highly generalized user interface.
Recomendado
Compact Serial Interface Product
The ATTINY24A-SSN is suitable for small serial-interface products such as configuration adapters, simple sensors, and embedded controllers requiring a Universal Serial Interface. The USI provides a compact way to connect compatible serial peripherals while the 12 I/O lines remain available for control and status functions. Its AVR RISC core executes instructions efficiently for protocol handling, and 2 KB of flash supports a focused command parser or state machine. The device can run at up to 20 MHz from a 4.5 V to 5.5 V supply, or at 4 MHz from 1.8 V when a lower-voltage interface is required. Validate signal levels and timing against the selected peripheral and use the manufacturer pin table for exact USI multiplexing.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ATTINY24A-SSN — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ATTINY24A-SSNR | ATTINY24 |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC |
| Architecture | 8-bit AVR RISC | 8-bit AVR RISC | 8-bit AVR RISC |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz |
| Flash Memory | 2 KB | 2 KB | 2 KB |
| EEPROM | 128 bytes | 128 bytes | 128 bytes |
| SRAM | 128 bytes | 128 bytes | 128 bytes |
| ADC Resolution | 10 bits | 10 bits | 10 bits |
| General-Purpose I/O | 12 lines | 12 lines | 12 lines |
Principais diferenciais
- Closest documented same-footprint production alternative (vs ATTINY24A-SSNR)
- Documented functional drop-in path from the original ATtiny24 generation (vs ATTINY24)
- Compact analog and timing integration (vs ATTINY24A-SSNR)
Notas de projeto
Keep the supply inside the frequency-dependent operating limits. The ATTINY24A-SSN supports 4.5 V to 5.5 V at up to 20 MHz, while operation down to 1.8 V requires limiting the clock to 4 MHz. Place the required decoupling capacitor close to VCC and GND, provide a low-impedance ground return, and avoid routing motor or switching-converter currents through the controller ground path. Review power consumption in both active and sleep modes rather than estimating it from clock frequency alone.
Use the manufacturer pin-description table to assign the 14 SOIC leads, especially where ADC, timer, USI, and general-purpose I/O functions are multiplexed. Keep the programming interface accessible and provide a stable ground reference for analog measurements. Route ADC inputs away from PWM outputs, motor-switching nodes, and inductor connections. If analog accuracy matters, use a quiet reference arrangement and consider a separate filtered analog-supply branch rather than routing sensor signals through high-current paths.
Do not treat 2 KB of flash as interchangeable with the larger ATtiny44A and ATtiny84A devices. Firmware, bootloader layout, fuse configuration, and application behavior must be checked before using any ATTINY24A ordering variant. Also avoid assuming that every same-family SOIC MPN is a drop-in replacement because packing codes and some electrical characteristics can differ. Confirm pin assignments, clock behavior, programming method, temperature grade, and lifecycle status against the manufacturer documentation.
Informações de conformidade
The manufacturer product information and distributor listings do not state the requested compliance attributes. AEC-Q100 qualification is not identified for this industrial-temperature device.