C8051F584-IM - 50MHz 8051 MCU with 96KB Flash | Silicon Labs
N.º da peça: C8051F584-IM ✓ AtivoC8051F584-IM Visão geral
An 8-bit microcontroller is a programmable semiconductor that combines a central processing unit, nonvolatile program memory, data memory, and peripherals on one integrated circuit. The C8051F58x family belongs to the 8051 microcontroller hierarchy, combining a CISC-compatible processor core with mixed-signal acquisition and automotive communication peripherals. This combination makes the device suitable for compact control modules that must gather analog measurements and communicate over vehicle-oriented networks.
Key features include 50 MHz maximum operating frequency, 50 MIPS instruction throughput, 96 KB of flash, 8 KB of RAM, and 40 I/O pins. Integrated communication support includes CAN 2.0, LIN 2.1, SPI, two UART interfaces, and I2C. The 12-bit ADC supports applications requiring programmable gain, programmable sampling rates, and analog signal conditioning. Operating voltage options include 2.5 V, 3.3 V, and 5 V configurations, allowing the controller to operate across multiple embedded-system power rails.
The C8051F58x architecture is designed for space-constrained automotive and industrial systems. Its flash memory supports field-updateable firmware, while the mix of serial interfaces reduces the need for external communication devices. The exposed pad beneath the 48-QFN package provides a direct thermal path into the PCB, an important consideration when the MCU operates continuously inside an enclosed automotive or industrial control unit.
Typical applications include LIN and CAN gateway modules, body-control units, automotive lighting controllers, actuator interfaces, sensor-hub nodes, motor-control peripherals, and industrial acquisition equipment. For these designs, the combination of 40 I/O lines, a 12-bit ADC, and integrated CAN and LIN controllers reduces board area and system complexity. The microcontroller is particularly appropriate where deterministic embedded control and multiple communications protocols are needed in the same enclosure.
PCB implementation should preserve the exposed-pad connection and follow the manufacturer's land pattern and thermal-layout guidance. Place decoupling capacitors close to the appropriate supply pins, route sensitive analog inputs away from switching nodes and high-current outputs, and confirm the selected power range against the complete firmware and peripheral configuration. The exposed pad should be thermally coupled to a suitable ground-plane area rather than left as an isolated copper island.
This product page combines the exact C8051F584-IM package, memory, interface, and performance characteristics with application guidance, replacement constraints, and engineering design notes. It also distinguishes the true 48-QFN drop-in candidates from variants that use different packages, so designers can select a replacement without overlooking footprint or temperature-grade differences.
Alternativas drop-in para C8051F584-IM — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
C8051F584-IMR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
C8051F581-IM
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
C8051F505-IM
✅ Drop-InConsulte o preço
Ver ficha técnica →C8051F584-IM Classificações máximas e características elétricas
| Microcontroller Family | C8051F58x |
| Architecture | 8-bit 8051 CISC |
| Maximum CPU Frequency | 50 MHz |
| Instruction Throughput | 50 MIPS |
| Flash Memory | 96 KB |
| RAM | 8 KB |
| General-Purpose I/O Pins | 40 |
| ADC Resolution | 12 bit |
| CAN Interface | CAN 2.0 |
| LIN Interface | LIN 2.1 |
| SPI Interface | 1 interface |
| UART Interface | 2 interfaces |
| I2C Interface | 1 interface |
| Operating Voltage Options | 2.5 V, 3.3 V, or 5 V |
| Encapsulamento | 48-QFN (7 x 7 mm) with exposed pad |
| Tipo de montagem | Surface Mount |
| Automotive Qualification | Automotive and industrial microcontroller |
Guia de Configuração de Pinos do C8051F584-IM 48-qfn (7 x 7 mm) with exposed pad
Configuração de pinos para C8051F584-IM (pacote 48-qfn (7 x 7 mm) with exposed pad). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para C8051F584-IM.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
C8051F584-IM é adequado para 6 aplicaçãos: Automotive LIN and CAN Gateway, Body-Control and Lighting Module, Industrial Sensor and Acquisition Node, Actuator and Motor Interface, Programmable Data Logger, Secure Automotive Communication Bridge.
Automotive LIN and CAN Gateway
The C8051F584-IM fits a compact gateway that translates between CAN 2.0, LIN 2.1, and serial sensor traffic. Its 50 MHz 8051 core provides up to 50 MIPS of throughput for protocol conversion, while 96 KB of flash stores gateway logic, diagnostic routines, and network tables. Two UARTs, SPI, and I2C provide additional paths to local sensors and actuators. The 40 available I/O pins support status indicators, wake signals, and transceiver control, and the 12-bit ADC can monitor supply or analog sensor lines.
Recomendado
Body-Control and Lighting Module
The C8051F584-IM is appropriate for a compact body-control module that coordinates lamps, relays, switches, and diagnostic inputs. Its 40 I/O pins reduce the need for external GPIO expanders, while the 12-bit ADC permits monitoring of analog feedback and supply conditions. With 96 KB flash and 8 KB RAM, firmware can combine state-machine control, debounce logic, fault detection, and communication services. Operating at 50 MHz gives deterministic control while CAN and LIN connect the module to the wider vehicle network.
Recomendado
Industrial Sensor and Acquisition Node
The C8051F584-IM works well in an industrial acquisition node that combines analog measurement with local control and network reporting. The 12-bit ADC handles sensor signals, while programmable gain and sampling features can improve use of the converter input range. The 50 MHz processor performs filtering, scaling, and diagnostics, and 96 KB flash accommodates calibration tables and application firmware. CAN 2.0, LIN 2.1, SPI, I2C, and two UARTs support diverse sensor and service interfaces without requiring several dedicated communication devices.
Recomendado
Actuator and Motor Interface
The C8051F584-IM can supervise actuators where local timing, sensor monitoring, and network communication must coexist. Its 40 I/O pins support digital inputs, pulse outputs, direction signals, and fault flags, while the 50 MIPS throughput supports responsive control loops. The integrated ADC provides a measurement path for position, current, or supply feedback. CAN 2.0 and LIN 2.1 enable command reception and status reporting, and the 96 KB flash capacity is sufficient for structured control code, parameter tables, and diagnostic routines.
Recomendado
Programmable Data Logger
The C8051F584-IM supports a compact industrial data logger that periodically records analog and digital events and forwards them through a serial link. Its 12-bit ADC acquires measured inputs, and 96 KB flash can hold firmware plus configuration and lookup data. The 8 KB RAM provides working space for buffering, while 40 I/O pins handle triggers, alarms, and digital channels. SPI and I2C allow attachment to memory or sensor components, while CAN, LIN, and two UARTs offer several ways to integrate the logger with test and control equipment.
Recomendado
Secure Automotive Communication Bridge
The C8051F584-IM fits a communication bridge that receives messages over CAN or LIN and redistributes them through SPI, I2C, or UART. The 50 MHz core supports protocol processing, message filtering, and diagnostic handling, while 96 KB flash accommodates bridge tables and application code. Its mixed-signal ADC can provide rail monitoring or analog status inputs, and the 40 I/O lines support transceiver enables, interrupt routing, and configuration straps. The integrated peripheral set reduces external bridge components in space-constrained automotive electronics.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para C8051F584-IM — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | C8051F584-IMR | C8051F581-IM | C8051F505-IM |
|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 48-QFN (7 x 7 mm) with exposed pad | 48-QFN (7 x 7 mm) with exposed pad - same footprint | 48-QFN - same family package | 48-QFN - same family package |
Principais diferenciais
- Higher confirmed flash capacity than the separately identified C8051F500-IM (vs C8051F500-IM)
- Integrated interface mix supports multi-protocol gateways (vs C8051F500-IM)
- 40 I/O pins reduce external GPIO-expander overhead (vs C8051F500-IM)
- Same-footprint ordering option for production logistics (vs C8051F584-IMR)
Notas de projeto
The exposed pad is the primary thermal path for the 48-QFN device. Follow the manufacturer's exposed-pad land pattern and place a continuous thermal-via array beneath the pad where the board stack-up and assembly process allow. Avoid placing a keepout directly under the pad unless the recommended via field is explicitly permitted. Provide as much uninterrupted ground copper as practical so heat can spread into both the top and bottom PCB layers.
Place the required input and bulk decoupling capacitors close to their associated supply and ground pins, with the shortest possible return path. Separate analog and digital return currents where the design permits, and route analog inputs away from CAN, LIN, switching, and high-current actuator nets. Preserve the manufacturer's pad dimensions and exposed-pad geometry; a QFN footprint substitution cannot tolerate changes intended for a 48-TQFP package.
Do not substitute C8051F584-IQ for C8051F584-IM merely because both belong to the C8051F584 family. The IQ ordering code uses a 48-TQFP package and therefore requires a different PCB footprint. Also verify the 2.5 V, 3.3 V, or 5 V operating configuration, clock source, memory map, peripheral availability, and temperature grade before releasing a replacement to production.
Keep oscillator and high-speed communication routing short, with continuous ground references and controlled return paths beneath clock and serial signals. The integrated ADC is intended for mixed-signal acquisition, so isolate sensitive analog traces from digital switching activity and transceiver routing. Check the pin-description table for analog, digital, power, ground, reset, and programming assignments before assigning tracks or test points.
Validate startup sequencing, brownout behavior, and voltage tolerances for every 2.5 V, 3.3 V, or 5 V configuration used by the design. Include the peripheral current, analog conversion activity, communications loading, and ambient temperature when checking supply headroom. If the MCU sits near a regulator or actuator driver, control switching-node coupling into its supply pins and use local bulk capacitance to manage transient load steps.
Informações de conformidade
The C8051F58x family is identified as an automotive and industrial microcontroller family, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified.