ATTINY461A-SU 20MHz 8-bit AVR MCU | Microchip Technology
N.º da peça: ATTINY461A-SU ✓ AtivoATTINY461A-SU Visão geral
An 8-bit AVR microcontroller is a compact embedded-control device combining a RISC processor core, program Flash, data EEPROM, SRAM, timers, and serial peripherals on one integrated circuit. The ATTINY461A belongs to the ATtiny family and is positioned for small control systems that require deterministic embedded processing without the resources of a larger microcontroller. Its combination of 16 I/O lines and 20 MHz operation supports compact motor, sensing, communication, and general-purpose control designs.
Key features include 4 KB of in-system programmable Flash memory, 256 bytes of EEPROM, 256 bytes of SRAM, and 32 general-purpose working registers. The microcontroller also provides an 8-bit timer/counter with compare modes and operates from a low-voltage supply range identified as 1.8 V to 5.5 V in the comparison material. The 20-pin SOIC package makes the device suitable for conventional through-hole-compatible PCB layouts and hand-soldered prototypes.
The AVR architecture provides a compact instruction set and hardware features suitable for embedded control. Flash memory stores firmware, EEPROM is intended for nonvolatile parameter or calibration storage, and SRAM supports stack and working data. The 16 I/O lines allow the device to interface with sensors, actuators, indicators, and serial peripherals while keeping the design focused on low-cost, low-power embedded systems.
Typical applications include small motor controllers, sensor nodes, battery-powered instruments, LED control, simple serial interfaces, and compact industrial control modules. For a design using the ATTINY461A-SU, verify the pin assignments, peripheral multiplexing, clock requirements, programming interface, and supply limits against the manufacturer datasheet before laying out the PCB.
When replacing an existing ATTINY461A design, confirm the SOIC footprint, operating-voltage requirements, firmware compatibility, and exact peripheral assignments. The -SU suffix denotes the tube-packaging ordering variant identified in the product data, while the functional device is the ATTINY461A family member.
This product page organizes the verified ATTINY461A-SU specifications, package information, practical design notes, and comparison options around the 20-pin SOIC implementation. It is intended to help engineers move from datasheet selection to PCB layout, firmware integration, and sourcing without relying on assumptions about unspecified electrical details.
Alternativas drop-in para ATTINY461A-SU — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com ATTINY461A-SU (mesmo formato e footprint) — diferindo em Architecture, EEPROM, Flash Memory, Package, Timer/Counter.
ATTINY261A-SUR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ATTINY261-20SU
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ATTINY261V-10SU
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ATTINY861A-SU
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ATTINY1617-MF
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ATTINY461A-SU Classificações máximas e características elétricas
| Product Type | 8-bit AVR RISC-based microcontroller |
| Frequência máxima de clock | 20 MHz |
| Flash Memory | 4 KB |
| Flash Organization | 2K x 16 bits |
| EEPROM | 256 bytes |
| SRAM | 256 bytes |
| General-Purpose I/O Lines | 16 |
| General-Purpose Working Registers | 32 |
| Timer/Counter | 8-bit with compare modes |
| Supply Voltage Range | 1.8 V to 5.5 V |
| Encapsulamento | 20-pin SOIC |
| Architecture | AVR |
| Programming | In-system programmable Flash |
| Tipo de montagem | Surface mount |
| Ordering/Packaging Suffix | -SU, tube packaging |
Configuração de pinos do ATTINY461A-SU
| Pino 1 | PA0 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table |
| Pino 2 | PA1 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table |
| Pino 3 | PA2 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table |
| Pino 4 | PA3 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table |
| Pino 5 | PA4 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table |
| Pino 6 | PA5 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table |
| Pino 7 | PA6 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table |
| Pino 8 | PA7 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table |
| Pino 9 | PB0 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table |
| Pino 10 | PB1 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table |
| Pino 11 | PB2 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table |
| Pino 12 | PB3 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table |
| Pino 13 | PB4 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table |
| Pino 14 | PB5 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table |
| Pino 15 | PB6 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table |
| Pino 16 | PB7 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table |
| Pino 17 | VCC — Power supply input |
| Pino 18 | GND — Ground |
| Pino 19 | XTAL1 — Oscillator or clock input; exact alternate-function assignment requires the manufacturer pin table |
| Pino 20 | XTAL2 — Oscillator or clock output; exact alternate-function assignment requires the manufacturer pin table |
Aplicações típicas
ATTINY461A-SU é adequado para 6 aplicaçãos: Battery-Powered Sensor Nodes, Small Motor Control, LED Lighting and Display Control, Simple Serial Data Acquisition, Compact Industrial Control Module, Programmable Instrument Controller.
Battery-Powered Sensor Nodes
The ATTINY461A-SU fits compact battery-powered sensor nodes because it combines a 20 MHz AVR core with 16 general-purpose I/O lines while operating across the identified 1.8 V to 5.5 V range. Its 4 KB Flash store can hold the acquisition, filtering, and communication firmware, while 256 bytes of EEPROM can retain calibration or configuration values. Place the device between the sensor interface and a low-power serial transceiver, then use its I/O pins for sensor enables, interrupt signals, and status indicators. The engineering trade-off is SRAM capacity: 256 bytes is adequate for many sampling and control loops but requires compact buffering and careful stack allocation in more complex processing tasks.
Recomendado
Small Motor Control
The ATTINY461A-SU is suitable for small brushed-motor or actuator-control systems where an 8-bit timer/counter with compare modes, 16 I/O lines, and 20 MHz processing are useful. The controller can generate timing references, read position or limit sensors, and control transistor-driver inputs without occupying a large logic footprint. Its 4 KB of Flash provides more program space than the 2 KB attributed to ATTINY261A-SUR, which can help when combining motor timing, fault handling, and communication routines. Designers should confirm the selected timer channels and pin multiplexing in the datasheet, and must add suitable driver transistors, flyback protection, and current sensing for inductive loads.
Recomendado
LED Lighting and Display Control
The ATTINY461A-SU can manage LED status indicators, decorative lighting, or small segmented-display subsystems using its 16 general-purpose I/O lines and 8-bit timer/counter with compare modes. The timer can establish repeatable intervals for blinking, dimming, or scan patterns, while firmware can apply button logic and fault reporting. Its 256 bytes of SRAM are suitable for compact display-state management, and 4 KB of Flash allows animation or sequencing tables to coexist with control code. For LED currents beyond microcontroller-pin limits, use constant-current drivers and separate the power path from sensitive logic grounding. Verify which timer outputs and port pins are available on the 20-pin SOIC before allocating display functions.
Recomendado
Simple Serial Data Acquisition
The ATTINY461A-SU supports small data-acquisition and protocol-conversion designs that need deterministic timing, serial interfacing, and modest firmware storage. Its 20 MHz clock provides useful timing margin for sampling and byte-level communication, while 16 I/O lines allow digital inputs, status outputs, and serial functions to be combined. The 4 KB Flash capacity is more suitable for multi-function acquisition firmware than the 2 KB listed for ATTINY261A-SUR. Buffer management remains important because only 256 bytes of SRAM are available. Engineers should use interrupt-driven transfers, avoid unnecessary copying, and verify the exact USART, TWI, or USI pin assignments required by the selected peripheral in the manufacturer documentation.
Recomendado
Compact Industrial Control Module
The ATTINY461A-SU is appropriate for compact industrial control modules that coordinate switches, relays, interlocks, and status reporting. Its 16 I/O lines can interface with discrete sensors and output stages, while the 20 MHz AVR core supports debouncing, state-machine logic, and communication tasks. The 1.8 V to 5.5 V operating range allows integration with multiple embedded supply architectures, and the 20-pin SOIC package simplifies assembly using standard surface-mount practices. For industrial environments, validate transient immunity, isolation, grounding, and actuator protection independently of the microcontroller rating. The device should remain isolated from high-energy switching paths, with suitable protection networks placed at every external interface.
Recomendado
Programmable Instrument Controller
The ATTINY461A-SU can serve as the local controller in a compact programmable instrument or test fixture. It can sequence relays, configure switches, monitor status inputs, and manage a simple front panel through its 16 I/O lines. Its 4 KB Flash capacity is valuable when firmware must combine timing, calibration logic, and a serial command interface, while 256 bytes of EEPROM can retain device settings. The 20 MHz clock supports responsive command handling and timing routines. Designers should divide code carefully because 256 bytes of SRAM constrains complex buffering, and they should use the datasheet pin table to ensure exposed peripheral functions do not conflict with panel or instrument-control signals.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ATTINY461A-SU — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ATTINY261A-SUR | ATTINY261-20SU | ATTINY261V-10SU | ATTINY861A-SU | ATTINY1617-MF |
|---|---|---|---|---|---|---|
| Package | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Architecture | 8-bit AVR | 8-bit AVR | 8-bit AVR RISC | AVR | AVR | 8-bit AVR |
Principais diferenciais
- Larger Flash budget than the ATTINY261A-SUR comparison candidate (vs ATTINY261A-SUR)
- Higher stated clock frequency than ATTINY1617-MF (vs ATTINY1617-MF)
- Larger memory configuration than the ATTINY261-20SU comparison candidate (vs ATTINY261-20SU)
Notas de projeto
Route the ATTINY461A-SU power and ground connections directly to the device pins, place the required bypass capacitor close to the supply pin, and keep high-current switching paths away from sensitive input traces. The 20-pin SOIC footprint has fine-pitch leads, so use a land pattern and solder profile approved for the assembly process. Confirm exposed pad requirements from the selected package drawing before releasing artwork.
Design the supply for the exact 1.8 V to 5.5 V operating range, including startup and transient conditions rather than only the nominal voltage. If the MCU is powered from a battery, separate the regulated digital rail from loads that can create large transients. Use local decoupling and verify brownout and clock behavior in the manufacturer datasheet before relying on the device during battery discharge.
Do not select ATTINY261A-SUR or ATTINY261-20SU as an identical substitute for ATTINY461A-SU because the published comparison identifies 2 KB of Flash rather than 4 KB. Firmware images that fit 4 KB may not fit 2 KB, and related family members can differ in timer channels, serial peripherals, and pin multiplexing. Validate the complete pin description and memory map in the replacement device datasheet.
Assign oscillator, programming, reset, and communication signals according to the manufacturer pin-description table before laying out the PCB. Keep the oscillator loop compact and away from switching-node copper, and reserve the programming interface with accessible test pads if the enclosure allows. Because several I/O pins can have alternate peripheral functions, document fixed pin reservations in the schematic to prevent conflicts during firmware updates.
For serial links and sensor inputs, define edge rates and termination based on the connected peripheral rather than on the 20 MHz CPU clock. Keep external interfaces away from the clock and supply-return paths, and add series damping where signal-integrity analysis shows it is needed. Firmware should debounce mechanical inputs and validate sensor levels before using them for control decisions.
Informações de conformidade
No explicit compliance declarations were identified for the exact ATTINY461A-SU ordering code in the referenced product listings. Use the manufacturer product documentation for current environmental and material-compliance status.