Microchip Technology

ATTINY24A-SSF - 20MHz 8-Bit AVR MCU | Microchip Technology

N.º da peça: ATTINY24A-SSF ✓ Ativo
1.8 V to 5.5 V Vdss 14-pin SOIC Package 20 MHz Speed 2 KB Memory
MOQ: 1 |

ATTINY24A-SSF Visão geral

The Microchip Technology ATTINY24A-SSF is a 20 MHz, 8-bit AVR RISC microcontroller with 2 KB of ISP Flash memory, 128 B of SRAM, and 128 B of EEPROM in a 14-pin SOIC package. The device provides 12 general-purpose I/O lines, 32 working registers, an 8-bit timer/counter with two PWM channels, a 16-bit timer/counter with two PWM channels, internal and external interrupts, and an 8-channel 10-bit ADC.

A microcontroller is a programmable semiconductor that combines a processor core, nonvolatile program memory, working memory, and peripherals on one integrated circuit. The ATtiny24A belongs to Microchip's picoPower AVR family and uses an enhanced RISC architecture with throughput approaching 1 MIPS per MHz. This combination makes it suitable for compact embedded-control products that need more processing capability than a basic logic controller but do not require a larger general-purpose MCU.

The ATTINY24A-SSF provides 2 KB of in-system programmable Flash for firmware, 128 B of SRAM for volatile data, and 128 B of EEPROM for nonvolatile settings. Its 12 I/O lines support digital interfaces, timers, and ADC inputs, while the 10-bit ADC measures up to eight analog channels. The dual 8-bit and 16-bit timer architecture provides flexible event counting, delay generation, and PWM output for dimming, motor control, and proportional control functions.

Its communication and programming architecture follows the AVR ecosystem. The device supports In-Circuit Serial Programming and can use an 8-pin SIL debug connector through the MPLAB Snap programmer, with two I/O pins and the reset line carrying the programming interface. The 20 MHz maximum clock rate provides ample instruction throughput for embedded logic, sensor acquisition, and local actuator control, although the 2 KB program-memory limit requires compact firmware and careful code organization.

Typical applications include low-cost sensor nodes, LED dimming controllers, small motor controllers, industrial timers, compact battery-powered instruments, and automotive accessories. The ADC enables direct interface to resistive sensors, while the PWM channels can drive lamps, fans, or small solenoids. A system requiring more flash memory can evaluate the pin-compatible ATtiny24A family variants when the selected suffix maintains the required package, temperature grade, and production configuration.

PCB design should reserve the power pins for a short, low-impedance supply path and place the decoupling capacitor close to the device. Use the manufacturer pin-description table when assigning multiplexing functions to PA and PB pins, and preserve access to the programming interface so firmware updates and debugging remain practical after assembly.

This page organizes the key electrical, memory, timing, and package characteristics of the ATTINY24A-SSF with practical application guidance, programming considerations, and a parameter-by-parameter comparison of compatible ATtiny24A ordering options. It is intended to help engineers validate footprint, functionality, lifecycle, and sourcing requirements before committing the MCU to an embedded design.

Alternativas drop-in para ATTINY24A-SSF — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

ATTINY24A-SSFR

✅ Drop-In
📦 14-SOIC
20 MHz, 2 KB Flash, and 128 B SRAM match exactly (0% key-parameter difference); ordering configuration supports a high-temperature grade up to 125 °C.

📋 Alternativa de referência (fora do catálogo)

ATTINY24A-SSU

✅ Drop-In
📦 14-SOIC
20 MHz, 2 KB Flash, and 128 B SRAM match exactly (0% key-parameter difference); ordering configuration is identified as industrial temperature.

📋 Alternativa de referência (fora do catálogo)

ATTINY24A-SSUR

✅ Drop-In
📦 14-SOIC
20 MHz, 2 KB Flash, and 128 B SRAM match exactly (0% key-parameter difference); delivery and temperature suffix must be checked in the ordering table.

📋 Alternativa de referência (fora do catálogo)

ATTINY24A-SSF Classificações máximas e características elétricas

Product Type 8-bit RISC Flash Microcontroller
Architecture AVR enhanced RISC
CPU Family AVR ATtiny
Frequência máxima de clock 20 MHz
Flash Memory 2 KB
Flash Organization 1K x 16 bits
EEPROM 128 bytes
SRAM 128 bytes
General-Purpose I/O Lines 12
General-Purpose Working Registers 32
ADC Resolution 10 bits
ADC Channels 8 channels
Timer/Counter 0 8-bit with 2 PWM channels
Timer/Counter 1 16-bit with 2 PWM channels
Program Memory Type In-System Programmable Flash
Programming Interface ICSP with 8-pin SIL connector interface
Operating Supply Range 1.8 V to 5.5 V
Encapsulamento 14-pin SOIC
Tipo de montagem Surface mount

Configuração de pinos do ATTINY24A-SSF

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
Pino 1 PB0/MOSI/DI/SDA/OC1A/PCINT0 — Multiplexed port-B input/output, timer output, serial interface, and external interrupt
Pino 2 PB1/MISO/DO/SCL/OC1B/PCINT1 — Multiplexed port-B input/output, timer output, serial interface, and external interrupt
Pino 3 PB2/OC0B/INT0/PCINT2 — Multiplexed port-B input/output, timer output, external interrupt, and pin-change interrupt
Pino 4 PB3/MOSI/DI/SDA/OC1A — Multiplexed port-B input/output, timer output, and serial interface
Pino 5 PA0/ADC0/AREF — Port-A input/output and ADC channel 0
Pino 6 PA1/ADC1/AIN0 — Port-A input/output, ADC channel 1, and analog input
Pino 7 PA2/ADC2/AIN1 — Port-A input/output, ADC channel 2, and analog input
Pino 8 PA3/ADC3/T0 — Port-A input/output, ADC channel 3, and timer input
Pino 9 GND — Ground connection
Pino 10 PA4/ADC4/T1 — Port-A input/output, ADC channel 4, and timer input
Pino 11 PA5/ADC5/T2 — Port-A input/output, ADC channel 5, and timer input
Pino 12 PA6/ADC6 — Port-A input/output and ADC channel 6
Pino 13 PA7/ADC7 — Port-A input/output and ADC channel 7
Pino 14 VCC — Supply voltage connection

Aplicações típicas

ATTINY24A-SSF é adequado para 6 aplicaçãos: Compact Industrial Sensor Node, LED Dimming Controller, Small Motor and Fan Controller, Programmable Timer and Sequencer, Battery-Powered Measurement Instrument, Automotive Accessory Controller.

🏭

Compact Industrial Sensor Node

The ATTINY24A-SSF fits compact industrial sensor nodes because its 8-channel, 10-bit ADC can sample several analog inputs while the 20 MHz AVR core handles filtering, threshold decisions, and data formatting. Its 2 KB Flash supports compact firmware, and 128 B of SRAM provides working space for acquisition and control state. Place the device between resistive sensors and a communication interface, then use the ADC reference and port multiplexing from the manufacturer data sheet. The main constraint is code and buffer capacity: designs requiring extensive calibration tables, history logging, or multiple protocol stacks should use a larger ATtiny family member.

💡

LED Dimming Controller

The ATTINY24A-SSF is well suited to LED dimming because its timer/counters provide two PWM channels each in 8-bit and 16-bit configurations. The 20 MHz clock allows accurate PWM generation, while the 10-bit ADC can monitor a current-sensed or potentiometer input for dimming control. Firmware can map an analog command to PWM duty cycle and handle fade sequencing or fault limits. Confirm timer prescaler and PWM frequency against the LED driver topology, and account for the ATtiny24A's limited 2 KB Flash when adding lighting effects.

⚡

Small Motor and Fan Controller

The ATTINY24A-SSF can control small motors, fans, and solenoids where PWM speed adjustment and compact firmware are more important than high processing throughput. Two PWM outputs from each timer/counter support proportional actuator commands, while the ADC can monitor current or supply voltage for protection. A practical design uses a transistor or MOSFET driver rather than driving a load directly from an I/O pin. Add stall, overtemperature, and overcurrent handling in firmware, and verify the 20 MHz timer configuration against the required PWM frequency and duty-cycle resolution.

⏱️

Programmable Timer and Sequencer

The ATTINY24A-SSF fits programmable timers and sequencing controls because it combines 8-bit and 16-bit timer/counters with internal and external interrupts. The 16-bit timer provides a longer count range, while the 8-bit timer can divide frequency, generate delays, or provide PWM. Firmware can implement multistep sequences using the interrupt vectors and general-purpose I/O, and the ADC can optionally verify a process variable. The 2 KB Flash limit favors compact state machines rather than elaborate user interfaces, while 128 B of SRAM supports a modest working schedule.

🔋

Battery-Powered Measurement Instrument

The ATTINY24A-SSF supports battery-powered measurement instruments where an 8-bit processor, 10-bit ADC, and low pin count reduce board complexity. Its operating range of 1.8 V to 5.5 V allows design around common low-voltage cells or regulated supplies, and the AVR sleep modes can reduce energy between measurements. Use the ADC for slowly changing analog inputs and the PWM outputs for reference or excitation control. Validate active current, sleep current, and startup behavior against the battery budget because total energy depends on firmware duty cycle and measurement rate.

🚗

Automotive Accessory Controller

The ATTINY24A-SSF can serve as a compact controller for selected automotive accessories when the exact suffix, qualification status, and operating requirements are verified. The 20 MHz AVR core, 12 I/O lines, ADC, and PWM channels are useful for switches, lamps, sensor interfaces, and small actuators. A robust design must include transient protection, valid automotive-grade decoupling, watchdog and fault recovery, and qualification review of the specific ATTINY24A ordering code. Do not assume that family-level automotive positioning applies to every package or temperature suffix without checking the manufacturer's qualification documentation.

Resumo dos produtos recomendados

ATTINY24A-SSFR Same-family 14-SOIC option for high-temperature environments Usado em: Compact Industrial Sensor Node, LED Dimming Controller, Small Motor and Fan Controller, Battery-Powered Measurement Instrument, Automotive Accessory Controller ATTINY24A-SSU Same-family 14-SOIC industrial ordering option Usado em: Compact Industrial Sensor Node, Small Motor and Fan Controller, Programmable Timer and Sequencer, Battery-Powered Measurement Instrument, Automotive Accessory Controller ATTINY24A-SSUR Same-core 14-SOIC ordering alternative Usado em: LED Dimming Controller, Programmable Timer and Sequencer
What is the ATTINY24A-SSF and what are its key specifications?
The ATTINY24A-SSF is a Microchip Technology 8-bit AVR RISC microcontroller operating up to 20 MHz with 2 KB of ISP Flash, 128 B of SRAM, and 128 B of EEPROM. It provides 12 general-purpose I/O lines and is packaged in 14-pin SOIC. According to the Microchip ATtiny24A/44A/84A data sheet DS40002269A, the device also includes an 8-channel 10-bit ADC and separate 8-bit and 16-bit timer/counters with PWM outputs.
Where can I download the ATTINY24A datasheet PDF?
The official Microchip ATtiny24A/44A/84A data sheet DS40002269A can be downloaded from Microchip's DeviceDoc PDF URL listed on this page. It covers memory organization, electrical characteristics, clocking, ADC operation, timers, interrupt vectors, programming, and package information. Use the ATtiny24A columns when evaluating the ATTINY24A-SSF, and verify the ordering-code suffix for package and temperature requirements.
What is the ATTINY24A pinout?
The ATTINY24A uses a 14-pin SOIC with 12 I/O positions plus power connections, and several port pins support alternate peripheral functions. The package drawing and exact multiplexed names must be assigned from the pin-description table in the Microchip ATtiny24A/44A/84A data sheet DS40002269A. In particular, check the ADC, timer, USI, and programming functions before treating an I/O pin as a general-purpose logic signal.
What is the difference between ATTINY24A-SSF, ATTINY24A-SSFR, and ATTINY24A-SSU?
The three ATTINY24A suffixes identify different ordering configurations of the same 14-pin SOIC microcontroller family, while the underlying core provides 2 KB of Flash, 128 B of SRAM, 128 B of EEPROM, 12 I/O lines, and operation up to 20 MHz. The SSFR option is identified as an extended-temperature configuration, while SSU is identified as industrial temperature. Use the manufacturer ordering-information table to confirm delivery form, temperature grade, and current availability.
How do I program the ATTINY24A-SSF?
The ATTINY24A-SSF is programmed through its In-Circuit Serial Programming interface, and Microchip documents an 8-pin SIL connection for use with the MPLAB Snap programmer. The connection uses two device I/O pins and the reset line. According to Microchip's ATtiny24A/44A/84A data sheet DS40002269A, the MCU also supports ISP programming; use the documented fuse, clock, and boot-lock settings appropriate to the finished design.
Is the ATTINY24A-SSF suitable for battery-powered sensor applications?
The ATTINY24A-SSF is suitable for compact battery-powered sensor products because it combines a 20 MHz AVR core with low-power sleep modes and an 8-channel 10-bit ADC. Its 2 KB Flash and 128 B SRAM constrain firmware size and working buffers, so a production design should measure sleep current, ADC sampling energy, and startup time. The device's 1.8 V to 5.5 V operating range also supports common low-voltage supply systems.
What can ATTINY24A-SSF replace?
The most direct replacements are the ATTINY24A-SSFR and ATTINY24A-SSU devices because they retain the same ATtiny24A core, 20 MHz clock rating, 2 KB Flash, 128 B SRAM, 128 B EEPROM, 12 I/O lines, and 14-pin SOIC format. Replacement approval should still confirm the required temperature grade, packing format, reset configuration, fuse settings, and production status. Other ATtiny devices are not drop-in substitutes unless their packages and pin assignments are independently confirmed.
ATTINY24A-SSF vs ATTINY24A-SSFR: which version should I choose?
Choose ATTINY24A-SSF for an industrial 14-pin SOIC design that matches the required sourcing configuration, and choose ATTINY24A-SSFR when its documented high-temperature capability up to 125 °C is necessary. Both devices use the same 20 MHz ATtiny24A core and 2 KB Flash architecture, so firmware compatibility is expected within the family. The decision should be based on temperature requirements, lifecycle, packaging, and approved sourcing rather than raw clock speed.
When should I choose ATTINY24A-SSF over a larger ATtiny microcontroller?
Choose ATTINY24A-SSF when a control task fits within 2 KB of program Flash, 128 B of SRAM, and 12 I/O lines. It is appropriate for compact timers, analog sensing, LED dimming, and basic actuator control where a larger MCU would add unnecessary cost and board area. Choose a larger ATtiny family member when firmware growth, more I/O, additional memory, or more specialized peripherals are required rather than forcing excess resources into this compact device.
Where can I buy ATTINY24A-SSF online?
Use the Request a Quote form on this page to request ATTINY24A-SSF pricing, stock, lead time, and the required package or delivery quantity. The manufacturer product page identifies ATtiny24A as an in-production family with a newer-device relationship shown against the original ATtiny24, so lifecycle and allocation should be confirmed during quotation. Submit the exact ATTINY24A-SSF ordering code to avoid accidental substitution of another suffix.
What is the price of ATTINY24A-SSF?
The current ATTINY24A-SSF quotation is provided through the Request a Quote form on this page because pricing and availability can vary with quantity, delivery configuration, and market conditions. Request the exact ATTINY24A-SSF MPN and indicate the required quantity, packaging preference, and target delivery location. This ensures the quotation corresponds to the 14-pin SOIC industrial configuration rather than another ATtiny24A suffix.
What is the lead time and stock status for ATTINY24A-SSF?
Current stock, minimum order quantity, and lead time for ATTINY24A-SSF should be confirmed through the Request a Quote form on this page. Microchip identifies the ATtiny24A family as in production, but exact suffix availability can still depend on scheduled production and packaging allocation. Include the required quantity and target date in the request so the supplier can confirm the relevant ATTINY24A-SSF configuration.
Is ATTINY24A-SSF in stock?
The current ATTINY24A-SSF inventory status should be checked using the Request a Quote form on this page. A search listing alone does not establish a guaranteed allocation, so use the form to request live stock and lead-time confirmation for the exact MPN. If your production schedule is sensitive, also ask the supplier to identify any lifecycle or allocation notices affecting the ATtiny24A family.
How much current does the ATTINY24A-SSF consume?
Operating and sleep-current figures for the ATTINY24A-SSF depend on operating voltage, clock source, clock frequency, peripheral state, and execution mode. The Microchip ATtiny24A/44A/84A data sheet DS40002269A contains the device-specific DC characteristics. Design the power subsystem using the worst-case active mode required by the firmware and separately budget the sleep-mode current for battery life.
Is the ATTINY24A-SSF RoHS compliant and automotive qualified?
The ATTINY24A-SSF's RoHS, REACH, and automotive qualification status should be confirmed from the current Microchip product documentation for the exact ordering code. The ATTINY24 family has been recommended for automotive design, but family positioning alone does not establish that every suffix has the same AEC-Q100 qualification. Use the manufacturer compliance and qualification records as the controlling documents for production release.

Dados de referência de engenharia para ATTINY24A-SSF — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Select the ATTINY24A-SSF for a 14-pin SOIC industrial embedded design whose firmware fits within 2 KB of Flash and whose control task fits 128 B of SRAM and 12 I/O lines. Choose ATTINY24A-SSFR when the documented high-temperature capability up to 125 °C is required for the installation environment. Choose ATTINY24A-SSU for the industrial ordering configuration when that suffix better matches production and delivery requirements. ATTINY24A-SSUR is another same-core option, but its ordering attributes should be confirmed before substitution. All listed options share the core clock, memory architecture, and package format; the selection should therefore focus on temperature grade, packing, lifecycle, and procurement constraints. Move to a larger ATtiny family member when the application requires substantially more program memory, additional I/O, higher-resolution conversions, larger serial buffers, or more complex real-time control.

Comparação com alternativas

Parâmetro Este produto ATTINY24A-SSFR ATTINY24A-SSU ATTINY24A-SSUR
Package 14-SOIC 14-SOIC 14-SOIC 14-SOIC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Maximum Clock Frequency 20 MHz 20 MHz 20 MHz 20 MHz
Flash Memory 2 KB 2 KB 2 KB 2 KB
EEPROM 128 bytes 128 bytes 128 bytes 128 bytes
SRAM 128 bytes 128 bytes 128 bytes 128 bytes
General-Purpose I/O Lines 12 12 12 12
ADC 8-channel, 10-bit 8-channel, 10-bit 8-channel, 10-bit 8-channel, 10-bit
Operating Voltage 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V 1.8 V to 5.5 V

Principais diferenciais

  • Combines an 8-channel ADC with dual timer banks in a compact 14-pin MCU (vs ATTINY24A-SSFR)
  • Offers the same 20 MHz core and 2 KB memory footprint across the compared ordering options (vs ATTINY24A-SSU)
  • Supports compact AVR embedded control with 12 I/O lines (vs ATTINY24A-SSUR)

Notas de projeto

Place the supply decoupling capacitor immediately across the VCC and GND pins, with the shortest possible ground return and no test pads or routing breaks in the current path. Keep the 14-SOIC footprint unobstructed on both sides of the board where possible. Route the ICSP signals away from switching nodes and analog inputs to reduce programming-pulse and switching-transient coupling into sensitive measurements.

Use the manufacturer pin-description table before assigning PA and PB functions because the 12 I/O pins are multiplexed among ADC inputs, timer inputs, interrupt inputs, USI signals, and PWM outputs. Confirm that the selected peripheral function does not conflict with a second subsystem. For analog measurements, provide a quiet reference path and keep the ADC input traces short, away from PWM and motor-driver switching nodes.

The 2 KB Flash limit is the most common design constraint, so estimate firmware and bootloader requirements before finalizing the MCU. Reserve program memory for future fixes, avoid relying on large runtime libraries, and account for boot-lock and application sections when configuring fuses. Also verify the required reset level, clock source, brownout behavior, and ICSP access using the ATtiny24A/44A/84A data sheet DS40002269A.

Estimate average consumption from the firmware duty cycle rather than the active-mode current alone. The calculation should use the operating voltage, active current, sleep current, measurement duration, and number of ADC samples per operating cycle. Check that the supply remains within 1.8 V to 5.5 V at the MCU pins during switching transitions, especially when the same source powers motors, LEDs, or other loads.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The ATtiny24 family has been recommended for automotive design by Microchip, but qualification and material-compliance status for the exact ATTINY24A-SSF ordering code were not established. Verify current product documentation before production release.

Dados verificados em: 2026-11-14 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

attiny24a ssfr attiny24a pinout attiny24a datasheet attiny24a ssu attiny24a mur attiny24a programming attiny24a ssur attiny24a ssnr ATTINY24A-SSF datasheet pdf ATTINY24A-SSF pinout ATTINY24A-SSF equivalent ATTINY24A-SSF replacement ATTINY24A-SSF price ATTINY24A-SSF stock Microchip ATTINY24A-SSF

Componentes & termos relacionados

Microchip Technology ATTINY24A-SSF ATTINY24A-SSFR ATTINY24A-SSU ATTINY24A-SSUR ATtiny24A AVR AVR enhanced RISC architecture 8-bit microcontroller RISC microcontroller Flash memory ISP ICSP MPLAB Snap picoPower 14-SOIC SOIC family surface mount 10-bit ADC PWM microcontroller semiconductor embedded control industrial control
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ