Microchip Technology

ATXMEGA32X1-UU - 8MHz 32KB 8-Bit MCU | Microchip

N.º da peça: ATXMEGA32X1-UU ✓ Ativo
2.1 V to 5.5 V Vdss WLCSP Package 8 MHz Speed 32 KB Memory
MOQ: 1 |

ATXMEGA32X1-UU Visão geral

The Microchip Technology ATXMEGA32X1-UU is an 8-bit microcontroller operating at 8 MHz, with 32 KB of flash memory and a 2.1 V to 5.5 V supply range. The device is offered in a WLCSP package intended for compact, space-constrained electronic products, and it is identified for industrial-temperature operation. Its small package and low-voltage operating range make it relevant to embedded control, sensor-interface, and compact portable-system designs where board area and power consumption are important design constraints.

A microcontroller is a semiconductor integrated circuit that combines a processor core, programmable memory, data memory, and peripheral interfaces on one device. In the product hierarchy, a microcontroller belongs to the embedded processor and embedded-control category, where it sits above a general-purpose CPU and below a complete control system. Instead of requiring separate memory and interface components, the ATXMEGA32X1-UU consolidates the core processing and embedded-control functions into one component, reducing board footprint and simplifying assembly compared with a discrete processor design.

The three headline identifiers for this device are its 8 MHz operating speed, 32 KB flash memory, and 2.1 V to 5.5 V supply-voltage range. Flash memory retains programmed code when power is removed, supporting repeatable field operation without a separate external program-memory device. The 8 MHz operating rate provides a clear timing reference for the embedded-control role, while the 5.5 V maximum stated operating voltage allows the controller to operate from a regulated low-voltage rail. The WLCSP package further supports dense PCB layouts.

The ATXMEGA32X1-UU belongs to Microchip's ATXMEGA 8-bit microcontroller family. Its 32 KB flash allocation places it in the small-to-medium embedded-memory range: enough for compact control firmware while avoiding the larger memory and package demands of high-end microcontrollers. Because the exact peripheral complement, RAM capacity, pin mapping, and electrical timing characteristics must be verified before schematic capture, the manufacturer datasheet and package drawing should govern final interface assignments, programming configuration, and clock decisions.

Typical design opportunities include compact sensor nodes, industrial control modules, low-voltage embedded instruments, portable accessories, and space-constrained peripheral controllers. In each case, the WLCSP package can help minimize PCB area, while the 2.1 V to 5.5 V operating range supports integration with common low-voltage power systems. Firmware should be configured around the device's actual peripheral resources and current limits, and the PCB should provide suitable power, decoupling, programming access, and exposed-pad thermal management.

A primary design consideration is package-level integration. WLCSP devices require assembly processes capable of handling a small, fine-pitch land pattern, and the exposed thermal pad must be connected to the ground and copper plane as specified by the manufacturer. Confirm pin assignments, pad dimensions, programming signals, and recommended capacitor placement from the official package documentation before releasing a PCB footprint.

This page consolidates the confirmed ATXMEGA32X1-UU specifications, package characteristics, sourcing links, application guidance, and replacement considerations. It is designed to help engineers identify whether the 8 MHz, 32 KB-flash, industrial-temperature WLCSP device fits a compact embedded-control design and to distinguish a validated drop-in replacement from merely similar microcontrollers.

Alternativas drop-in para ATXMEGA32X1-UU — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Nenhuma alternativa drop-in disponível para este produto.

Solicitar alternativas

ATXMEGA32X1-UU Classificações máximas e características elétricas

Microcontroller Type 8-bit microcontroller
Maximum CPU Frequency 8 MHz
Flash Memory 32 KB
Operating Supply Voltage Range 2.1 V to 5.5 V
Package Type WLCSP
Temperature Grade Industrial temperature
Green Status Green
Program Memory Type Flash
Tipo de montagem Surface mount

Guia de Configuração de Pinos do ATXMEGA32X1-UU wlcsp

Configuração de pinos para ATXMEGA32X1-UU (pacote wlcsp). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote wlcsp para ATXMEGA32X1-UU

Nenhum dado detalhado de pinagem disponível para ATXMEGA32X1-UU.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

ATXMEGA32X1-UU é adequado para 6 aplicaçãos: Compact Industrial Sensor Node, Low-Voltage Embedded Control Module, Space-Constrained Peripheral Controller, Portable Accessory Controller, Industrial Control and Monitoring, Low-Power Embedded Instrument.

🧩

Compact Industrial Sensor Node

The ATXMEGA32X1-UU fits compact sensor-node designs that require an 8-bit embedded controller, 32 KB of flash memory, and operation across a 2.1 V to 5.5 V supply range. Its WLCSP package reduces the controller footprint, which can help designers reserve board area for sensing circuitry, signal conditioning, communications, or energy-management components. The device should be placed near the regulated low-voltage rail and supported by local decoupling. Before schematic approval, verify the required sensor inputs, timer resources, communication interfaces, and I/O voltage levels in the manufacturer datasheet.

⚡

Low-Voltage Embedded Control Module

A 2.1 V to 5.5 V operating range makes the ATXMEGA32X1-UU relevant to low-voltage embedded control modules operating from regulated rails. The controller's 8 MHz operating speed provides a defined performance basis for supervisory logic, state-machine firmware, and peripheral coordination, while 32 KB flash stores the application program. The WLCSP package supports dense module layouts. Design the power system for the device's exact current and voltage limits, and confirm the exposed-pad and grounding requirements from the official package documentation.

🔧

Space-Constrained Peripheral Controller

The ATXMEGA32X1-UU is suited to space-constrained peripheral controllers where a separate processor, program-memory IC, and discrete interface logic would increase board complexity. Integrating an 8-bit MCU, 32 KB flash memory, and low-voltage operation in WLCSP can shorten the PCB outline and simplify the bill of materials. Its industrial-temperature identification also supports designs aimed at extended-temperature industrial environments. Validate the exact peripheral set and pin availability for the intended peripheral before layout release, and ensure the assembler supports the selected WLCSP process.

📱

Portable Accessory Controller

For portable accessories, the ATXMEGA32X1-UU offers a combination of 8 MHz processing, 32 KB flash, and a 2.1 V to 5.5 V operating range within a compact WLCSP package. These characteristics suit applications that need embedded control without a high-pin-count package or external program-memory device. A compact wearable, portable meter, or accessory controller should account for the regulator's startup behavior, required I/O, programming access, and exposed-pad heat spreading. Use the manufacturer datasheet to confirm whether the available interfaces satisfy the accessory's control and update requirements.

🏭

Industrial Control and Monitoring

The ATXMEGA32X1-UU is relevant to industrial control and monitoring products because it is identified for industrial-temperature operation and combines an 8-bit CPU with 32 KB flash memory in a small WLCSP package. It can serve as a local controller for status inputs, sequencing logic, or peripheral supervision when the system's interface requirements fit the device. The 2.1 V to 5.5 V supply range supports integration with regulated industrial rails. Confirm isolation, surge, environmental, and communication requirements separately, and use the manufacturer electrical limits for every connected node.

🖥️

Low-Power Embedded Instrument

The ATXMEGA32X1-UU can serve as the control element in a compact embedded instrument that needs persistent firmware, modest processing capacity, and a low-voltage supply. The 32 KB flash area supports application code and configuration storage, while the WLCSP package minimizes the footprint occupied by the controller. For battery-powered instruments, evaluate quiescent current and active-current requirements in the manufacturer datasheet, then size the regulator and energy budget around those values. Add programming, test-point, and reset access that remains practical for production servicing.

What is the ATXMEGA32X1-UU?
The ATXMEGA32X1-UU is a Microchip Technology 8-bit microcontroller with an operating speed of 8 MHz, 32 KB of flash memory, and a 2.1 V to 5.5 V operating supply range. It is packaged in WLCSP and identified for industrial-temperature operation. According to the manufacturer datasheet and product documentation, the device is intended for compact embedded-control designs where low voltage, small PCB area, and integrated program memory are priorities.
What are the key specifications of ATXMEGA32X1-UU?
The key ATXMEGA32X1-UU specifications are an 8 MHz maximum operating frequency, 32 KB of flash memory, a 2.1 V to 5.5 V supply range, and a WLCSP package. The part is also identified as an industrial-temperature, green device. Use these figures for initial architecture selection, then consult the manufacturer datasheet for RAM, pin assignments, peripheral availability, electrical limits, and programming details.
Where can I download the ATXMEGA32X1-UU datasheet PDF?
The ATXMEGA32X1-UU datasheet and package information can be obtained from Microchip Technology's product documentation. Use the exact ATXMEGA32X1-UU ordering code when locating the PDF so that the electrical table and WLCSP drawing correspond to the correct package. The product links on this page also provide access to technical documents, and the manufacturer datasheet should be the controlling reference for final design decisions.
Where can I find the ATXMEGA32X1-UU pinout?
The ATXMEGA32X1-UU pinout is defined by the manufacturer datasheet and the associated WLCSP package drawing. Because WLCSP pin numbering and exposed-pad connections are assembly-critical, do not infer the layout from a generic symbol. Confirm every signal, power pin, ground connection, programming interface, and exposed-pad instruction against the package drawing before creating the PCB footprint or releasing artwork.
Where can I buy ATXMEGA32X1-UU online?
The ATXMEGA32X1-UU can be requested through the Request a Quote form on this page. The form is the appropriate route for obtaining current commercial availability, quantity support, and an order quotation without relying on a stale price table. Because this part uses a fine-pitch WLCSP package, include your PCB assembly process, target quantity, and packaging requirements in the request so that sourcing can reflect the actual production needs.
What is the price of ATXMEGA32X1-UU?
Current pricing for the ATXMEGA32X1-UU is best obtained through the Request a Quote form on this page. The submitted quote reflects the requested quantity and current sourcing conditions rather than a static price that may quickly become inaccurate. For production planning, include annual and prototype quantities, reel or tray requirements, date-code needs, and delivery expectations so the commercial response reflects the complete purchasing requirement.
What is the lead time for ATXMEGA32X1-UU?
The current lead time for ATXMEGA32X1-UU should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, production scheduling, component availability, and packaging requirements. For a schedule-critical program, state the required delivery date, annual usage, forecast cadence, and whether partial shipments are acceptable. That information enables a more useful allocation and delivery response than a generic availability claim.
Is ATXMEGA32X1-UU in stock?
ATXMEGA32X1-UU availability should be confirmed through the Request a Quote form on this page. Inventory status changes with order volume, date-code requirements, packaging, and regional supply conditions. State your required quantity and production schedule in the request. If continuous production is planned, include a rolling forecast and your preferred inventory model so that supply planning can account for more than a single prototype order.
When should I choose ATXMEGA32X1-UU for an embedded design?
Choose the ATXMEGA32X1-UU when a compact 8-bit controller, 8 MHz operating speed, 32 KB flash memory, and a 2.1 V to 5.5 V supply range align with the design. Its WLCSP package is particularly relevant when board area is constrained and the assembly process can handle fine-pitch parts. Confirm the required I/O, memory, peripheral, and programming resources in the manufacturer datasheet before committing the design.
Is ATXMEGA32X1-UU suitable for a compact sensor node?
The ATXMEGA32X1-UU can suit a compact sensor node when the node requires an 8-bit embedded controller, 32 KB of nonvolatile program memory, and operation from a 2.1 V to 5.5 V rail. Its WLCSP package helps reduce board area. Before selection, verify sensor-interface requirements, timing, available I/O, ADC needs, and power characteristics against the manufacturer datasheet rather than assuming every sensor function is present.
What is the best drop-in replacement for ATXMEGA32X1-UU?
No drop-in replacement for the ATXMEGA32X1-UU has been validated from the available cross-reference results, so a specific replacement should not be named without package-level verification. A valid replacement must match the WLCSP land pattern, pin assignments, electrical limits, clocking, memory requirement, and firmware behavior. Use the manufacturer's cross-reference tools with the exact ordering code, then review the candidate datasheet and package drawing before treating it as a drop-in part.
Can another Microchip ATXMEGA device replace ATXMEGA32X1-UU?
Another Microchip ATXMEGA device can replace the ATXMEGA32X1-UU only after its package, pinout, electrical ratings, clock system, memory, peripherals, and startup behavior are shown to match. A shared family name and similar memory capacity do not establish drop-in compatibility. Use the manufacturer cross-reference resources for an exact-ordering-code search, and perform a firmware and schematic review before approving any substitute.
What is the best cross-brand equivalent for ATXMEGA32X1-UU?
No cross-brand equivalent has been validated as a drop-in replacement for the ATXMEGA32X1-UU. A cross-brand candidate would need the same WLCSP footprint and pin-to-pin assignments, compatible I/O characteristics, suitable memory capacity, and equivalent peripheral functions. Because the ATXMEGA instruction set, boot behavior, and clock architecture are device-specific, treat any candidate as a redesign until its datasheet and application requirements have been reviewed.
ATXMEGA32X1-UU vs ATXMEGA64A1-CUR: which is better for a compact design?
The ATXMEGA32X1-UU is the more compact option in this comparison because it is specified in WLCSP, operates at 8 MHz, and includes 32 KB of flash. The ATXMEGA64A1-CUR may suit designs needing more memory, but its package and detailed operating characteristics must be checked before a footprint-level comparison is possible. Neither device should be treated as an automatic drop-in substitute without a complete pin and electrical review.
How should the ATXMEGA32X1-UU WLCSP layout be designed?
Design the ATXMEGA32X1-UU layout from the manufacturer package drawing, including the exact WLCSP pad dimensions, pin numbering, solder-mask and paste rules, and exposed-pad connection. Place required decoupling close to its power pins and provide a thermal copper area according to the recommended land pattern. Validate the footprint against the assembly house's WLCSP process and perform a solderability and paste-volume review before production.

Dados de referência de engenharia para ATXMEGA32X1-UU — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Select the ATXMEGA32X1-UU when the design needs an 8-bit microcontroller operating at 8 MHz, 32 KB of flash, a 2.1 V to 5.5 V supply range, and a space-efficient WLCSP package. It is a strong candidate for compact sensor nodes, industrial monitoring modules, portable accessories, and low-voltage embedded instruments when its exact pin, peripheral, and timing resources satisfy the design. Choose a larger ATXMEGA family member only when memory or peripheral requirements exceed this device's capabilities and the PCB can accommodate its package. Do not treat another ATXMEGA or a cross-brand MCU as a drop-in replacement unless the land pattern, pinout, electrical limits, clocking, boot process, and firmware requirements have been validated. For WLCSP production designs, include assembly-capability review in the component-selection stage rather than after PCB release.

Comparação com alternativas

Parâmetro Este produto
Manufacturer Microchip Technology
Package WLCSP
CPU Class 8-bit microcontroller
Maximum CPU Frequency 8 MHz
Flash Memory 32 KB
Operating Supply Voltage Range 2.1 V to 5.5 V
Temperature Grade Industrial temperature
Green Status Green
Mounting Type Surface mount

Principais diferenciais

  • Compact WLCSP implementation (vs ATXMEGA64A1-CUR)
  • Defined low-voltage operating range (vs ATXMEGA256D3-AU)
  • Balanced embedded program memory (vs ATXMEGA128B1-CU)

Notas de projeto

Create the ATXMEGA32X1-UU footprint directly from the manufacturer WLCSP package drawing, including pad dimensions, pin-one orientation, solder-mask openings, and the exposed thermal pad. Do not substitute a generic WLCSP footprint because pad geometry can vary by ball count and die. Review the land pattern with the selected assembly house and confirm its paste and stencil process before releasing production artwork.

Power the device from a regulated source within its specified 2.1 V to 5.5 V operating range. Place the required input and bypass capacitors close to the corresponding pins using the manufacturer recommendation, and keep sensitive return currents out of the capacitor and exposed-pad ground path. Verify startup, voltage tolerance, and current limits against the official electrical characteristics before selecting the regulator.

Treat the WLCSP exposed pad as both a package feature and a thermal-design element. Connect it according to the manufacturer package documentation and provide an uninterrupted copper area to spread heat into the board. For continuously loaded designs, estimate junction temperature from actual dissipation, ambient temperature, and the package's thermal model. Use the manufacturer layout guidance rather than relying on an assumed thermal-pad connection.

The most common implementation risk is treating WLCSP assembly like a standard leaded or coarse-pitch IC. Verify that the assembler supports the device's fine-pitch geometry, inspectability method, stencil design, and exposed-pad process. Also confirm programming access, reset behavior, clock source, and decoupling against the manufacturer datasheet. A functionally correct schematic can still fail production assembly if the footprint or process capability is not matched.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The product listing identifies ATXMEGA32X1-UU as a green industrial-temperature device. Use the manufacturer product page and current material-compliance documentation for definitive RoHS, REACH, halogen-free, lead-free, conflict-minerals, and automotive qualification statements.

Dados verificados em: 2026-11-10 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

ATXMEGA32X1-UU datasheet ATXMEGA32X1-UU specifications ATXMEGA32X1-UU pinout ATXMEGA32X1-UU datasheet pdf ATXMEGA32X1-UU equivalent ATXMEGA32X1-UU replacement ATXMEGA32X1-UU WLCSP footprint ATXMEGA32X1-UU 8 MHz ATXMEGA32X1-UU 32 KB flash ATXMEGA32X1-UU 2.1V 5.5V ATXMEGA32X1-UU price ATXMEGA32X1-UU stock Microchip ATXMEGA32X1-UU ATXMEGA32X1-UU vs ATXMEGA64A1-CUR ATXMEGA32X1-UU compact sensor controller

Componentes & termos relacionados

Microchip Technology ATXMEGA32X1-UU ATXMEGA64A1-CUR ATXMEGA256D3-AU ATXMEGA128B1-CU 8-bit microcontroller embedded microcontroller embedded processor embedded control flash memory WLCSP WLCSP package family surface-mount package 8 MHz 32 KB flash 2.1 V to 5.5 V industrial temperature sensor node industrial monitoring embedded instrument green electronic component program memory fine-pitch assembly exposed thermal pad
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ