ATXMEGA128B3-MH - 32MHz 128KB Flash AVR MCU | Microchip
部品番号: ATXMEGA128B3-MH ✓ 生産中ATXMEGA128B3-MH 概要
An 8/16-bit AVR microcontroller is an embedded processing device that combines a RISC-style CPU core, nonvolatile program memory, data memory, and peripherals on one integrated circuit. The ATXMEGA128B3 family belongs to the hierarchy of 8/16-bit AVR microcontrollers, embedded controllers, and semiconductor components. Its combination of USB connectivity, event-system peripherals, direct-memory-access support, and mixed signal resources makes it suitable for compact control systems that require more processing and memory than a basic 8-bit MCU.
Key device resources include 128 KB of self-programming flash, a separate 4 KB boot-code section, 4 KB of SRAM, and 2048 bytes of EEPROM. The integrated USB full-speed device interface enables USB communication without an external controller. A two-channel DMA controller and four-channel event system support data movement and deterministic peripheral triggering, while the analog and timer resources enable practical acquisition, control, and communication functions.
The ATXMEGA128B3-MH is built around Microchip's AVR architecture and runs at up to 32 MHz, providing substantially greater application-code capacity and processing performance than entry-level 8-bit AVR devices. Its 1.6 V to 3.6 V supply range supports low-voltage portable and embedded systems. The 64-QFN 9 x 9 mm package offers a compact land pattern but requires careful PCB layout for its exposed thermal pad and high-speed signal integrity.
Typical uses include USB-connected data acquisition, industrial control modules, compact instrumentation, touch-capacitive interfaces, communication equipment, and embedded consumer products. The device is particularly appropriate when a board needs local USB connectivity, moderate program-memory capacity, and deterministic event handling within a relatively small footprint.
PCB implementation requires a stable 1.6 V to 3.6 V supply, correct decoupling, a programmed boot and application section, and adequate exposed-pad thermal relief. Designers should follow the Microchip pin-description and package-drawing tables when assigning the 64-QFN lands and should validate USB signal routing and power-supply startup behavior on the final board.
This page organizes the device's core specifications, application guidance, verified drop-in alternatives, package considerations, and replacement criteria into one engineering-focused resource for MCU selection and PCB design.
ドロップイン代替品: ATXMEGA128B3-MH — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATXMEGA128B3-MH (同一形状・フットプリント) — 相違点: Package, Product Type, EEPROM, SRAM, Flash Memory.
ATXMEGA128B3-MR
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
ATXMEGA16A4U-MH
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATXMEGA32D4-MH
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATXMEGA128B3-MH 最大定格&電気的特性
| Product Type | 8/16-bit AVR XMEGA microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 128 KB (128K x 8) |
| Boot Code Section | 4 KB |
| SRAM | 4 KB |
| EEPROM | 2048 bytes |
| Operating Voltage Range | 1.6 V to 3.6 V |
| USB Interface | USB full-speed device |
| DMA Controller | 2 channels |
| Event System | 4 channels |
| パッケージ | 64-QFN (9 x 9 mm) with exposed pad |
| ピン数 | 64 pins |
| 実装タイプ | Surface mount |
| Program Memory Type | Self-programming flash |
| Temperature Range | -40°C to +85°C |
| RoHS ステータス | Compliant |
ATXMEGA128B3-MH 64-qfn (9 x 9 mm) with exposed pad ピン配置ガイド
ATXMEGA128B3-MH (64-qfn (9 x 9 mm) with exposed pad パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATXMEGA128B3-MH.
詳細は データシート をご参照ください。
主な用途
ATXMEGA128B3-MH の用途: 6 件s: USB Data Acquisition, Industrial Control Module, Touch and Keypad Interface, Portable Instrumentation, USB Configuration Adapter, Communication Equipment.
USB Data Acquisition
The ATXMEGA128B3-MH fits USB-connected acquisition modules because it combines a 32 MHz AVR core, 128 KB of self-programming flash, 4 KB of SRAM, and an integrated USB full-speed device interface. Firmware can sample sensor inputs, buffer results, and expose them through a USB protocol without an external interface controller. The two-channel DMA controller can move data between peripherals and memory while the four-channel event system triggers sampling from timers or external events, reducing central-processor intervention. The 1.6 V to 3.6 V range supports compact low-voltage instruments, although the board must preserve USB signal integrity and provide the required local decoupling.
おすすめ
Industrial Control Module
The ATXMEGA128B3-MH is suitable for compact industrial control modules that require deterministic peripherals, local nonvolatile storage, and USB service connectivity. Its 32 MHz CPU supports protocol handling and supervisory logic, while 128 KB of flash provides room for application code, boot code, and field-update functions. The four-channel event system can coordinate timing between timers, communications, and external control signals, and the two-channel DMA controller can accelerate peripheral transfers. For industrial equipment, the -40°C to +85°C device rating is useful, but deployment still requires input protection, isolation where required, surge handling, and careful grounding.
おすすめ
Touch and Keypad Interface
The ATXMEGA128B3-MH can implement touch-sensitive or capacitive-keypad front ends while also managing local user feedback and USB connectivity. Its mixed-signal peripherals and event system allow acquisition and event-driven processing to be coordinated with timers, reducing the processing burden associated with scanning controls. The 128 KB flash capacity is useful for calibration tables, interface state machines, and USB-compatible configuration interfaces. Board-level design quality is critical: component choice, guard construction, grounding, and analog trace routing materially affect capacitance-measurement stability. The MCU does not replace the external capacitor network, filter components, or protection required by the selected sensing method.
おすすめ
Portable Instrumentation
The ATXMEGA128B3-MH fits portable measurement instruments where low supply voltage, compact packaging, USB connectivity, and moderate local processing are important. The 128 KB flash supports a bootloader, measurement routines, calibration data, and a USB communication stack, while the 4 KB SRAM can support short acquisition buffers and protocol state. Operating from 1.6 V to 3.6 V helps simplify battery-derived power architecture. The 64-QFN 9 x 9 mm package reduces board area, although the exposed pad requires a deliberate thermal-via pattern. For low-power operation, peripheral activity, sleep modes, reference stability, and the display or sensor load must be evaluated as a complete system.
おすすめ
USB Configuration Adapter
The ATXMEGA128B3-MH is appropriate for a USB-connected configuration, programming, or service adapter that must combine protocol handling with local storage. Its self-programming flash architecture supports firmware maintenance workflows, while the separate 4 KB boot-code section allows a controlled recovery path when the system designer assigns that region appropriately. USB full-speed device support removes the need for a separate USB controller, and the event system can manage periodic status polling or host requests independently of bulk data movement. Production implementations must protect the boot region, define firmware-update authentication, validate USB descriptors, and ensure that the exposed thermal pad is assembled and connected according to the package drawing.
おすすめ
Communication Equipment
The ATXMEGA128B3-MH can support compact communication equipment requiring an embedded protocol controller, USB management interface, and deterministic event handling. The 32 MHz core and 128 KB flash provide space for framing, routing, diagnostics, and device management, while the DMA controller can assist with moving data between memory and serial peripherals. The four-channel event system is useful for coordinating transmission timing, receive events, timeouts, and external control signals. Selection of the MCU does not guarantee protocol compatibility with another design: peripheral assignment, pin multiplexing, baud-rate generation, buffering strategy, and USB enumeration behavior must be reviewed during firmware and board design.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATXMEGA128B3-MH — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATXMEGA128B3-MR | ATXMEGA16A4U-MH | ATXMEGA32D4-MH |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) |
主な差別化要因
- Larger confirmed program-memory configuration (vs ATXMEGA32D4-MH)
- Confirmed USB and event-system integration (vs ATXMEGA16A4U-MH)
- Exact order-code alignment within the same device family (vs ATXMEGA128B3-MR)
設計ノート
Treat the 64-QFN exposed pad as both a thermal land and a package-level electrical feature. Follow the Microchip package drawing for pad dimensions and via placement, and provide nearby copper without violating assembly-courtyard or soldering requirements. Check junction temperature against the highest expected ambient temperature and load condition during PCB validation; the compact package limits the available heat-spreading area compared with a leaded package.
Place local supply decoupling at the device power pins and route USB D+ and D- as a controlled-impedance differential pair on a continuous reference plane. Keep USB routing away from clocks, switching regulators, and high-current outputs. Follow the Microchip recommended layout and keep the exposed-pad thermal-via pattern consistent with the assembly process so solder wicking does not compromise the signal and ground connections.
Assign pins from the official ATXMEGA128B3-MH pin-description table rather than inferring them from another ATXMEGA device. Verify multiplexed functions, debug signals, analog inputs, timers, communications, and USB connections against the chosen package. The separate 4 KB boot-code section can support a recovery workflow, but the boot boundary and reset behavior must be intentionally programmed and tested before firmware is released.
Do not treat the ATXMEGA family name as proof that two devices are interchangeable. Compare the exact flash size, SRAM, EEPROM, USB implementation, clock limits, voltage range, temperature grade, package dimensions, pin multiplexing, peripheral locations, programming configuration, and tool support. For a cross-family migration, review the bootloader, USB descriptors, driver interfaces, timing assumptions, and brownout behavior in addition to the electrical pinout.
コンプライアンス情報
The exact ATXMEGA128B3-MH listing identifies the device as RoHS compliant. Automotive qualification, REACH status, lead-free status, halogen-free status, and conflict-minerals status require manufacturer confirmation for this exact order code.