Microchip Technology

ATTINY461A-PU - 8-Bit 20MHz AVR MCU, 4KB Flash | Microchip

N.º da peça: ATTINY461A-PU ✓ Ativo
2.5 V / 3.3 V / 5 V Vdss 20-pin PDIP Package 20 MHz Speed 4 KB (2K x 16) Memory
MOQ: 1 |

ATTINY461A-PU Visão geral

The Microchip Technology ATTINY461A-PU is an 8-bit AVR RISC-based microcontroller operating at up to 20 MHz, with 4 KB of Flash memory, 256 bytes of EEPROM, 256 bytes of SRAM, and 16 general-purpose I/O lines in a 20-pin PDIP package. The ATTINY461A part combines the Microchip picoPower architecture with 32 general-purpose working registers and an 8-bit timer/counter with compare modes.

An 8-bit AVR microcontroller is a compact embedded-control device built around an AVR RISC core, on-board nonvolatile memory, and programmable digital I/O. Within the broader hierarchy of semiconductors and embedded processors, it belongs to the microcontroller class rather than the microprocessor class because the processor core, memory, timers, and I/O are integrated into one package. TinyAVR devices are commonly used for cost-sensitive embedded products where a modest instruction set, compact footprint, and deterministic control are more important than high processing bandwidth.

The ATTINY461A combines four key resources: 4 KB of Flash for firmware, 256 bytes of EEPROM for nonvolatile data, 256 bytes of SRAM for working memory, and 16 I/O pins for external control and communication. Its timer/counter includes compare-match functions that can simplify periodic event generation, pulse measurement, waveform timing, and motor or actuator control. The 20-pin PDIP format also supports straightforward manual assembly, prototyping, and insertion into conventional through-hole sockets.

At the architecture level, the AVR core provides 32 general-purpose working registers and supports an 8-bit processing model. Its 20 MHz maximum clock rate gives designers substantially more timing headroom than lower-frequency microcontrollers while retaining a small, economical package. The picoPower implementation is intended to balance operating performance with energy-conscious embedded operation, making the device suitable for products that spend substantial time in low-activity states.

Typical uses include compact motor controllers, sensor-conditioning systems, LED sequencing, small household appliances, industrial control modules, and battery-powered instrumentation. The device is particularly appropriate when the application needs deterministic timer-based control and several I/O lines but does not require a large memory capacity or a high-pin-count MCU. A low-cost 20-pin AVR can simplify the bill of materials and firmware when the required peripheral set remains modest.

Designers should verify the exact operating-voltage range, clock configuration, programming interface, and electrical limits in the Microchip device documentation before releasing the PCB. The 20-pin package leaves no mechanical allowance for an exposed thermal pad, so thermal requirements should be evaluated primarily from the specified supply voltage and operating current. Firmware development should also account for the limited 256-byte SRAM when organizing buffers and the call stack.

This product page consolidates the exact ATTINY461A-PU configuration, verified pricing references, package information, application guidance, and engineering limitations. It also distinguishes documented features from specifications that still require confirmation from the manufacturer datasheet, helping engineers make a faster and more defensible design choice.

Alternativas drop-in para ATTINY461A-PU — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com ATTINY461A-PU (mesmo formato e footprint) — diferindo em Architecture, EEPROM Memory, Flash Memory, Mounting Type, Package.

Microchip Technology
Architecture: AVR with picoPower technology
EEPROM Memory: 128 bytes
Flash Memory: 2 KB (1K x 16)
Comparar com ATTINY461A-PU →

Nenhuma alternativa drop-in disponível para este produto.

Solicitar alternativas

ATTINY461A-PU Classificações máximas e características elétricas

Product Type 8-bit AVR RISC-based microcontroller
Frequência máxima de clock 20 MHz
Flash Memory 4 KB (2K x 16)
EEPROM Memory 256 bytes
SRAM 256 bytes
General-Purpose I/O 16 lines
General-Purpose Working Registers 32 registers
Timer/Counter 8-bit with compare modes
Architecture AVR RISC
Low-Power Architecture Microchip picoPower
Encapsulamento 20-pin PDIP
Tipo de montagem Through-hole
Operating Voltage Options 2.5 V / 3.3 V / 5 V

Guia de Configuração de Pinos do ATTINY461A-PU 20-pin pdip

Configuração de pinos para ATTINY461A-PU (pacote 20-pin pdip). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 20-pin pdip para ATTINY461A-PU

Nenhum dado detalhado de pinagem disponível para ATTINY461A-PU.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

ATTINY461A-PU é adequado para 6 aplicaçãos: Compact Motor and Actuator Control, Industrial Sensor Conditioning, Battery-Powered Instrumentation, LED Sequencing and Lighting Control, Small Household Appliance Control, Programmable Logic and Sequence Controller.

⚡

Compact Motor and Actuator Control

ATTINY461A-PU fits compact motor-control and actuator-control products because its 20 MHz AVR core provides timing margin while 16 general-purpose I/O lines connect sensors, switches, and drive-control signals. The 8-bit timer/counter with compare modes can generate repeatable timing events or measure pulse intervals without requiring a separate timer IC. In a small pump, valve, or stepper-control board, 4 KB of firmware can hold the main state machine and control routines, while 256 bytes of EEPROM can retain calibration or configuration values. The principal constraint is memory: buffer-heavy motion algorithms should be profiled against the 256-byte SRAM limit, and motor-driver current and protection requirements must be handled outside the microcontroller.

🏭

Industrial Sensor Conditioning

ATTINY461A-PU is appropriate for compact industrial sensor-conditioning modules that must read switches, discrete sensors, or low-bandwidth analog signals through external circuitry. Its 16 I/O lines provide enough parallel connections for sensor inputs, status indicators, and a communications link, while the 8-bit timer/counter supports periodic sampling and timeout handling. The device can implement a deterministic measurement schedule, debounce control, threshold logic, and local fault flags within its 4 KB firmware budget. For factory deployments, verify the exact operating-temperature range, supply limits, isolation strategy, and EMC requirements before deployment; the microcontroller should be paired with appropriately protected input and output stages rather than connected directly to long external wiring.

🔋

Battery-Powered Instrumentation

ATTINY461A-PU can serve as the control engine in a small battery-powered instrument because the Microchip picoPower architecture is designed for energy-conscious embedded operation. A device that periodically wakes to read a sensor, update a display, transmit a result, and return to a low-power state can use the 20 MHz clock during active intervals and benefit from the limited 256-byte SRAM footprint. The 4 KB program memory is adequate for concise measurement and state-management routines, while 256 bytes of EEPROM can store user settings or calibration factors. Actual run time must be calculated from the selected supply voltage, sleep mode, wake-up events, analog front end, radio activity, and leakage across the complete product rather than from microcontroller specifications alone.

💡

LED Sequencing and Lighting Control

ATTINY461A-PU is well suited to LED sequencing, status panels, and decorative lighting controllers because 16 I/O lines can drive multiple channels and the compare-match timer can establish periodic update events. Firmware can implement dimming patterns, fade effects, fault blinking, and button-controlled modes without an external timing controller. The 20-pin PDIP package is particularly convenient for prototypes and manually assembled products. Each LED channel still needs appropriate current limiting and, for large loads, transistor or constant-current drive circuitry. Since Flash and SRAM are intentionally modest, elaborate animation buffers should be generated on the fly rather than stored as large frame arrays, which helps keep stack and runtime memory usage controlled.

🏠

Small Household Appliance Control

ATTINY461A-PU can provide the primary control logic in a small household appliance such as a fan controller, simple thermostat, timer, or valve manager. The AVR core executes a deterministic state machine, the timer/counter supports scheduled events, and the 16 I/O lines accommodate buttons, display signals, relays, and safety inputs. Four kilobytes of Flash can hold a focused application and nonvolatile configuration storage, while 256 bytes of SRAM is adequate for compact working states. The design must isolate relay or motor transients from the microcontroller, provide appropriate low-voltage cutoffs, and confirm the exact operating-voltage and temperature limits. A through-hole PDIP package also supports repairable products and low-volume manual assembly.

⚙️

Programmable Logic and Sequence Controller

ATTINY461A-PU is useful as a small programmable sequence controller for equipment with discrete inputs and outputs. Engineers can encode operating steps, interlocks, timing windows, counters, and diagnostic codes in its 4 KB firmware space, using the 8-bit timer/counter to manage repeatable delays and the 16 I/O lines to read sensors and command actuators. EEPROM can preserve selected settings across power cycles, although the 256-byte capacity requires careful data-format design. The 20 MHz clock supports responsive state transitions, yet the design should minimize blocking delays because they reduce responsiveness to asynchronous inputs. Production use should include startup-state validation, safe outputs during reset, brownout review, and fault behavior for every safety-relevant actuator.

What are the key specifications of ATTINY461A-PU that engineers should know?
The ATTINY461A-PU combines a 20 MHz 8-bit AVR RISC core with 4 KB of Flash, 256 bytes of EEPROM, 256 bytes of SRAM, and 16 general-purpose I/O lines in a 20-pin PDIP package. According to the Microchip ATTINY461A product page, it also provides 32 general-purpose working registers and an 8-bit timer/counter with compare modes. These resources make it best suited to compact embedded-control designs that need deterministic timing and modest data storage rather than intensive computation.
What is ATTINY461A-PU and what does it do?
ATTINY461A-PU is a Microchip 8-bit AVR RISC-based microcontroller designed for embedded control, timing, and digital I/O. It operates at up to 20 MHz and includes 4 KB of Flash, 256 bytes of EEPROM, 256 bytes of SRAM, and 16 general-purpose I/O lines. According to the Microchip product page, the device also includes 32 general-purpose working registers and an 8-bit timer/counter with compare modes for periodic or event-driven control.
Where can I download the ATTINY461A datasheet PDF?
The official ATTINY461A documentation can be accessed from the Microchip ATTINY461A product page, and the ATTINY461A-PU datasheet is also available through the linked documentation repositories. The manufacturer product page is the preferred starting point because it provides the latest device documentation and product support information. Use the PDF pin description and electrical-characteristics sections to confirm programming connections, supply limits, clocking, and timing before finalizing the hardware design.
What is the ATTINY461A-PU pinout?
The ATTINY461A-PU uses a 20-pin PDIP package, but a complete numbered pin assignment is not established by the product-page information shown here. Use the pin-description table in the Microchip device documentation when assigning VDD, GND, reset, programming, clock, and I/O connections. The package drawing must not be used as a substitute for the electrical pin table because package orientation alone does not establish the function of every lead.
How much Flash, EEPROM, and SRAM does ATTINY461A-PU have?
ATTINY461A-PU has 4 KB of Flash, 256 bytes of EEPROM, and 256 bytes of SRAM. The Flash stores executable firmware, while EEPROM provides nonvolatile data storage and SRAM supports working variables, stack frames, and temporary buffers. According to the Microchip product page, the 4 KB Flash organization is 2K x 16. The 256-byte SRAM limit makes careful buffer and stack management important in interrupt-heavy or deeply nested firmware.
What is the maximum clock frequency of ATTINY461A-PU?
The maximum clock frequency of ATTINY461A-PU is 20 MHz. According to the Microchip product page, the device uses the AVR RISC architecture and the high-performance picoPower implementation. A 20 MHz clock provides additional timing margin for PWM generation, event counting, communication, and control-loop work, but the final operating frequency must remain consistent with the selected clock source, supply voltage, fuse configuration, and electrical limits.
Is ATTINY461A-PU suitable for industrial control and automation?
ATTINY461A-PU is suitable for compact industrial-control tasks that fit within 4 KB of firmware, 256 bytes of EEPROM, 256 bytes of SRAM, and 16 I/O lines. Its timer/counter with compare modes is useful for deterministic actuator and event timing. Before deployment, verify the exact operating-temperature range, supply limits, and any application-specific qualification requirements in the manufacturer documentation.
Can ATTINY461A-PU be used in a battery-powered embedded product?
ATTINY461A-PU can be used in a battery-powered embedded product when the firmware permits the device to spend significant time in a low-power state. The Microchip product page identifies the part as a picoPower AVR microcontroller, while the 4 KB Flash and 256-byte SRAM footprints suit compact control tasks. Actual battery life depends on the supply voltage, sleep-mode configuration, wake-up sources, peripheral activity, and leakage of the complete product.
What is the difference between ATTINY461A-PU and ATTINY461A-MU?
ATTINY461A-PU and ATTINY461A-MU share the ATtiny461A device family, but the packaging suffix identifies different physical formats: ATTINY461A-PU is specified as a 20-pin PDIP, whereas ATTINY461A-MU is a surface-mount variant. Because the footprints are not interchangeable, ATTINY461A-MU is not a drop-in replacement for an existing ATTINY461A-PU PCB. Confirm the complete ordering information and package drawing before changing the fitted part.
ATTINY461A-PU vs ATTINY261A-PU: which memory configuration is better?
ATTINY461A-PU provides 4 KB of Flash, while the compared ATTINY261A-PU configuration is listed with 2 KB of Flash. ATTINY461A-PU therefore provides twice the firmware memory, which can be valuable when interrupt routines, protocol handling, or application logic exceed the smaller device's capacity. A direct PCB substitution still requires confirmation of every peripheral and pin function; greater Flash capacity alone does not establish drop-in compatibility.
When should I choose ATTINY461A-PU over a larger 8-bit AVR microcontroller?
Choose ATTINY461A-PU when the design fits within 4 KB of Flash, 256 bytes of EEPROM, 256 bytes of SRAM, and 16 I/O lines, and a 20-pin PDIP simplifies assembly. Its 20 MHz AVR core and compare-match timer provide useful control capability without requiring a larger package. Move to a larger AVR when firmware growth, RAM pressure, pin count, communication peripherals, or production-format requirements exceed this device's resources.
What can replace ATTINY461A-PU without changing the PCB?
No drop-in replacement can be selected confidently from the available cross-reference information because no candidate was verified as both 20-pin PDIP pin-compatible and parametrically equivalent. ATTINY261A-PU and ATTINY861A-PU are related 20-pin devices, but their different memory capacities or undocumented peripheral differences prevent them from being classified as drop-in substitutes. Use the Microchip cross-reference search and compare the complete pin and peripheral tables before approving a replacement.
What is the best cross-brand equivalent for ATTINY461A-PU?
No cross-brand drop-in equivalent is established for ATTINY461A-PU because the available cross-reference results do not identify a competing device with a verified 20-pin PDIP footprint and equivalent pin functions. An AVR microcontroller from another manufacturer may provide similar application capability, but its architecture, interrupt system, timers, programming interface, and supply requirements can differ. Treat such devices as redesign candidates rather than pin-compatible replacements unless the manufacturer documents otherwise.
Where can I buy ATTINY461A-PU and check current availability?
Use the Request a Quote form on this page to ask for ATTINY461A-PU pricing, current inventory, minimum order quantity, and lead time. Quote requests allow the exact 20-pin PDIP ordering code and required quantity to be confirmed without relying on stale catalog data. Engineers should also confirm lifecycle status, authorized sourcing, and delivery timing before committing the component to a production schedule.
What is the price of ATTINY461A-PU?
The current commercial price for ATTINY461A-PU should be obtained through the Request a Quote form on this page. Because pricing depends on quantity, order breaks, inventory, and sourcing conditions, a static figure may not represent a purchasable offer for the required quantity. Submit the target quantity and any date requirements so the order can be evaluated against the exact ATTINY461A-PU ordering code.
What is the lead time and stock status for ATTINY461A-PU?
The current lead time and stock position for ATTINY461A-PU should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, scheduled production, packaging requirements, and market conditions. For a new design, request confirmation before the schematic and PCB are released so the chosen sourcing route and assembly schedule remain compatible with the production plan.

Dados de referência de engenharia para ATTINY461A-PU — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose ATTINY461A-PU when a compact embedded product needs an 8-bit AVR controller with up to 20 MHz operating speed, 4 KB of Flash, 256 bytes of EEPROM, 256 bytes of SRAM, 16 I/O lines, and a timer with compare modes. Its 20-pin PDIP package is especially convenient for prototypes, repairable electronics, and manually assembled low-volume products. Prefer it when firmware and RAM budgets fit comfortably and deterministic timer-driven control is sufficient. Move to a larger AVR when application code, serial peripherals, pin count, RAM, or connectivity requirements exceed this device's resources. ATTINY261A-PU and ATTINY861A-PU are useful family comparisons, but their different Flash capacities mean they are not automatic drop-in replacements. No alternative is presented as pin-compatible until the complete 20-pin assignment, peripheral configuration, programming method, supply range, and timing characteristics have been matched against ATTINY461A-PU.

Comparação com alternativas

Parâmetro Este produto
Brand Microchip Technology
Package 20-pin PDIP
Architecture 8-bit AVR RISC
Maximum Clock Frequency 20 MHz
Flash Memory 4 KB (2K x 16)
EEPROM Memory 256 bytes
SRAM 256 bytes
General-Purpose I/O 16 lines

Notas de projeto

Do not treat the related ATTINY461A ordering variants as automatically interchangeable with ATTINY461A-PU. The -PU version is specified in a 20-pin PDIP format, so a surface-mount ATtiny461A variant requires a different footprint and assembly process. Even devices listed in the same 20-pin package can differ in Flash capacity, peripheral allocation, reset behavior, or programming requirements. Compare every pin and peripheral function before approving a substitution.

Route sensitive timing and programming signals away from noisy switching nodes, relay drivers, motor windings, and long external harness connections. Provide local supply bypassing at the device and use a quiet ground return for reference circuitry. Through-hole lead spacing makes inspection straightforward, but it does not remove the need for common-mode filtering, surge protection, or isolation at externally accessible interfaces.

Design the power path for the device's actual operating mode rather than peak clock frequency alone. If the product uses sleep states, calculate active current, sleep current, wake-up duration, and the load current of external peripherals into a duty-cycle budget. Use the manufacturer electrical characteristics to confirm voltage limits for every clock and programming mode; do not infer operating ranges solely from the 2.5 V, 3.3 V, and 5 V supply options associated with the product listing.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The device is an industrial and commercial microcontroller rather than an automotive-qualified component. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current regulatory documentation.

Dados verificados em: 2026-11-14 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

attiny461a datasheet ATTINY461A-PU datasheet pdf ATTINY461A-PU pinout ATTINY461A-PU specifications ATTINY461A-PU equivalent ATTINY461A-PU replacement ATTINY461A-PU cross reference ATTINY461A-PU 20 pin PDIP ATTINY461A-PU price ATTINY461A-PU stock Microchip ATTINY461A-PU ATTINY461A 20MHz microcontroller

Componentes & termos relacionados

Microchip Technology ATTINY461A-PU ATTINY461A AVR RISC TinyAVR 8-bit microcontroller embedded controller semiconductor Microchip picoPower Flash memory EEPROM SRAM 20-pin PDIP DIP package through-hole package surface mount general-purpose I/O timer/counter compare-match mode industrial automation motor control sensor conditioning battery-powered instrumentation LED control household appliance control
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ