ATTINY461A-PU - 8-Bit 20MHz AVR MCU, 4KB Flash | Microchip
MPN: ATTINY461A-PU ✓ সক্রিয়ATTINY461A-PU সারাংশ
An 8-bit AVR microcontroller is a compact embedded-control device built around an AVR RISC core, on-board nonvolatile memory, and programmable digital I/O. Within the broader hierarchy of semiconductors and embedded processors, it belongs to the microcontroller class rather than the microprocessor class because the processor core, memory, timers, and I/O are integrated into one package. TinyAVR devices are commonly used for cost-sensitive embedded products where a modest instruction set, compact footprint, and deterministic control are more important than high processing bandwidth.
The ATTINY461A combines four key resources: 4 KB of Flash for firmware, 256 bytes of EEPROM for nonvolatile data, 256 bytes of SRAM for working memory, and 16 I/O pins for external control and communication. Its timer/counter includes compare-match functions that can simplify periodic event generation, pulse measurement, waveform timing, and motor or actuator control. The 20-pin PDIP format also supports straightforward manual assembly, prototyping, and insertion into conventional through-hole sockets.
At the architecture level, the AVR core provides 32 general-purpose working registers and supports an 8-bit processing model. Its 20 MHz maximum clock rate gives designers substantially more timing headroom than lower-frequency microcontrollers while retaining a small, economical package. The picoPower implementation is intended to balance operating performance with energy-conscious embedded operation, making the device suitable for products that spend substantial time in low-activity states.
Typical uses include compact motor controllers, sensor-conditioning systems, LED sequencing, small household appliances, industrial control modules, and battery-powered instrumentation. The device is particularly appropriate when the application needs deterministic timer-based control and several I/O lines but does not require a large memory capacity or a high-pin-count MCU. A low-cost 20-pin AVR can simplify the bill of materials and firmware when the required peripheral set remains modest.
Designers should verify the exact operating-voltage range, clock configuration, programming interface, and electrical limits in the Microchip device documentation before releasing the PCB. The 20-pin package leaves no mechanical allowance for an exposed thermal pad, so thermal requirements should be evaluated primarily from the specified supply voltage and operating current. Firmware development should also account for the limited 256-byte SRAM when organizing buffers and the call stack.
This product page consolidates the exact ATTINY461A-PU configuration, verified pricing references, package information, application guidance, and engineering limitations. It also distinguishes documented features from specifications that still require confirmation from the manufacturer datasheet, helping engineers make a faster and more defensible design choice.
এর জন্য ড্রপ-ইন বিকল্প ATTINY461A-PU — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible ATTINY461A-PU (একই form factor এবং footprint) — পার্থক্য রয়েছে Architecture, EEPROM Memory, Flash Memory, Mounting Type, Package.
এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।
বিকল্প অনুরোধ করুনATTINY461A-PU সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | 8-bit AVR RISC-based microcontroller |
| সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি | 20 MHz |
| Flash Memory | 4 KB (2K x 16) |
| EEPROM Memory | 256 bytes |
| SRAM | 256 bytes |
| General-Purpose I/O | 16 lines |
| General-Purpose Working Registers | 32 registers |
| Timer/Counter | 8-bit with compare modes |
| Architecture | AVR RISC |
| Low-Power Architecture | Microchip picoPower |
| প্যাকেজ | 20-pin PDIP |
| মাউন্টিং টাইপ | Through-hole |
| Operating Voltage Options | 2.5 V / 3.3 V / 5 V |
ATTINY461A-PU 20-pin pdip পিন কনফিগারেশন গাইড
ATTINY461A-PU (20-pin pdip প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ATTINY461A-PU.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
ATTINY461A-PU এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Compact Motor and Actuator Control, Industrial Sensor Conditioning, Battery-Powered Instrumentation, LED Sequencing and Lighting Control, Small Household Appliance Control, Programmable Logic and Sequence Controller.
Compact Motor and Actuator Control
ATTINY461A-PU fits compact motor-control and actuator-control products because its 20 MHz AVR core provides timing margin while 16 general-purpose I/O lines connect sensors, switches, and drive-control signals. The 8-bit timer/counter with compare modes can generate repeatable timing events or measure pulse intervals without requiring a separate timer IC. In a small pump, valve, or stepper-control board, 4 KB of firmware can hold the main state machine and control routines, while 256 bytes of EEPROM can retain calibration or configuration values. The principal constraint is memory: buffer-heavy motion algorithms should be profiled against the 256-byte SRAM limit, and motor-driver current and protection requirements must be handled outside the microcontroller.
Industrial Sensor Conditioning
ATTINY461A-PU is appropriate for compact industrial sensor-conditioning modules that must read switches, discrete sensors, or low-bandwidth analog signals through external circuitry. Its 16 I/O lines provide enough parallel connections for sensor inputs, status indicators, and a communications link, while the 8-bit timer/counter supports periodic sampling and timeout handling. The device can implement a deterministic measurement schedule, debounce control, threshold logic, and local fault flags within its 4 KB firmware budget. For factory deployments, verify the exact operating-temperature range, supply limits, isolation strategy, and EMC requirements before deployment; the microcontroller should be paired with appropriately protected input and output stages rather than connected directly to long external wiring.
Battery-Powered Instrumentation
ATTINY461A-PU can serve as the control engine in a small battery-powered instrument because the Microchip picoPower architecture is designed for energy-conscious embedded operation. A device that periodically wakes to read a sensor, update a display, transmit a result, and return to a low-power state can use the 20 MHz clock during active intervals and benefit from the limited 256-byte SRAM footprint. The 4 KB program memory is adequate for concise measurement and state-management routines, while 256 bytes of EEPROM can store user settings or calibration factors. Actual run time must be calculated from the selected supply voltage, sleep mode, wake-up events, analog front end, radio activity, and leakage across the complete product rather than from microcontroller specifications alone.
LED Sequencing and Lighting Control
ATTINY461A-PU is well suited to LED sequencing, status panels, and decorative lighting controllers because 16 I/O lines can drive multiple channels and the compare-match timer can establish periodic update events. Firmware can implement dimming patterns, fade effects, fault blinking, and button-controlled modes without an external timing controller. The 20-pin PDIP package is particularly convenient for prototypes and manually assembled products. Each LED channel still needs appropriate current limiting and, for large loads, transistor or constant-current drive circuitry. Since Flash and SRAM are intentionally modest, elaborate animation buffers should be generated on the fly rather than stored as large frame arrays, which helps keep stack and runtime memory usage controlled.
Small Household Appliance Control
ATTINY461A-PU can provide the primary control logic in a small household appliance such as a fan controller, simple thermostat, timer, or valve manager. The AVR core executes a deterministic state machine, the timer/counter supports scheduled events, and the 16 I/O lines accommodate buttons, display signals, relays, and safety inputs. Four kilobytes of Flash can hold a focused application and nonvolatile configuration storage, while 256 bytes of SRAM is adequate for compact working states. The design must isolate relay or motor transients from the microcontroller, provide appropriate low-voltage cutoffs, and confirm the exact operating-voltage and temperature limits. A through-hole PDIP package also supports repairable products and low-volume manual assembly.
Programmable Logic and Sequence Controller
ATTINY461A-PU is useful as a small programmable sequence controller for equipment with discrete inputs and outputs. Engineers can encode operating steps, interlocks, timing windows, counters, and diagnostic codes in its 4 KB firmware space, using the 8-bit timer/counter to manage repeatable delays and the 16 I/O lines to read sensors and command actuators. EEPROM can preserve selected settings across power cycles, although the 256-byte capacity requires careful data-format design. The 20 MHz clock supports responsive state transitions, yet the design should minimize blocking delays because they reduce responsiveness to asynchronous inputs. Production use should include startup-state validation, safe outputs during reset, brownout review, and fault behavior for every safety-relevant actuator.
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ATTINY461A-PU — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য |
|---|---|
| Brand | Microchip Technology |
| Package | 20-pin PDIP |
| Architecture | 8-bit AVR RISC |
| Maximum Clock Frequency | 20 MHz |
| Flash Memory | 4 KB (2K x 16) |
| EEPROM Memory | 256 bytes |
| SRAM | 256 bytes |
| General-Purpose I/O | 16 lines |
ডিজাইন নোট
Do not treat the related ATTINY461A ordering variants as automatically interchangeable with ATTINY461A-PU. The -PU version is specified in a 20-pin PDIP format, so a surface-mount ATtiny461A variant requires a different footprint and assembly process. Even devices listed in the same 20-pin package can differ in Flash capacity, peripheral allocation, reset behavior, or programming requirements. Compare every pin and peripheral function before approving a substitution.
Route sensitive timing and programming signals away from noisy switching nodes, relay drivers, motor windings, and long external harness connections. Provide local supply bypassing at the device and use a quiet ground return for reference circuitry. Through-hole lead spacing makes inspection straightforward, but it does not remove the need for common-mode filtering, surge protection, or isolation at externally accessible interfaces.
Design the power path for the device's actual operating mode rather than peak clock frequency alone. If the product uses sleep states, calculate active current, sleep current, wake-up duration, and the load current of external peripherals into a duty-cycle budget. Use the manufacturer electrical characteristics to confirm voltage limits for every clock and programming mode; do not infer operating ranges solely from the 2.5 V, 3.3 V, and 5 V supply options associated with the product listing.
কমপ্লায়েন্স তথ্য
The device is an industrial and commercial microcontroller rather than an automotive-qualified component. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current regulatory documentation.