ATXMEGA384D3-AN - 32MHz 384KB AVR XMEGA Microcontroller | Microchip Technology
N.º da peça: ATXMEGA384D3-AN ✓ AtivoATXMEGA384D3-AN Visão geral
AVR XMEGA microcontrollers are 8/16-bit RISC microcontrollers positioned between general-purpose 8-bit MCUs and more complex 32-bit embedded processors. The XMEGA D3 family combines a high-performance AVR core with a four-channel event system, programmable peripherals, and extensive memory in a single integrated circuit. This makes it useful when a design requires more SRAM and Flash capacity than a basic 8-bit AVR while retaining the simplicity of the AVR software and peripheral model.
Key features include 384 KB of Flash storage with an 8 KB boot section, 4 KB of EEPROM, 32 KB of SRAM, a 32 MHz clock rating, and a four-channel event system. The large memory footprint supports protocol stacks, configuration data, logging, graphical data handling, and firmware updates. The ATXMEGA384D3-AN is also listed with a 64-TQFP package and a 1.6 V to 3.6 V supply range.
The MCU architecture supports an 8/16-bit instruction set with a high-performance pipeline, hardware multipliers, and dedicated event-system resources for deterministic signal routing. The event system is particularly useful for applications requiring direct communication between timers, comparator outputs, and other peripherals without routing every event through the CPU.
Typical uses include industrial control and automation, sensor hubs, communication equipment, embedded gateways, data-acquisition systems, and consumer devices requiring more memory than a basic 8-bit MCU. The part is appropriate where a compact 64-pin surface-mount controller is needed and where 1.6 V to 3.6 V operation and a maximum temperature rating of 105 degrees C are important design constraints.
For PCB implementation, use the manufacturer's pin description and package drawings when assigning power, ground, programming, and peripheral signals. The TQFP footprint requires careful escape routing between closely spaced pins, and the device should be placed to minimize noise coupling from switching converters and high-current traces. This product page combines the device specifications, package information, sourcing details, and application guidance needed for initial design review.
Alternativas drop-in para ATXMEGA384D3-AN — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
ATXMEGA384D3-AU
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ATXMEGA384D3-AUR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ATXMEGA384D3-MTR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
ATXMEGA384D3-AN Classificações máximas e características elétricas
| Product Type | 8/16-bit AVR XMEGA microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 384 KB |
| Boot Code Section | 8 KB |
| EEPROM Memory | 4 KB |
| SRAM | 32 KB |
| Operating Voltage Range | 1.6 V to 3.6 V |
| Event System | Four channels |
| Programmable Memory Type | In-system programmable Flash with read-while-write capability |
| Core / Instruction Set | AVR XMEGA 8/16-bit |
| Encapsulamento | 64-TQFP (14 x 14 mm) |
| Tipo de montagem | Surface mount |
| Temperature Rating | 105 degrees C maximum |
| Green / Environmental Designation | Green |
Guia de Configuração de Pinos do ATXMEGA384D3-AN 64-tqfp (14 x 14 mm)
Configuração de pinos para ATXMEGA384D3-AN (pacote 64-tqfp (14 x 14 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para ATXMEGA384D3-AN.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
ATXMEGA384D3-AN é adequado para 6 aplicaçãos: Industrial Sensor Hub, Data-Acquisition Controller, Industrial Automation Controller, Communication Gateway, Embedded Logging Device, Consumer Control Module.
Industrial Sensor Hub
The ATXMEGA384D3-AN fits sensor-hub designs that combine several measurement channels with local buffering and communications. Its 32 MHz maximum frequency supports responsive peripheral handling, while 32 KB of SRAM provides working space for samples, filters, and protocol buffers. The 4 KB EEPROM is useful for calibration constants and configuration data, and the 384 KB Flash accommodates drivers, acquisition routines, and a communication stack. A four-channel event system can coordinate timer, comparator, and external events with less CPU intervention. The 64-TQFP footprint integrates many I/O functions into a compact 14 x 14 mm surface-mount package, although careful decoupling and signal-layout planning are needed around sensitive analog inputs.
Recomendado
Data-Acquisition Controller
The ATXMEGA384D3-AN is appropriate for data-acquisition controllers that gather digital and analog-derived signals and retain or forward them to a host. The 32 KB SRAM allows meaningful sample buffering without continuous external-memory transfers, while 384 KB of Flash leaves substantial room for acquisition control, signal processing, and communications. The four-channel event system is valuable for deterministic timing between counters, timers, and comparison events. At 32 MHz, the MCU can service multiple peripheral tasks and protocol routines, while the 1.6 V to 3.6 V operating range supports low-voltage embedded platforms. For high-accuracy analog measurement, pair the MCU with suitable converters and protect analog routing from digital switching noise.
Recomendado
Industrial Automation Controller
The ATXMEGA384D3-AN can serve as a compact controller for industrial automation modules that coordinate digital I/O, timers, communications, and local logic. Its 8/16-bit AVR XMEGA architecture is well matched to deterministic control tasks, while 32 KB of SRAM supports state machines and communication buffers. The 384 KB Flash capacity allows larger control algorithms or field-bus drivers than smaller 32 KB-class XMEGA devices. A maximum listed temperature rating of 105 degrees C suits demanding industrial environments when the complete board, power supply, and enclosure are validated together. The event system helps connect timers and comparator outputs directly, reducing processing latency for safety-relevant or timing-sensitive routines.
Recomendado
Communication Gateway
The ATXMEGA384D3-AN is useful in protocol-conversion gateways where one embedded system must maintain a local interface, process frames, and manage configuration data. The 384 KB Flash capacity accommodates protocol stacks, boot code, and application firmware, while 32 KB of SRAM supports receive and transmit buffers. An 8 KB dedicated boot-code section can support controlled firmware startup and update routines. The four-channel event system can coordinate timing between communication interfaces and application peripherals, reducing the need for polling. Its 64-TQFP package offers a high pin count for serial interfaces, logic signals, and control outputs, while the 1.6 V to 3.6 V range allows integration with low-voltage system rails. Validate signal levels and transceiver interfaces separately.
Recomendado
Embedded Logging Device
The ATXMEGA384D3-AN fits compact logging devices that must retain firmware, parameters, and event history without relying on a larger processor. Its 384 KB in-system programmable Flash provides substantially more code space than a 32 KB-class XMEGA part, and the 4 KB EEPROM is suitable for small configuration or calibration records. Thirty-two kilobytes of SRAM can support buffered records while a nonvolatile storage interface receives data. The 32 MHz maximum clock allows efficient background processing and protocol handling. For battery-operated equipment, use the MCU's low-power modes and size external storage and power regulation for the actual logging workload rather than relying on nominal processor speed alone.
Recomendado
Consumer Control Module
The ATXMEGA384D3-AN can support compact consumer control modules that combine touch or button inputs, status indicators, communications, and configurable behavior. The large Flash area permits a structured application, local interface code, and diagnostic routines, while 32 KB of SRAM is sufficient for moderate menu, animation, or protocol buffers. The four-channel event system can assist with responsive input and timer coordination. A 64-TQFP package provides more I/O than a small package while retaining a manageable 14 x 14 mm footprint. The 1.6 V to 3.6 V supply range permits direct integration with 3.3 V logic when regulator headroom is adequate. Final product validation should include sleep-current measurement, thermal behavior, and electromagnetic compatibility testing.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para ATXMEGA384D3-AN — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | ATXMEGA384D3-AU | ATXMEGA384D3-AUR | ATXMEGA384D3-MTR |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
Principais diferenciais
- Large Flash capacity for XMEGA-class firmware (vs ATXMEGA32D4-ANR)
- More SRAM for buffering and real-time data handling (vs ATXMEGA32D4-ANR)
- Industrial-oriented temperature specification (vs ATXMEGA384D3-AU)
Notas de projeto
Design the supply network for the documented 1.6 V to 3.6 V operating range and place the manufacturer's recommended decoupling capacitors adjacent to the corresponding power and ground pins. The 64-TQFP package has many signal pins, so verify each rail connection in the pin-description table. Keep analog and communications supplies away from high-current switching paths, and check startup behavior across the full supply range.
Follow the official 64-TQFP land pattern and pin-1 orientation rather than inferring the footprint from the package name. TQFP leads are closely spaced, so use the narrowest manufacturer-approved trace and via strategy that maintains production yield. Place programming, reset, and clock-support components where they remain accessible without introducing long sensitive traces across the board.
Route high-speed, clock, and communication signals away from noisy power converters and sensor inputs. Provide a compact ground return for each signal path and keep bypass-current loops small. If the design uses analog acquisition, maintain separation between analog and digital sections, use a defined ground strategy, and validate the layout with signal-integrity and EMC measurements representative of the final enclosure and cables.
Do not treat every ATxmega384D3 suffix as electrically and commercially interchangeable. Confirm the exact temperature grade, package, packing method, and orderable marking against the target assembly. Also verify bootloader support, clock configuration, fuse settings, and application dependencies when replacing an MCU; pin-compatible hardware does not guarantee that existing firmware or production programming scripts will operate without adjustment.
Informações de conformidade
The device is described as green, but specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not confirmed in the cited manufacturer page text.