Microchip Technology

ATXMEGA384D3-AN - 32MHz 384KB AVR XMEGA Microcontroller | Microchip Technology

Артикул: ATXMEGA384D3-AN ✓ Активен
1.6 V to 3.6 V Vdss 64-TQFP (14 x 14 mm) Package 32 MHz Speed 384 KB Memory
MOQ: 1 |

ATXMEGA384D3-AN Обзор

The Microchip Technology ATXMEGA384D3-AN is a high-performance, low-power 8/16-bit AVR XMEGA microcontroller with 384 KB of in-system programmable Flash memory, 4 KB of EEPROM, 32 KB of SRAM, and a maximum operating frequency of 32 MHz. The device is supplied in a 64-pin TQFP package measuring 14 x 14 mm and is identified as a green, industrial-temperature part with a 1.6 V to 3.6 V operating voltage range. Its 8 KB boot-code section supports read-while-write operation in the Flash memory region.

AVR XMEGA microcontrollers are 8/16-bit RISC microcontrollers positioned between general-purpose 8-bit MCUs and more complex 32-bit embedded processors. The XMEGA D3 family combines a high-performance AVR core with a four-channel event system, programmable peripherals, and extensive memory in a single integrated circuit. This makes it useful when a design requires more SRAM and Flash capacity than a basic 8-bit AVR while retaining the simplicity of the AVR software and peripheral model.

Key features include 384 KB of Flash storage with an 8 KB boot section, 4 KB of EEPROM, 32 KB of SRAM, a 32 MHz clock rating, and a four-channel event system. The large memory footprint supports protocol stacks, configuration data, logging, graphical data handling, and firmware updates. The ATXMEGA384D3-AN is also listed with a 64-TQFP package and a 1.6 V to 3.6 V supply range.

The MCU architecture supports an 8/16-bit instruction set with a high-performance pipeline, hardware multipliers, and dedicated event-system resources for deterministic signal routing. The event system is particularly useful for applications requiring direct communication between timers, comparator outputs, and other peripherals without routing every event through the CPU.

Typical uses include industrial control and automation, sensor hubs, communication equipment, embedded gateways, data-acquisition systems, and consumer devices requiring more memory than a basic 8-bit MCU. The part is appropriate where a compact 64-pin surface-mount controller is needed and where 1.6 V to 3.6 V operation and a maximum temperature rating of 105 degrees C are important design constraints.

For PCB implementation, use the manufacturer's pin description and package drawings when assigning power, ground, programming, and peripheral signals. The TQFP footprint requires careful escape routing between closely spaced pins, and the device should be placed to minimize noise coupling from switching converters and high-current traces. This product page combines the device specifications, package information, sourcing details, and application guidance needed for initial design review.

Аналоги без доработки для ATXMEGA384D3-AN — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

ATXMEGA384D3-AU

✅ Прямая замена
📦 64-TQFP (14 x 14 mm)
Same 384 KB Flash, 4 KB EEPROM, 32 KB SRAM, 32 MHz rating, and 64-TQFP format; temperature and packing suffix must be confirmed

📋 Справочный аналог (нет в каталоге)

ATXMEGA384D3-AUR

✅ Прямая замена
📦 64-TQFP (14 x 14 mm)
Same ATxmega384D3 memory and frequency configuration in the listed 64-TQFP format; R suffix indicates a different orderable packing configuration

📋 Справочный аналог (нет в каталоге)

ATXMEGA384D3-MTR

✅ Прямая замена
📦 64-TQFP (14 x 14 mm)
Same ATxmega384D3 core and memory family; M-series temperature or packing ordering must be checked against the target 105 degrees C requirement

📋 Справочный аналог (нет в каталоге)

ATXMEGA384D3-AN Максимальные параметры и электрические характеристики

Product Type 8/16-bit AVR XMEGA microcontroller
Maximum CPU Frequency 32 MHz
Flash Memory 384 KB
Boot Code Section 8 KB
EEPROM Memory 4 KB
SRAM 32 KB
Operating Voltage Range 1.6 V to 3.6 V
Event System Four channels
Programmable Memory Type In-system programmable Flash with read-while-write capability
Core / Instruction Set AVR XMEGA 8/16-bit
Корпус 64-TQFP (14 x 14 mm)
Тип монтажа Surface mount
Temperature Rating 105 degrees C maximum
Green / Environmental Designation Green

Руководство по цоколевке ATXMEGA384D3-AN в корпусе 64-tqfp (14 x 14 mm)

Цоколевка для ATXMEGA384D3-AN (корпус 64-tqfp (14 x 14 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 64-tqfp (14 x 14 mm) для ATXMEGA384D3-AN

Нет подробных данных о распиновке для ATXMEGA384D3-AN.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

ATXMEGA384D3-AN подходит для 6 применениеs: Industrial Sensor Hub, Data-Acquisition Controller, Industrial Automation Controller, Communication Gateway, Embedded Logging Device, Consumer Control Module.

🏭

Industrial Sensor Hub

The ATXMEGA384D3-AN fits sensor-hub designs that combine several measurement channels with local buffering and communications. Its 32 MHz maximum frequency supports responsive peripheral handling, while 32 KB of SRAM provides working space for samples, filters, and protocol buffers. The 4 KB EEPROM is useful for calibration constants and configuration data, and the 384 KB Flash accommodates drivers, acquisition routines, and a communication stack. A four-channel event system can coordinate timer, comparator, and external events with less CPU intervention. The 64-TQFP footprint integrates many I/O functions into a compact 14 x 14 mm surface-mount package, although careful decoupling and signal-layout planning are needed around sensitive analog inputs.

🖥️

Data-Acquisition Controller

The ATXMEGA384D3-AN is appropriate for data-acquisition controllers that gather digital and analog-derived signals and retain or forward them to a host. The 32 KB SRAM allows meaningful sample buffering without continuous external-memory transfers, while 384 KB of Flash leaves substantial room for acquisition control, signal processing, and communications. The four-channel event system is valuable for deterministic timing between counters, timers, and comparison events. At 32 MHz, the MCU can service multiple peripheral tasks and protocol routines, while the 1.6 V to 3.6 V operating range supports low-voltage embedded platforms. For high-accuracy analog measurement, pair the MCU with suitable converters and protect analog routing from digital switching noise.

🏭

Industrial Automation Controller

The ATXMEGA384D3-AN can serve as a compact controller for industrial automation modules that coordinate digital I/O, timers, communications, and local logic. Its 8/16-bit AVR XMEGA architecture is well matched to deterministic control tasks, while 32 KB of SRAM supports state machines and communication buffers. The 384 KB Flash capacity allows larger control algorithms or field-bus drivers than smaller 32 KB-class XMEGA devices. A maximum listed temperature rating of 105 degrees C suits demanding industrial environments when the complete board, power supply, and enclosure are validated together. The event system helps connect timers and comparator outputs directly, reducing processing latency for safety-relevant or timing-sensitive routines.

🌐

Communication Gateway

The ATXMEGA384D3-AN is useful in protocol-conversion gateways where one embedded system must maintain a local interface, process frames, and manage configuration data. The 384 KB Flash capacity accommodates protocol stacks, boot code, and application firmware, while 32 KB of SRAM supports receive and transmit buffers. An 8 KB dedicated boot-code section can support controlled firmware startup and update routines. The four-channel event system can coordinate timing between communication interfaces and application peripherals, reducing the need for polling. Its 64-TQFP package offers a high pin count for serial interfaces, logic signals, and control outputs, while the 1.6 V to 3.6 V range allows integration with low-voltage system rails. Validate signal levels and transceiver interfaces separately.

🧩

Embedded Logging Device

The ATXMEGA384D3-AN fits compact logging devices that must retain firmware, parameters, and event history without relying on a larger processor. Its 384 KB in-system programmable Flash provides substantially more code space than a 32 KB-class XMEGA part, and the 4 KB EEPROM is suitable for small configuration or calibration records. Thirty-two kilobytes of SRAM can support buffered records while a nonvolatile storage interface receives data. The 32 MHz maximum clock allows efficient background processing and protocol handling. For battery-operated equipment, use the MCU's low-power modes and size external storage and power regulation for the actual logging workload rather than relying on nominal processor speed alone.

📱

Consumer Control Module

The ATXMEGA384D3-AN can support compact consumer control modules that combine touch or button inputs, status indicators, communications, and configurable behavior. The large Flash area permits a structured application, local interface code, and diagnostic routines, while 32 KB of SRAM is sufficient for moderate menu, animation, or protocol buffers. The four-channel event system can assist with responsive input and timer coordination. A 64-TQFP package provides more I/O than a small package while retaining a manageable 14 x 14 mm footprint. The 1.6 V to 3.6 V supply range permits direct integration with 3.3 V logic when regulator headroom is adequate. Final product validation should include sleep-current measurement, thermal behavior, and electromagnetic compatibility testing.

What is the ATXMEGA384D3-AN?
The ATXMEGA384D3-AN is a Microchip Technology 8/16-bit AVR XMEGA microcontroller operating at up to 32 MHz. It provides 384 KB of in-system programmable Flash, 4 KB of EEPROM, 32 KB of SRAM, a four-channel event system, and a 1.6 V to 3.6 V operating range in a 64-TQFP package.
How much Flash memory does the ATXMEGA384D3-AN have?
The ATXMEGA384D3-AN has 384 KB of in-system programmable Flash memory, including an 8 KB boot-code section. The Flash supports read-while-write operation according to the Microchip ATxmega384D3 product information, making it suitable for firmware that needs local code execution and data updates.
What package does the ATXMEGA384D3-AN use?
The ATXMEGA384D3-AN uses a 64-pin TQFP package measuring 14 x 14 mm. It is a surface-mount package, so the PCB layout must follow the manufacturer's 64-TQFP footprint and pin assignments. Use the manufacturer datasheet when assigning power, programming, clock, and peripheral signals.
What is the operating voltage of the ATXMEGA384D3-AN?
The ATXMEGA384D3-AN operates from 1.6 V to 3.6 V according to the Mouser product listing. The device is therefore suited to 3.3 V embedded systems, provided that every connected peripheral and the PCB power design also supports the selected rail and required startup conditions.
Is the ATXMEGA384D3-AN suitable for industrial applications?
The ATXMEGA384D3-AN is listed with a maximum temperature rating of 105 degrees C, making it appropriate for many industrial environments. The device combines 384 KB Flash, 32 KB SRAM, and a four-channel event system for embedded control, acquisition, and communication designs, subject to normal operating-condition validation.
Where can I download the ATXMEGA384D3-AN datasheet PDF?
The manufacturer product page for ATxmega384D3 is the appropriate starting point for the official ATXMEGA384D3-AN documentation. It provides the device family information and links to technical resources. The related 64-TQFP package and pin details should be checked against the exact ordering code before PCB release.
Where can I find the ATXMEGA384D3-AN pinout?
The ATXMEGA384D3-AN pinout is found in the manufacturer's ATxmega384D3 package drawing and pin-description table. The device has 64 TQFP pins, and the exact signal names must be taken from that documentation because the pinout includes power, ground, programming, clock, reset, communications, and multiple peripheral functions.
What is the difference between ATXMEGA384D3-AN and ATXMEGA384D3-AU?
Both are Microchip ATxmega384D3 devices with 384 KB Flash, 4 KB EEPROM, 32 KB SRAM, and a 32 MHz maximum frequency. The ordering suffixes identify different packaging or temperature options, so the correct replacement depends on the required package, temperature grade, and orderable configuration rather than memory capacity.
What is the best drop-in replacement for ATXMEGA384D3-AN?
The closest drop-in candidate is the Microchip ATXMEGA384D3-AU because it is identified as the same AVR XMEGA D3 384 KB device in a 64-TQFP package. Before substitution, confirm the temperature range, packing method, pin functions, clock requirements, and supply conditions against the exact manufacturer ordering information.
Can ATXMEGA384D3-AU replace ATXMEGA384D3-AN?
ATXMEGA384D3-AU can be considered a same-family replacement candidate because the listed device has the same 384 KB Flash, 4 KB EEPROM, 32 KB SRAM, 32 MHz rating, and 64-TQFP format. Verify the temperature grade, packing code, and manufacturer ordering details before treating it as a drop-in replacement.
ATXMEGA384D3-AN vs ATXMEGA32D4-ANR - which is better for embedded control?
Choose ATXMEGA384D3-AN when firmware and data storage are the priority because it provides 384 KB of Flash, 4 KB of EEPROM, and 32 KB of SRAM. ATXMEGA32D4-ANR is a different XMEGA D4 device and should be selected only after checking its memory capacity, peripherals, pinout, timing, and application requirements against the target design.
When should I choose ATXMEGA384D3-AN over a smaller XMEGA microcontroller?
Choose ATXMEGA384D3-AN when the application needs substantial code space, 32 KB of SRAM, EEPROM storage, and a 32 MHz MCU without moving to a 32-bit processor. Its 384 KB Flash is substantially larger than the 32 KB class of XMEGA D4 devices, making it better suited to protocol stacks, buffering, logging, and larger application firmware.
Is ATXMEGA384D3-AN suitable for sensor and data-acquisition systems?
The ATXMEGA384D3-AN is suitable for sensor hubs and data-acquisition controllers because it combines 32 MHz processing performance, 32 KB of SRAM, 4 KB of EEPROM, and a four-channel event system. The event system can support deterministic peripheral routing, while the larger Flash and SRAM accommodate drivers, filtering, buffering, and communication firmware.
Where can I buy ATXMEGA384D3-AN online?
Use the Request a Quote form on this page to request ATXMEGA384D3-AN sourcing, current availability, lot information, and lead time. The form is the appropriate channel for an exact-order-code quote and avoids confusion with other ATxmega384D3 package or temperature variants.
What is the price of ATXMEGA384D3-AN?
Request current ATXMEGA384D3-AN pricing and quantity availability through the Request a Quote form on this page. The quote should be tied to the exact -AN ordering code, required quantity, and delivery location so that the commercial terms match the intended 64-TQFP configuration.
What is the lead time for ATXMEGA384D3-AN?
Submit the ATXMEGA384D3-AN quantity and target delivery requirements through the Request a Quote form on this page. Current lead time is confirmed with the order response rather than inferred from a generic listing, because allocation can vary by package configuration, quantity, and production schedule.

Справочные инженерные данные для ATXMEGA384D3-AN — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Select the ATXMEGA384D3-AN when an embedded design needs the full 384 KB Flash, 4 KB EEPROM, 32 KB SRAM, four-channel event system, and 32 MHz operating capability of the ATxmega384D3 family in a 64-TQFP package. It is particularly suitable for industrial control, data acquisition, sensor hubs, and communication modules where local buffering and a substantial firmware footprint justify the larger XMEGA D3 resource set. ATXMEGA384D3-AU is the closest listed same-family candidate, but verify its temperature and packing requirements before substitution. ATXMEGA384D3-AUR and ATXMEGA384D3-MTR may suit specific production or temperature requirements, although each ordering suffix must be checked against the exact assembly process. ATXMEGA32D4-ANR is appropriate only when 32 KB-class Flash is sufficient and the lower memory budget is acceptable.

Сравнение с аналогами

Параметр Этот товар ATXMEGA384D3-AU ATXMEGA384D3-AUR ATXMEGA384D3-MTR
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology

Ключевые отличия

  • Large Flash capacity for XMEGA-class firmware (против ATXMEGA32D4-ANR)
  • More SRAM for buffering and real-time data handling (против ATXMEGA32D4-ANR)
  • Industrial-oriented temperature specification (против ATXMEGA384D3-AU)

Заметки по проектированию

Design the supply network for the documented 1.6 V to 3.6 V operating range and place the manufacturer's recommended decoupling capacitors adjacent to the corresponding power and ground pins. The 64-TQFP package has many signal pins, so verify each rail connection in the pin-description table. Keep analog and communications supplies away from high-current switching paths, and check startup behavior across the full supply range.

Follow the official 64-TQFP land pattern and pin-1 orientation rather than inferring the footprint from the package name. TQFP leads are closely spaced, so use the narrowest manufacturer-approved trace and via strategy that maintains production yield. Place programming, reset, and clock-support components where they remain accessible without introducing long sensitive traces across the board.

Route high-speed, clock, and communication signals away from noisy power converters and sensor inputs. Provide a compact ground return for each signal path and keep bypass-current loops small. If the design uses analog acquisition, maintain separation between analog and digital sections, use a defined ground strategy, and validate the layout with signal-integrity and EMC measurements representative of the final enclosure and cables.

Do not treat every ATxmega384D3 suffix as electrically and commercially interchangeable. Confirm the exact temperature grade, package, packing method, and orderable marking against the target assembly. Also verify bootloader support, clock configuration, fuse settings, and application dependencies when replacing an MCU; pin-compatible hardware does not guarantee that existing firmware or production programming scripts will operate without adjustment.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The device is described as green, but specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations are not confirmed in the cited manufacturer page text.

Данные проверены: 2026-11-20 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

atxmega384d3 mhr ATXMEGA384D3-AN datasheet ATXMEGA384D3 datasheet pdf ATXMEGA384D3-AN pinout ATXMEGA384D3-AN specifications ATXMEGA384D3-AN equivalent ATXMEGA384D3-AN replacement ATXMEGA384D3-AN cross reference ATXMEGA384D3-AN vs ATXMEGA32D4-ANR ATXMEGA384D3 64-TQFP footprint Microchip ATXMEGA384D3-AN ATXMEGA384D3-AN price ATXMEGA384D3-AN stock ATXMEGA384D3 industrial control ATXMEGA384D3 data acquisition

Связанные компоненты & термины

Microchip Technology ATXMEGA384D3-AN ATxmega384D3 ATXMEGA384D3-AU ATXMEGA384D3-AUR ATXMEGA384D3-MTR ATXMEGA32D4-ANR AVR XMEGA 8/16-bit microcontroller RISC microcontroller embedded microcontroller semiconductor 384 KB Flash 32 KB SRAM 4 KB EEPROM 32 MHz 1.6 V to 3.6 V four-channel event system 64-TQFP TQFP family surface mount in-system programming read-while-write industrial control data acquisition
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ