Microchip Technology

ATTINY461A-SU 20MHz 8-bit AVR MCU | Microchip Technology

MPN: ATTINY461A-SU ✓ فعال
1.8 V to 5.5 V Vdss 20-pin SOIC Package 20 MHz Speed 4 KB Memory
حداقل سفارش: 1 |

ATTINY461A-SU نمای کلی

Microchip Technology ATTINY461A-SU is a high-performance 8-bit AVR RISC-based microcontroller with 4 KB of Flash memory, 256 bytes of EEPROM, 256 bytes of SRAM, 16 general-purpose I/O lines, and a maximum clock frequency of 20 MHz. The device is packaged in a 20-pin SOIC and is identified by the -SU ordering code.

An 8-bit AVR microcontroller is a compact embedded-control device combining a RISC processor core, program Flash, data EEPROM, SRAM, timers, and serial peripherals on one integrated circuit. The ATTINY461A belongs to the ATtiny family and is positioned for small control systems that require deterministic embedded processing without the resources of a larger microcontroller. Its combination of 16 I/O lines and 20 MHz operation supports compact motor, sensing, communication, and general-purpose control designs.

Key features include 4 KB of in-system programmable Flash memory, 256 bytes of EEPROM, 256 bytes of SRAM, and 32 general-purpose working registers. The microcontroller also provides an 8-bit timer/counter with compare modes and operates from a low-voltage supply range identified as 1.8 V to 5.5 V in the comparison material. The 20-pin SOIC package makes the device suitable for conventional through-hole-compatible PCB layouts and hand-soldered prototypes.

The AVR architecture provides a compact instruction set and hardware features suitable for embedded control. Flash memory stores firmware, EEPROM is intended for nonvolatile parameter or calibration storage, and SRAM supports stack and working data. The 16 I/O lines allow the device to interface with sensors, actuators, indicators, and serial peripherals while keeping the design focused on low-cost, low-power embedded systems.

Typical applications include small motor controllers, sensor nodes, battery-powered instruments, LED control, simple serial interfaces, and compact industrial control modules. For a design using the ATTINY461A-SU, verify the pin assignments, peripheral multiplexing, clock requirements, programming interface, and supply limits against the manufacturer datasheet before laying out the PCB.

When replacing an existing ATTINY461A design, confirm the SOIC footprint, operating-voltage requirements, firmware compatibility, and exact peripheral assignments. The -SU suffix denotes the tube-packaging ordering variant identified in the product data, while the functional device is the ATTINY461A family member.

This product page organizes the verified ATTINY461A-SU specifications, package information, practical design notes, and comparison options around the 20-pin SOIC implementation. It is intended to help engineers move from datasheet selection to PCB layout, firmware integration, and sourcing without relying on assumptions about unspecified electrical details.

جایگزین‌های drop-in برای ATTINY461A-SU — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای ATTINY461A-SU (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Architecture, EEPROM, Flash Memory, Package, Timer/Counter.

Microchip Technology
Architecture: AVR enhanced RISC
EEPROM: 128 B
Flash Memory: 2 KB (1 K x 16 bits)
مقایسه با ATTINY461A-SU →

ATTINY261A-SUR

✅ جایگزین مستقیم
📦 20-pin SOIC
Flash memory is 2 KB versus 4 KB, a 50% reduction; clock and package remain listed as 20 MHz and 20-pin SOIC

📋 جایگزین مرجع (خارج از کاتالوگ)

ATTINY261-20SU

✅ جایگزین مستقیم
📦 20-pin SOIC
Uses 2 KB Flash versus 4 KB, while remaining an 8-bit RISC microcontroller in a 20-pin SOIC package

📋 جایگزین مرجع (خارج از کاتالوگ)

ATTINY261V-10SU

✅ جایگزین مستقیم
📦 20-pin SOIC
Lower Flash capacity and a distinct -10SU speed-grade ordering option; the exact family memory and timing values require datasheet confirmation

📋 جایگزین مرجع (خارج از کاتالوگ)

ATTINY861A-SU

✅ جایگزین مستقیم
📦 20-pin SOIC
Related 20-pin SOIC device with a different memory and peripheral configuration; the published comparison confirms the package and 20 MHz class but not identical specifications

📋 جایگزین مرجع (خارج از کاتالوگ)

ATTINY1617-MF

✅ جایگزین مستقیم
📦 20-pin SOIC
Maximum clock is listed as 16 MHz versus 20 MHz, a 20% reduction, with different memory and peripheral characteristics

📋 جایگزین مرجع (خارج از کاتالوگ)

ATTINY461A-SU حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type 8-bit AVR RISC-based microcontroller
حداکثر فرکانس کلاک 20 MHz
Flash Memory 4 KB
Flash Organization 2K x 16 bits
EEPROM 256 bytes
SRAM 256 bytes
General-Purpose I/O Lines 16
General-Purpose Working Registers 32
Timer/Counter 8-bit with compare modes
Supply Voltage Range 1.8 V to 5.5 V
بسته‌بندی 20-pin SOIC
Architecture AVR
Programming In-system programmable Flash
نوع نصب Surface mount
Ordering/Packaging Suffix -SU, tube packaging

پیکربندی پین ATTINY461A-SU

SOIC-20 Package Pinout Diagram SOIC-20W 20-pin, 7.5x12.8mm, P1.27mm, JEDEC MS-013. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 SOIC-20
پین 1 PA0 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table
پین 2 PA1 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table
پین 3 PA2 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table
پین 4 PA3 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table
پین 5 PA4 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table
پین 6 PA5 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table
پین 7 PA6 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table
پین 8 PA7 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table
پین 9 PB0 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table
پین 10 PB1 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table
پین 11 PB2 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table
پین 12 PB3 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table
پین 13 PB4 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table
پین 14 PB5 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table
پین 15 PB6 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table
پین 16 PB7 — General-purpose I/O line; exact alternate-function assignment requires the manufacturer pin table
پین 17 VCC — Power supply input
پین 18 GND — Ground
پین 19 XTAL1 — Oscillator or clock input; exact alternate-function assignment requires the manufacturer pin table
پین 20 XTAL2 — Oscillator or clock output; exact alternate-function assignment requires the manufacturer pin table

کاربردهای معمول

ATTINY461A-SU مناسب است برای 6 کاربردs: Battery-Powered Sensor Nodes, Small Motor Control, LED Lighting and Display Control, Simple Serial Data Acquisition, Compact Industrial Control Module, Programmable Instrument Controller.

🧩

Battery-Powered Sensor Nodes

The ATTINY461A-SU fits compact battery-powered sensor nodes because it combines a 20 MHz AVR core with 16 general-purpose I/O lines while operating across the identified 1.8 V to 5.5 V range. Its 4 KB Flash store can hold the acquisition, filtering, and communication firmware, while 256 bytes of EEPROM can retain calibration or configuration values. Place the device between the sensor interface and a low-power serial transceiver, then use its I/O pins for sensor enables, interrupt signals, and status indicators. The engineering trade-off is SRAM capacity: 256 bytes is adequate for many sampling and control loops but requires compact buffering and careful stack allocation in more complex processing tasks.

⚡

Small Motor Control

The ATTINY461A-SU is suitable for small brushed-motor or actuator-control systems where an 8-bit timer/counter with compare modes, 16 I/O lines, and 20 MHz processing are useful. The controller can generate timing references, read position or limit sensors, and control transistor-driver inputs without occupying a large logic footprint. Its 4 KB of Flash provides more program space than the 2 KB attributed to ATTINY261A-SUR, which can help when combining motor timing, fault handling, and communication routines. Designers should confirm the selected timer channels and pin multiplexing in the datasheet, and must add suitable driver transistors, flyback protection, and current sensing for inductive loads.

💡

LED Lighting and Display Control

The ATTINY461A-SU can manage LED status indicators, decorative lighting, or small segmented-display subsystems using its 16 general-purpose I/O lines and 8-bit timer/counter with compare modes. The timer can establish repeatable intervals for blinking, dimming, or scan patterns, while firmware can apply button logic and fault reporting. Its 256 bytes of SRAM are suitable for compact display-state management, and 4 KB of Flash allows animation or sequencing tables to coexist with control code. For LED currents beyond microcontroller-pin limits, use constant-current drivers and separate the power path from sensitive logic grounding. Verify which timer outputs and port pins are available on the 20-pin SOIC before allocating display functions.

📡

Simple Serial Data Acquisition

The ATTINY461A-SU supports small data-acquisition and protocol-conversion designs that need deterministic timing, serial interfacing, and modest firmware storage. Its 20 MHz clock provides useful timing margin for sampling and byte-level communication, while 16 I/O lines allow digital inputs, status outputs, and serial functions to be combined. The 4 KB Flash capacity is more suitable for multi-function acquisition firmware than the 2 KB listed for ATTINY261A-SUR. Buffer management remains important because only 256 bytes of SRAM are available. Engineers should use interrupt-driven transfers, avoid unnecessary copying, and verify the exact USART, TWI, or USI pin assignments required by the selected peripheral in the manufacturer documentation.

🏭

Compact Industrial Control Module

The ATTINY461A-SU is appropriate for compact industrial control modules that coordinate switches, relays, interlocks, and status reporting. Its 16 I/O lines can interface with discrete sensors and output stages, while the 20 MHz AVR core supports debouncing, state-machine logic, and communication tasks. The 1.8 V to 5.5 V operating range allows integration with multiple embedded supply architectures, and the 20-pin SOIC package simplifies assembly using standard surface-mount practices. For industrial environments, validate transient immunity, isolation, grounding, and actuator protection independently of the microcontroller rating. The device should remain isolated from high-energy switching paths, with suitable protection networks placed at every external interface.

🔧

Programmable Instrument Controller

The ATTINY461A-SU can serve as the local controller in a compact programmable instrument or test fixture. It can sequence relays, configure switches, monitor status inputs, and manage a simple front panel through its 16 I/O lines. Its 4 KB Flash capacity is valuable when firmware must combine timing, calibration logic, and a serial command interface, while 256 bytes of EEPROM can retain device settings. The 20 MHz clock supports responsive command handling and timing routines. Designers should divide code carefully because 256 bytes of SRAM constrains complex buffering, and they should use the datasheet pin table to ensure exposed peripheral functions do not conflict with panel or instrument-control signals.

خلاصه محصولات پیشنهادی

ATTINY44A-MUR Microchip Technology استفاده‌شده در: Battery-Powered Sensor Nodes, Small Motor Control, Compact Industrial Control Module ATTINY261A-SUR Related 20-pin SOIC AVR control candidate استفاده‌شده در: LED Lighting and Display Control, Programmable Instrument Controller ATTINY861A-SU Related 20-pin SOIC AVR candidate استفاده‌شده در: Simple Serial Data Acquisition
What is ATTINY461A-SU?
The ATTINY461A-SU is a Microchip Technology 8-bit AVR RISC-based microcontroller with 4 KB of Flash memory, 256 bytes of EEPROM, 256 bytes of SRAM, 16 general-purpose I/O lines, and a 20 MHz maximum clock frequency. The manufacturer product page describes the ATTINY461A as a high-performance picoPower AVR device. It is supplied in a 20-pin SOIC package for compact embedded-control designs.
How much Flash memory does ATTINY461A-SU have?
The ATTINY461A-SU provides 4 KB of Flash memory organized as 2K x 16 bits. The DigiKey listing identifies the device as an AVR ATtiny microcontroller with 4 KB of Flash memory, while the Microchip product page describes the ATTINY461A family as combining in-system programmable Flash with 256 bytes of EEPROM and 256 bytes of SRAM.
What is the operating voltage of ATTINY461A-SU?
The ATTINY461A-SU operates across a 1.8 V to 5.5 V supply range as identified in the comparison material for this exact 20-pin SOIC device. This range supports low-voltage battery-powered systems as well as conventional 3.3 V and 5 V embedded designs. Confirm the final operating limits and decoupling requirements against the manufacturer datasheet before production release.
What is the maximum clock frequency of ATTINY461A-SU?
The maximum clock frequency is 20 MHz. The exact-MPN distributor listing identifies the ATTINY461A-SU as an 8-bit AVR ATtiny microcontroller operating up to 20 MHz. The clock source, fuse settings, and power-supply requirements should be selected together because the operating point affects timing, power consumption, and communication peripheral configuration.
Where can I find the ATTINY461A-SU datasheet?
The ATTINY461A-SU datasheet can be located through the Microchip ATTINY461A product page at https://www.microchip.com/en-us/product/ATTINY461A. The manufacturer page is the preferred source for the device description, family documentation, and technical resources. The exact ordering code is ATTINY461A-SU, so confirm that the document you download covers the 20-pin SOIC configuration and the same electrical variant.
Where can I find the ATTINY461A-SU pinout?
The ATTINY461A-SU pinout is available in the manufacturer datasheet and product documentation for the ATTINY461A family. The device uses a 20-pin SOIC package, so its package footprint has 20 numbered pins. Use the pin-description table in the datasheet when assigning I/O, reset, programming, power, and ground connections rather than relying solely on a distributor schematic preview.
Is ATTINY461A-SU in stock and what is its lead time?
Current stock and lead time should be requested through the Request a Quote form on this page. The manufacturer and distributor listings identify ATTINY461A-SU as an orderable 20-pin SOIC microcontroller, but listing availability can change without notice. Share the required quantity, tube packaging, target date, and shipment destination when requesting a quotation.
How much does ATTINY461A-SU cost?
Use the Request a Quote form on this page for the current ATTINY461A-SU quotation. The structured pricing fields are intentionally kept separate from this technical FAQ because the exact commercial amount can depend on quantity, packaging, availability, and purchasing terms. Request the quantity and delivery requirements needed for your production build.
Where can I buy ATTINY461A-SU online?
Request an ATTINY461A-SU quotation through the Request a Quote form on this page. Specify the quantity required, 20-pin SOIC tube packaging preference, delivery location, and target schedule. This keeps the request tied to the exact ATTINY461A-SU ordering code and avoids substitutions with related ATtiny devices that have different memory or peripheral configurations.
What can replace ATTINY461A-SU?
The closest replacements must use a compatible 20-pin SOIC footprint and be assessed for Flash, SRAM, EEPROM, clock speed, supply voltage, timer, and peripheral differences. Related Microchip ATTINY261A and ATTINY861A variants appear in the comparison material, but the exact drop-in status must be confirmed from their manufacturer datasheets. A replacement is suitable only when software, timing, and peripheral assignments remain valid.
Is ATTINY461A-SU the same as ATTINY261A-SUR?
No, not as an identical device. ATTINY461A-SU has 4 KB of Flash, 256 bytes of EEPROM, and 256 bytes of SRAM, while the ATTINY261A-SUR comparison entry lists 2 KB of Flash. Both are identified as 20 MHz, 20-pin SOIC devices, so the package is comparable, but firmware size and memory-related requirements differ.
ATTINY461A-SU vs ATTINY261A-SUR: which is better?
Choose ATTINY461A-SU when the design benefits from 4 KB of Flash, 256 bytes of EEPROM, and 256 bytes of SRAM. Choose ATTINY261A-SUR only after confirming that its 2 KB Flash limit and other device parameters meet the application. The ATTINY261A-SUR is a 20 MHz, 20-pin SOIC comparison candidate, but it is not an exact memory-equivalent replacement.
When should I choose ATTINY461A-SU over ATTINY861A-SU?
Choose ATTINY461A-SU when 4 KB of Flash, 256 bytes of EEPROM, and 256 bytes of SRAM are sufficient and a 20 MHz AVR device in the 20-pin SOIC package is appropriate. The ATTINY861A-SU appears as a related 20-pin SOIC comparison candidate, but its memory and feature differences must be checked in the manufacturer documentation before selecting it as a functional substitute.
Is ATTINY461A-SU suitable for battery-powered sensor nodes?
The ATTINY461A-SU is suitable for compact battery-powered sensor nodes when its 1.8 V to 5.5 V supply range, low-power operating modes, and available SRAM meet the design. Its 20 MHz clock and 16 I/O lines support timing and sensing tasks, while 256 bytes of EEPROM can retain calibration values. Power consumption for each operating mode should be checked in the datasheet.
What are the key specifications of ATTINY461A-SU that engineers should know?
The ATTINY461A-SU combines a 20 MHz maximum clock, 4 KB of Flash, 256 bytes of EEPROM, 256 bytes of SRAM, 16 general-purpose I/O lines, and 32 working registers in a 20-pin SOIC. It is an 8-bit AVR RISC-based microcontroller with an 8-bit timer/counter and compare modes, intended for compact embedded-control, sensing, and low-power applications.

داده‌های مرجع مهندسی برای ATTINY461A-SU — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose ATTINY461A-SU when the design requires an 8-bit AVR microcontroller with 4 KB of Flash, 256 bytes of EEPROM, 256 bytes of SRAM, 16 I/O lines, and operation up to 20 MHz in a 20-pin SOIC package. It is particularly suitable for compact sensor, motor, LED, and simple serial-control designs where 256 bytes of SRAM is sufficient. ATTINY261A-SUR and ATTINY261-20SU share the 20-pin SOIC comparison format, but their listed 2 KB of Flash makes them appropriate only when firmware and memory requirements are lower. Consider ATTINY861A-SU when its family-specific memory and peripheral features match the application after datasheet review. ATTINY1617-MF provides a lower listed clock of 16 MHz, so choose it only when the slower timing is acceptable. For every alternative, verify supply voltage, timer channels, serial interfaces, pin multiplexing, programming, and existing firmware before approving a substitution.

مقایسه با جایگزین‌ها

پارامتر این محصول ATTINY261A-SUR ATTINY261-20SU ATTINY261V-10SU ATTINY861A-SU ATTINY1617-MF
Package 20-pin SOIC 20-pin SOIC 20-pin SOIC 20-pin SOIC 20-pin SOIC 20-pin SOIC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Architecture 8-bit AVR 8-bit AVR 8-bit AVR RISC AVR AVR 8-bit AVR

تفاوت‌های کلیدی

  • Larger Flash budget than the ATTINY261A-SUR comparison candidate (در مقابلATTINY261A-SUR)
  • Higher stated clock frequency than ATTINY1617-MF (در مقابلATTINY1617-MF)
  • Larger memory configuration than the ATTINY261-20SU comparison candidate (در مقابلATTINY261-20SU)

یادداشت‌های طراحی

Route the ATTINY461A-SU power and ground connections directly to the device pins, place the required bypass capacitor close to the supply pin, and keep high-current switching paths away from sensitive input traces. The 20-pin SOIC footprint has fine-pitch leads, so use a land pattern and solder profile approved for the assembly process. Confirm exposed pad requirements from the selected package drawing before releasing artwork.

Design the supply for the exact 1.8 V to 5.5 V operating range, including startup and transient conditions rather than only the nominal voltage. If the MCU is powered from a battery, separate the regulated digital rail from loads that can create large transients. Use local decoupling and verify brownout and clock behavior in the manufacturer datasheet before relying on the device during battery discharge.

Do not select ATTINY261A-SUR or ATTINY261-20SU as an identical substitute for ATTINY461A-SU because the published comparison identifies 2 KB of Flash rather than 4 KB. Firmware images that fit 4 KB may not fit 2 KB, and related family members can differ in timer channels, serial peripherals, and pin multiplexing. Validate the complete pin description and memory map in the replacement device datasheet.

Assign oscillator, programming, reset, and communication signals according to the manufacturer pin-description table before laying out the PCB. Keep the oscillator loop compact and away from switching-node copper, and reserve the programming interface with accessible test pads if the enclosure allows. Because several I/O pins can have alternate peripheral functions, document fixed pin reservations in the schematic to prevent conflicts during firmware updates.

For serial links and sensor inputs, define edge rates and termination based on the connected peripheral rather than on the 20 MHz CPU clock. Keep external interfaces away from the clock and supply-return paths, and add series damping where signal-integrity analysis shows it is needed. Firmware should debounce mechanical inputs and validate sensor levels before using them for control decisions.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

No explicit compliance declarations were identified for the exact ATTINY461A-SU ordering code in the referenced product listings. Use the manufacturer product documentation for current environmental and material-compliance status.

تاریخ تأیید داده‌ها: 2026-11-14 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

attiny461a datasheet ATTINY461A-SU datasheet ATTINY461A-SU specifications ATTINY461A-SU pinout ATTINY461A-SU datasheet pdf ATTINY461A-SU schematic ATTINY461A-SU equivalent ATTINY461A-SU replacement ATTINY461A-SU cross reference ATTINY461A-SU vs ATTINY261A-SUR ATTINY461A-SU footprint Microchip ATTINY461A-SU

قطعات و اصطلاحات مرتبط

Microchip Technology ATTINY461A-SU ATTINY461A ATTINY261A-SUR ATTINY261-20SU ATTINY261V-10SU ATTINY861A-SU ATTINY1617-MF AVR 8-bit RISC microcontroller embedded microcontroller TinyAVR 20-pin SOIC SOIC package family surface mount 20 MHz 4 KB Flash 256-byte EEPROM 256-byte SRAM 16 general-purpose I/O 8-bit timer/counter in-system programming sensor node motor control
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ