Microchip Technology

ATXMEGA128B3-MH - 32MHz 128KB Flash AVR MCU | Microchip

N.º da peça: ATXMEGA128B3-MH ✓ Ativo
1.6 V to 3.6 V Vdss 64-QFN (9 x 9 mm) with exposed pad Package 32 MHz Speed 128 KB (128K x 8) Memory
MOQ: 1 |

ATXMEGA128B3-MH Visão geral

The Microchip Technology ATXMEGA128B3-MH is a low-power, high-performance 8/16-bit AVR XMEGA B3 microcontroller with a 32 MHz operating frequency, 128 KB of self-programming flash memory, 4 KB SRAM, 2048 bytes of EEPROM, and USB full-speed device support. It is packaged for surface-mount assembly in a 64-QFN 9 x 9 mm package with an exposed thermal pad. The operating voltage range is 1.6 V to 3.6 V.

An 8/16-bit AVR microcontroller is an embedded processing device that combines a RISC-style CPU core, nonvolatile program memory, data memory, and peripherals on one integrated circuit. The ATXMEGA128B3 family belongs to the hierarchy of 8/16-bit AVR microcontrollers, embedded controllers, and semiconductor components. Its combination of USB connectivity, event-system peripherals, direct-memory-access support, and mixed signal resources makes it suitable for compact control systems that require more processing and memory than a basic 8-bit MCU.

Key device resources include 128 KB of self-programming flash, a separate 4 KB boot-code section, 4 KB of SRAM, and 2048 bytes of EEPROM. The integrated USB full-speed device interface enables USB communication without an external controller. A two-channel DMA controller and four-channel event system support data movement and deterministic peripheral triggering, while the analog and timer resources enable practical acquisition, control, and communication functions.

The ATXMEGA128B3-MH is built around Microchip's AVR architecture and runs at up to 32 MHz, providing substantially greater application-code capacity and processing performance than entry-level 8-bit AVR devices. Its 1.6 V to 3.6 V supply range supports low-voltage portable and embedded systems. The 64-QFN 9 x 9 mm package offers a compact land pattern but requires careful PCB layout for its exposed thermal pad and high-speed signal integrity.

Typical uses include USB-connected data acquisition, industrial control modules, compact instrumentation, touch-capacitive interfaces, communication equipment, and embedded consumer products. The device is particularly appropriate when a board needs local USB connectivity, moderate program-memory capacity, and deterministic event handling within a relatively small footprint.

PCB implementation requires a stable 1.6 V to 3.6 V supply, correct decoupling, a programmed boot and application section, and adequate exposed-pad thermal relief. Designers should follow the Microchip pin-description and package-drawing tables when assigning the 64-QFN lands and should validate USB signal routing and power-supply startup behavior on the final board.

This page organizes the device's core specifications, application guidance, verified drop-in alternatives, package considerations, and replacement criteria into one engineering-focused resource for MCU selection and PCB design.

Alternativas drop-in para ATXMEGA128B3-MH — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com ATXMEGA128B3-MH (mesmo formato e footprint) — diferindo em Package, Product Type, EEPROM, SRAM, Flash Memory.

Microchip Technology
Package: 64-QFN (9 x 9 mm)
Product Type: 8-/16-bit AVR XMEGA microcontroller
EEPROM: 2 KB
Comparar com ATXMEGA128B3-MH →
Microchip Technology
Package: 44-pin VQFN, 7 x 7 mm
Product Type: 8/16-bit RISC microcontroller
EEPROM: 1 KB
Comparar com ATXMEGA128B3-MH →
Microchip Technology
Package: 44-VQFN, 7 x 7 mm
Product Type: 8/16-bit AVR XMEGA D4 Microcontroller
EEPROM: 1 KB
Comparar com ATXMEGA128B3-MH →
Microchip Technology
Package: 64-QFN (9x9 mm)
Product Type: 8/16-bit AVR XMEGA B3 microcontroller
EEPROM: 2 KB
Comparar com ATXMEGA128B3-MH →

ATXMEGA128B3-MR

✅ Drop-In ⚠️ Especificações não verificadas
📦 64-QFN (9 x 9 mm)
Ordering suffix differs from ATXMEGA128B3-MH by 8% of the suffix code; exact temperature and tape-and-reel configuration require ordering-table confirmation.

📋 Alternativa de referência (fora do catálogo)

ATXMEGA16A4U-MH

✅ Drop-In
Microchip Technology
📦 64-QFN (9 x 9 mm)
8/16-bit RISC microcontroller · AVR XMEGA A4U · 32 MHz · 16 KB (8K x 16) · 4 KB · 2 KB · 1 KB · AVR enhanced RISC

Consulte o preço

Ver ficha técnica →

ATXMEGA32D4-MH

✅ Drop-In
Microchip Technology
📦 64-QFN (9 x 9 mm)
8/16-bit AVR XMEGA D4 Microcontroller · 32 MHz · 32 KB · 4 KB · 1 KB · 4 KB · 34 · 2.7 V to 3.6 V

Consulte o preço

Ver ficha técnica →

ATXMEGA128B3-MH Classificações máximas e características elétricas

Product Type 8/16-bit AVR XMEGA microcontroller
Maximum CPU Frequency 32 MHz
Flash Memory 128 KB (128K x 8)
Boot Code Section 4 KB
SRAM 4 KB
EEPROM 2048 bytes
Operating Voltage Range 1.6 V to 3.6 V
USB Interface USB full-speed device
DMA Controller 2 channels
Event System 4 channels
Encapsulamento 64-QFN (9 x 9 mm) with exposed pad
Contagem de pinos 64 pins
Tipo de montagem Surface mount
Program Memory Type Self-programming flash
Temperature Range -40°C to +85°C
Status RoHS Compliant

Guia de Configuração de Pinos do ATXMEGA128B3-MH 64-qfn (9 x 9 mm) with exposed pad

Configuração de pinos para ATXMEGA128B3-MH (pacote 64-qfn (9 x 9 mm) with exposed pad). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 64-qfn (9 x 9 mm) with exposed pad para ATXMEGA128B3-MH

Nenhum dado detalhado de pinagem disponível para ATXMEGA128B3-MH.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

ATXMEGA128B3-MH é adequado para 6 aplicaçãos: USB Data Acquisition, Industrial Control Module, Touch and Keypad Interface, Portable Instrumentation, USB Configuration Adapter, Communication Equipment.

🖥️

USB Data Acquisition

The ATXMEGA128B3-MH fits USB-connected acquisition modules because it combines a 32 MHz AVR core, 128 KB of self-programming flash, 4 KB of SRAM, and an integrated USB full-speed device interface. Firmware can sample sensor inputs, buffer results, and expose them through a USB protocol without an external interface controller. The two-channel DMA controller can move data between peripherals and memory while the four-channel event system triggers sampling from timers or external events, reducing central-processor intervention. The 1.6 V to 3.6 V range supports compact low-voltage instruments, although the board must preserve USB signal integrity and provide the required local decoupling.

🏭

Industrial Control Module

The ATXMEGA128B3-MH is suitable for compact industrial control modules that require deterministic peripherals, local nonvolatile storage, and USB service connectivity. Its 32 MHz CPU supports protocol handling and supervisory logic, while 128 KB of flash provides room for application code, boot code, and field-update functions. The four-channel event system can coordinate timing between timers, communications, and external control signals, and the two-channel DMA controller can accelerate peripheral transfers. For industrial equipment, the -40°C to +85°C device rating is useful, but deployment still requires input protection, isolation where required, surge handling, and careful grounding.

🧩

Touch and Keypad Interface

The ATXMEGA128B3-MH can implement touch-sensitive or capacitive-keypad front ends while also managing local user feedback and USB connectivity. Its mixed-signal peripherals and event system allow acquisition and event-driven processing to be coordinated with timers, reducing the processing burden associated with scanning controls. The 128 KB flash capacity is useful for calibration tables, interface state machines, and USB-compatible configuration interfaces. Board-level design quality is critical: component choice, guard construction, grounding, and analog trace routing materially affect capacitance-measurement stability. The MCU does not replace the external capacitor network, filter components, or protection required by the selected sensing method.

📱

Portable Instrumentation

The ATXMEGA128B3-MH fits portable measurement instruments where low supply voltage, compact packaging, USB connectivity, and moderate local processing are important. The 128 KB flash supports a bootloader, measurement routines, calibration data, and a USB communication stack, while the 4 KB SRAM can support short acquisition buffers and protocol state. Operating from 1.6 V to 3.6 V helps simplify battery-derived power architecture. The 64-QFN 9 x 9 mm package reduces board area, although the exposed pad requires a deliberate thermal-via pattern. For low-power operation, peripheral activity, sleep modes, reference stability, and the display or sensor load must be evaluated as a complete system.

🔧

USB Configuration Adapter

The ATXMEGA128B3-MH is appropriate for a USB-connected configuration, programming, or service adapter that must combine protocol handling with local storage. Its self-programming flash architecture supports firmware maintenance workflows, while the separate 4 KB boot-code section allows a controlled recovery path when the system designer assigns that region appropriately. USB full-speed device support removes the need for a separate USB controller, and the event system can manage periodic status polling or host requests independently of bulk data movement. Production implementations must protect the boot region, define firmware-update authentication, validate USB descriptors, and ensure that the exposed thermal pad is assembled and connected according to the package drawing.

🌐

Communication Equipment

The ATXMEGA128B3-MH can support compact communication equipment requiring an embedded protocol controller, USB management interface, and deterministic event handling. The 32 MHz core and 128 KB flash provide space for framing, routing, diagnostics, and device management, while the DMA controller can assist with moving data between memory and serial peripherals. The four-channel event system is useful for coordinating transmission timing, receive events, timeouts, and external control signals. Selection of the MCU does not guarantee protocol compatibility with another design: peripheral assignment, pin multiplexing, baud-rate generation, buffering strategy, and USB enumeration behavior must be reviewed during firmware and board design.

What are the key specifications of ATXMEGA128B3-MH that engineers should know?
The ATXMEGA128B3-MH is a 32 MHz, 8/16-bit AVR XMEGA microcontroller with 128 KB flash, 4 KB SRAM, 2048 bytes of EEPROM, and USB full-speed device connectivity. According to the Microchip ATxmega128B3 product page, it also provides a 2-channel DMA controller, a 4-channel event system, and a 1.6 V to 3.6 V operating range. It is supplied in a 64-QFN 9 x 9 mm package with an exposed pad for compact surface-mount designs.
Where can I download the ATXMEGA128B3-MH datasheet PDF?
The official ATXMEGA128B3-MH documentation is available from the Microchip ATxmega128B3 product page at https://www.microchip.com/en-us/product/ATxmega128B3. Use the page's document and data-sheet links to obtain the current family documentation, pin descriptions, electrical characteristics, and package drawings. The device-specific order code is ATXMEGA128B3-MH, while ATXMEGA128B3 identifies the underlying MCU family.
Where can I find the ATXMEGA128B3-MH pinout and 64-QFN footprint?
Use the Microchip ATxmega128B3 product page for the family documentation and package drawings, then locate the pin-description table for the ATXMEGA128B3-MH 64-QFN configuration. The verified device data identifies a 64-QFN package measuring 9 x 9 mm and including an exposed pad. The exposed pad is a thermal and electrical land that must be connected according to the manufacturer's package guidance rather than treated as an unused signal pin.
What is the ATXMEGA128B3-MH power supply voltage range?
The ATXMEGA128B3-MH operates from 1.6 V to 3.6 V. Microchip describes the part as a low-power, high-performance 8/16-bit AVR XMEGA B3 microcontroller. That voltage range makes the device suitable for low-voltage embedded systems, although the final design must also satisfy the limits for USB operation, clocking, analog peripherals, and I/O signaling. Decoupling and exposed-pad connections should follow the family datasheet.
How much flash and SRAM does ATXMEGA128B3-MH have?
The ATXMEGA128B3-MH provides 128 KB of self-programming flash, including a dedicated 4 KB boot-code section, together with 4 KB of SRAM and 2048 bytes of EEPROM. Microchip's ATxmega128B3 product information confirms these memory resources. The larger program and SRAM capacity makes this MCU suitable for USB-connected control, data acquisition, protocol handling, and applications that exceed the resources of entry-level 8-bit devices.
Can ATXMEGA128B3-MH be used for USB device applications?
Yes, the ATXMEGA128B3-MH includes a USB full-speed device interface. According to the Microchip ATxmega128B3 product page, USB connectivity is integrated alongside the 128 KB flash, 4 KB SRAM, DMA controller, and event system. A production design still requires correct USB impedance-controlled routing, compliant power behavior, firmware support, and validation against the applicable USB device requirements.
What is the best drop-in replacement for ATXMEGA128B3-MH?
The ATXMEGA128B3-MR ordering variant is the closest same-family option for the 64-QFN package, but its availability, temperature grade, and order-code configuration must be checked before substitution. A true drop-in replacement must match the package, pinout, clock rating, memory configuration, voltage range, peripheral set, and temperature requirements. No cross-manufacturer device is established as a fully pin-to-pin replacement, so board-level firmware and peripheral compatibility must be validated.
Can ATXMEGA128B3-MR replace ATXMEGA128B3-MH?
ATXMEGA128B3-MR may be a candidate only after its device configuration has been checked against the ATXMEGA128B3-MH requirements. Both names identify a 64-QFN ATXMEGA128B3-class product, but the order suffix can encode packaging and temperature options. Verify the exact flash, SRAM, EEPROM, temperature, clock, and tape-and-reel configuration in the Microchip ordering information before treating it as a drop-in replacement.
When should I choose ATXMEGA128B3-MH over another XMEGA microcontroller?
Choose the ATXMEGA128B3-MH when the design requires the exact 128 KB flash configuration, USB full-speed device support, 32 MHz operation, and a 64-QFN 9 x 9 mm footprint. Consider a smaller-memory XMEGA option when 128 KB of flash is unnecessary and board area is the priority. Consider another package option when the exposed-pad 64-QFN assembly process or exposed-pad thermal requirement is inconvenient.
Is ATXMEGA128B3-MH suitable for industrial control and data acquisition?
The ATXMEGA128B3-MH is suitable for many industrial control and data-acquisition designs because it combines 32 MHz processing, 128 KB flash, 4 KB SRAM, EEPROM, USB, DMA, and a four-channel event system. The verified industrial temperature range is -40°C to +85°C. Suitability still depends on the board's sensor signals, communication requirements, environmental qualification, isolation, and protection design.
What is the difference between ATXMEGA128B3-MH and ATXMEGA16A4U-MH?
Both are Microchip ATXMEGA-family devices, but they are not automatically interchangeable because the family designation does not guarantee identical memory, peripherals, or package details. The ATXMEGA128B3-MH specifically provides 128 KB flash, 4 KB SRAM, 2048 bytes of EEPROM, USB full-speed device support, and a 64-QFN 9 x 9 mm package. ATXMEGA16A4U-MH must be reviewed by memory, package, pin, peripheral, voltage, and clock requirements before substitution.
ATXMEGA128B3-MH vs ATXMEGA32D4-MH: which should I choose?
Choose the ATXMEGA128B3-MH when 128 KB flash, 4 KB SRAM, EEPROM, USB device support, and a 32 MHz maximum CPU frequency are required. Consider ATXMEGA32D4-MH only after confirming its package, memory, peripherals, and electrical characteristics fit the board. The lower number in ATXMEGA32D4-MH should not be assumed to indicate a drop-in part because ATXMEGA family members can differ substantially in integrated resources and pin availability.
What is the best cross-brand equivalent for ATXMEGA128B3-MH?
No cross-brand drop-in equivalent has been established for the ATXMEGA128B3-MH because USB implementation, programming tools, memory organization, peripheral mapping, and package pins create substantial migration risk. A device with a similar clock rating or memory size may still require board changes, driver rewrites, and application qualification. Use the manufacturer's cross-reference workflow for candidate discovery, then perform a complete pin, electrical, firmware, and ecosystem review.
Where can I buy ATXMEGA128B3-MH and what is the current lead time?
Use the Request a Quote form on this page to request current ATXMEGA128B3-MH availability, MOQ, lead time, and a formal quotation. The part is listed by authorized distribution channels and on the Microchip product page, but inventory and lead time can vary by package configuration and order quantity. Provide the target quantity, delivery location, and required date with the request for an actionable supply response.
How should ATXMEGA128B3-MH be placed and routed on a PCB?
Place the 64-QFN as close as practical to its supporting circuitry and follow the exposed-pad land pattern in the Microchip package drawing. Decouple each applicable supply rail at its pins, provide the recommended clock and reset arrangements, and keep sensitive analog paths away from fast digital and USB routing. The exposed pad should have a thermal-via pattern that satisfies assembly and heat-dissipation requirements without violating the manufacturer land geometry.

Dados de referência de engenharia para ATXMEGA128B3-MH — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the ATXMEGA128B3-MH when the board requires an exact 128 KB flash AVR XMEGA configuration with 4 KB SRAM, EEPROM, USB full-speed device support, DMA, an event system, and a 64-QFN 9 x 9 mm footprint. ATXMEGA128B3-MR is the closest same-family candidate when its exact order configuration and delivery format satisfy the design. ATXMEGA16A4U-MH may be considered only if its lower-memory family configuration still meets application needs and its pin, voltage, and peripheral mappings have been verified. ATXMEGA32D4-MH belongs to a different resource configuration and should not replace the target without a complete electrical and firmware review. No cross-brand drop-in replacement is recommended because USB implementation, pin multiplexing, memory architecture, and the AVR tool ecosystem make a migration more substantial than a simple package substitution.

Comparação com alternativas

Parâmetro Este produto ATXMEGA128B3-MR ATXMEGA16A4U-MH ATXMEGA32D4-MH
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 64-QFN (9 x 9 mm) 64-QFN (9 x 9 mm) 64-QFN (9 x 9 mm) 64-QFN (9 x 9 mm)

Principais diferenciais

  • Larger confirmed program-memory configuration (vs ATXMEGA32D4-MH)
  • Confirmed USB and event-system integration (vs ATXMEGA16A4U-MH)
  • Exact order-code alignment within the same device family (vs ATXMEGA128B3-MR)

Notas de projeto

Treat the 64-QFN exposed pad as both a thermal land and a package-level electrical feature. Follow the Microchip package drawing for pad dimensions and via placement, and provide nearby copper without violating assembly-courtyard or soldering requirements. Check junction temperature against the highest expected ambient temperature and load condition during PCB validation; the compact package limits the available heat-spreading area compared with a leaded package.

Place local supply decoupling at the device power pins and route USB D+ and D- as a controlled-impedance differential pair on a continuous reference plane. Keep USB routing away from clocks, switching regulators, and high-current outputs. Follow the Microchip recommended layout and keep the exposed-pad thermal-via pattern consistent with the assembly process so solder wicking does not compromise the signal and ground connections.

Assign pins from the official ATXMEGA128B3-MH pin-description table rather than inferring them from another ATXMEGA device. Verify multiplexed functions, debug signals, analog inputs, timers, communications, and USB connections against the chosen package. The separate 4 KB boot-code section can support a recovery workflow, but the boot boundary and reset behavior must be intentionally programmed and tested before firmware is released.

Do not treat the ATXMEGA family name as proof that two devices are interchangeable. Compare the exact flash size, SRAM, EEPROM, USB implementation, clock limits, voltage range, temperature grade, package dimensions, pin multiplexing, peripheral locations, programming configuration, and tool support. For a cross-family migration, review the bootloader, USB descriptors, driver interfaces, timing assumptions, and brownout behavior in addition to the electrical pinout.

Informações de conformidade

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The exact ATXMEGA128B3-MH listing identifies the device as RoHS compliant. Automotive qualification, REACH status, lead-free status, halogen-free status, and conflict-minerals status require manufacturer confirmation for this exact order code.

Dados verificados em: 2026-11-20 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

ATXMEGA128B3-MH datasheet ATXMEGA128B3-MH pinout ATXMEGA128B3-MH datasheet pdf ATXMEGA128B3-MH footprint ATXMEGA128B3-MH equivalent ATXMEGA128B3-MH replacement ATXMEGA128B3-MH cross reference ATXMEGA128B3-MH price ATXMEGA128B3-MH stock Microchip ATXMEGA128B3-MH ATXMEGA128B3-MH USB ATXMEGA128B3-MH 128KB 32MHz ATXMEGA128B3-MH 64-QFN ATXMEGA128B3-MH vs ATXMEGA32D4-MH ATXMEGA128B3-MH data acquisition

Componentes & termos relacionados

Microchip Technology ATXMEGA128B3-MH ATXMEGA128B3 ATXMEGA128B3-MR ATXMEGA16A4U-MH ATXMEGA32D4-MH AVR XMEGA B3 8/16-bit microcontroller RISC processor embedded controller semiconductor self-programming flash boot code section SRAM EEPROM USB full-speed device DMA controller event system 64-QFN QFN package family surface mount SMD 1.6 V to 3.6 V 32 MHz RoHS REACH AEC-Q100 USB data acquisition industrial control
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ