Silicon Labs

C8051F584-IM - 50MHz 8051 MCU with 96KB Flash | Silicon Labs

Référence : C8051F584-IM ✓ Actif
2.5 V, 3.3 V, or 5 V Vdss 48-QFN (7 x 7 mm) with exposed pad Package 50 MHz Speed 96 KB Memory
MOQ : 1 |

C8051F584-IM Présentation

Silicon Labs C8051F584-IM is an automotive and industrial 8-bit C8051F58x mixed-signal microcontroller operating at up to 50 MHz with 50 MIPS of throughput. It integrates 96 KB of flash memory, 8 KB of RAM, 40 general-purpose I/O pins, and a 12-bit ADC, while supporting CAN 2.0, LIN 2.1, SPI, two UARTs, and I2C communication. The device is offered in a 48-QFN package with an exposed pad for compact, surface-mount automotive and industrial designs.

An 8-bit microcontroller is a programmable semiconductor that combines a central processing unit, nonvolatile program memory, data memory, and peripherals on one integrated circuit. The C8051F58x family belongs to the 8051 microcontroller hierarchy, combining a CISC-compatible processor core with mixed-signal acquisition and automotive communication peripherals. This combination makes the device suitable for compact control modules that must gather analog measurements and communicate over vehicle-oriented networks.

Key features include 50 MHz maximum operating frequency, 50 MIPS instruction throughput, 96 KB of flash, 8 KB of RAM, and 40 I/O pins. Integrated communication support includes CAN 2.0, LIN 2.1, SPI, two UART interfaces, and I2C. The 12-bit ADC supports applications requiring programmable gain, programmable sampling rates, and analog signal conditioning. Operating voltage options include 2.5 V, 3.3 V, and 5 V configurations, allowing the controller to operate across multiple embedded-system power rails.

The C8051F58x architecture is designed for space-constrained automotive and industrial systems. Its flash memory supports field-updateable firmware, while the mix of serial interfaces reduces the need for external communication devices. The exposed pad beneath the 48-QFN package provides a direct thermal path into the PCB, an important consideration when the MCU operates continuously inside an enclosed automotive or industrial control unit.

Typical applications include LIN and CAN gateway modules, body-control units, automotive lighting controllers, actuator interfaces, sensor-hub nodes, motor-control peripherals, and industrial acquisition equipment. For these designs, the combination of 40 I/O lines, a 12-bit ADC, and integrated CAN and LIN controllers reduces board area and system complexity. The microcontroller is particularly appropriate where deterministic embedded control and multiple communications protocols are needed in the same enclosure.

PCB implementation should preserve the exposed-pad connection and follow the manufacturer's land pattern and thermal-layout guidance. Place decoupling capacitors close to the appropriate supply pins, route sensitive analog inputs away from switching nodes and high-current outputs, and confirm the selected power range against the complete firmware and peripheral configuration. The exposed pad should be thermally coupled to a suitable ground-plane area rather than left as an isolated copper island.

This product page combines the exact C8051F584-IM package, memory, interface, and performance characteristics with application guidance, replacement constraints, and engineering design notes. It also distinguishes the true 48-QFN drop-in candidates from variants that use different packages, so designers can select a replacement without overlooking footprint or temperature-grade differences.

Alternatives de remplacement direct pour C8051F584-IM — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.

C8051F584-IMR

✅ Remplacement direct
📦 48-QFN (7 x 7 mm) with exposed pad
Same 48-QFN footprint and 50 MHz, 96 KB, 8 KB, CAN, LIN, SPI, two-UART, and I2C configuration; ordering packaging code differs by 0% in core parameters.

📋 Alternative de référence (hors catalogue)

C8051F581-IM

✅ Remplacement direct
📦 48-QFN (7 x 7 mm) with exposed pad
Same C8051F58x 48-QFN family architecture and communication architecture; device-specific memory and peripheral differences require firmware review, with no confirmed difference above 10%.

📋 Alternative de référence (hors catalogue)

C8051F505-IM

✅ Remplacement direct
Silicon Labs
📦 48-QFN (7 x 7 mm) with exposed pad
8-bit mixed-signal microcontroller · C8051F50x 8051-compatible MCU · 50 MHz · 50 MIPS · 32 KB · 32K x 8 bits · 4.25K x 8 bits · 1.8 V to 5.25 V

Contactez-nous pour le prix

Voir la fiche technique →

C8051F584-IM Valeurs maximales et caractéristiques électriques

Microcontroller Family C8051F58x
Architecture 8-bit 8051 CISC
Maximum CPU Frequency 50 MHz
Instruction Throughput 50 MIPS
Flash Memory 96 KB
RAM 8 KB
General-Purpose I/O Pins 40
ADC Resolution 12 bit
CAN Interface CAN 2.0
LIN Interface LIN 2.1
SPI Interface 1 interface
UART Interface 2 interfaces
I2C Interface 1 interface
Operating Voltage Options 2.5 V, 3.3 V, or 5 V
Boîtier 48-QFN (7 x 7 mm) with exposed pad
Type de montage Surface Mount
Automotive Qualification Automotive and industrial microcontroller

Guide de configuration des broches du C8051F584-IM 48-qfn (7 x 7 mm) with exposed pad

Configuration des broches du C8051F584-IM (boîtier 48-qfn (7 x 7 mm) with exposed pad). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.

Schéma de brochage du boîtier 48-qfn (7 x 7 mm) with exposed pad pour le C8051F584-IM

Aucune donnée de brochage détaillée disponible pour C8051F584-IM.

Consultez la fiche technique pour la configuration complète des broches.

Applications typiques

C8051F584-IM convient pour 6 applications: Automotive LIN and CAN Gateway, Body-Control and Lighting Module, Industrial Sensor and Acquisition Node, Actuator and Motor Interface, Programmable Data Logger, Secure Automotive Communication Bridge.

🚗

Automotive LIN and CAN Gateway

The C8051F584-IM fits a compact gateway that translates between CAN 2.0, LIN 2.1, and serial sensor traffic. Its 50 MHz 8051 core provides up to 50 MIPS of throughput for protocol conversion, while 96 KB of flash stores gateway logic, diagnostic routines, and network tables. Two UARTs, SPI, and I2C provide additional paths to local sensors and actuators. The 40 available I/O pins support status indicators, wake signals, and transceiver control, and the 12-bit ADC can monitor supply or analog sensor lines.

🚗

Body-Control and Lighting Module

The C8051F584-IM is appropriate for a compact body-control module that coordinates lamps, relays, switches, and diagnostic inputs. Its 40 I/O pins reduce the need for external GPIO expanders, while the 12-bit ADC permits monitoring of analog feedback and supply conditions. With 96 KB flash and 8 KB RAM, firmware can combine state-machine control, debounce logic, fault detection, and communication services. Operating at 50 MHz gives deterministic control while CAN and LIN connect the module to the wider vehicle network.

🏭

Industrial Sensor and Acquisition Node

The C8051F584-IM works well in an industrial acquisition node that combines analog measurement with local control and network reporting. The 12-bit ADC handles sensor signals, while programmable gain and sampling features can improve use of the converter input range. The 50 MHz processor performs filtering, scaling, and diagnostics, and 96 KB flash accommodates calibration tables and application firmware. CAN 2.0, LIN 2.1, SPI, I2C, and two UARTs support diverse sensor and service interfaces without requiring several dedicated communication devices.

🏭

Actuator and Motor Interface

The C8051F584-IM can supervise actuators where local timing, sensor monitoring, and network communication must coexist. Its 40 I/O pins support digital inputs, pulse outputs, direction signals, and fault flags, while the 50 MIPS throughput supports responsive control loops. The integrated ADC provides a measurement path for position, current, or supply feedback. CAN 2.0 and LIN 2.1 enable command reception and status reporting, and the 96 KB flash capacity is sufficient for structured control code, parameter tables, and diagnostic routines.

🖥️

Programmable Data Logger

The C8051F584-IM supports a compact industrial data logger that periodically records analog and digital events and forwards them through a serial link. Its 12-bit ADC acquires measured inputs, and 96 KB flash can hold firmware plus configuration and lookup data. The 8 KB RAM provides working space for buffering, while 40 I/O pins handle triggers, alarms, and digital channels. SPI and I2C allow attachment to memory or sensor components, while CAN, LIN, and two UARTs offer several ways to integrate the logger with test and control equipment.

🌐

Secure Automotive Communication Bridge

The C8051F584-IM fits a communication bridge that receives messages over CAN or LIN and redistributes them through SPI, I2C, or UART. The 50 MHz core supports protocol processing, message filtering, and diagnostic handling, while 96 KB flash accommodates bridge tables and application code. Its mixed-signal ADC can provide rail monitoring or analog status inputs, and the 40 I/O lines support transceiver enables, interrupt routing, and configuration straps. The integrated peripheral set reduces external bridge components in space-constrained automotive electronics.

Récapitulatif des produits recommandés

C8051F584-IMR Alternate order-packaging code for the same 48-QFN device configuration Utilisé dans : Automotive LIN and CAN Gateway, Body-Control and Lighting Module, Actuator and Motor Interface, Secure Automotive Communication Bridge C8051F581-IM C8051F58x family device for gateway protocol evaluation Utilisé dans : Automotive LIN and CAN Gateway, Body-Control and Lighting Module, Industrial Sensor and Acquisition Node, Programmable Data Logger, Secure Automotive Communication Bridge C8051F505-IM Silicon Labs Utilisé dans : Industrial Sensor and Acquisition Node, Actuator and Motor Interface, Programmable Data Logger
What are the key specifications of C8051F584-IM that engineers should know?
The C8051F584-IM is an 8-bit, 50 MHz C8051F58x microcontroller with 50 MIPS throughput, 96 KB of flash, 8 KB of RAM, and 40 I/O pins. It also integrates a 12-bit ADC, CAN 2.0, LIN 2.1, SPI, two UARTs, and I2C in a 48-QFN package. According to the Silicon Labs manufacturer datasheet, its mixed-signal and automotive communication features make it appropriate for compact body-control, gateway, sensing, and industrial acquisition systems.
What is the operating frequency of the C8051F584-IM?
The C8051F584-IM operates at up to 50 MHz and provides up to 50 MIPS of instruction throughput. Its 8051 CISC core executes from integrated flash rather than requiring an external program-memory device. According to the Silicon Labs manufacturer datasheet, the 50 MHz operating point supports deterministic embedded control while retaining the established 8051 instruction set and peripheral ecosystem.
How much memory does the C8051F584-IM have?
The C8051F584-IM contains 96 KB of flash memory and 8 KB of RAM. Flash provides nonvolatile storage for firmware, while RAM supports working variables, stack operations, and communication buffers. According to the Silicon Labs manufacturer datasheet, the 96 KB flash capacity supports field-updateable automotive and industrial firmware, including protocol stacks, diagnostics, control logic, and communication buffers.
Which communication interfaces are integrated in the C8051F584-IM?
The C8051F584-IM integrates CAN 2.0, LIN 2.1, SPI, two UART interfaces, and I2C. According to the Silicon Labs manufacturer datasheet, this interface mix supports vehicle-network gateways, body-control modules, sensor nodes, and industrial controllers. The multiple on-chip serial peripherals reduce external interface-chip requirements, although final bus rates and electrical levels must be matched to the target network.
What package does the C8051F584-IM use?
The C8051F584-IM uses a 48-QFN package measuring 7 x 7 mm with an exposed pad. According to the Silicon Labs manufacturer datasheet, the exposed pad must be connected according to the prescribed land pattern and used as a thermal and electrical path. A 48-TQFP variant is a different footprint and is not a pin-compatible replacement for a QFN-based PCB.
Where can I download the C8051F584-IM datasheet PDF?
The C8051F584-IM datasheet PDF is available through the Silicon Labs C8051F58x product-page resources and the linked manufacturer-document entry. Use the manufacturer's pin-description table and package drawings when assigning PCB tracks. The document also defines the clock, ADC, communication peripheral, electrical limits, and exposed-pad requirements needed for a qualified hardware design.
Where can I find the C8051F584-IM pinout?
The C8051F584-IM pinout is documented in the Silicon Labs manufacturer datasheet under the 48-QFN package information and pin-description table. The device has 48 package pins plus an exposed thermal pad that is not counted as a conventional signal pin. Use that table to assign power, ground, reset, clock, analog-input, and communication signals on the PCB.
Is the C8051F584-IM suitable for automotive LIN and CAN gateway applications?
The C8051F584-IM is suitable for automotive LIN and CAN gateway applications because it integrates LIN 2.1, CAN 2.0, a 12-bit ADC, and 40 I/O pins. According to the Silicon Labs manufacturer datasheet, the C8051F58x family targets automotive and industrial mixed-signal systems. Network transceivers, connectors, protection devices, and qualification requirements remain separate board-level design tasks.
What is the difference between C8051F584-IM and C8051F584-IMR?
The C8051F584-IM and C8051F584-IMR are both 48-QFN Silicon Labs devices with the same core, memory, and mixed-signal feature set. Their distinction is the order-packaging code, so the board footprint and electrical performance are not interchangeable reasons for selection. Confirm the required delivery format, temperature grade, and ordering code before treating one as the specified procurement equivalent.
What can replace the C8051F584-IM in an existing 48-QFN design?
The closest drop-in candidates are 48-QFN members of the Silicon Labs C8051F58x family, but firmware, memory, peripheral configuration, temperature grade, and exposed-pad layout must be checked before substitution. A 48-TQFP device is not drop-in compatible because its lead geometry and footprint differ. Use the Request a Quote form on this page to identify the exact source and shipping configuration for the required MPN.
C8051F584-IM vs C8051F581-IM: which is better for a mixed-signal control module?
The C8051F584-IM is the safer choice when a design specifically depends on its 96 KB flash allocation because the published C8051F581-IM comparison does not confirm identical memory capacity. The C8051F581-IM may remain attractive when its resource set is verified as sufficient and its 48-QFN pinout matches the board. Review the memory map, peripheral set, package drawing, and device revision before approving either choice.
When should I choose C8051F584-IM over a smaller C8051 MCU?
Choose the C8051F584-IM when a design benefits from 96 KB flash, 8 KB RAM, 40 I/O pins, and simultaneous CAN, LIN, SPI, UART, and I2C support. A smaller 8051 device may reduce footprint and cost when those resources are unnecessary. The C8051F584-IM is more appropriate when one compact controller must perform analog acquisition, network translation, diagnostics, and local control.
Where to buy C8051F584-IM online?
The C8051F584-IM can be requested through the Request a Quote form on this page, where the exact manufacturer MPN, quantity, delivery format, and lead-time requirement should be specified. The target order code is the 48-QFN C8051F584-IM rather than the 48-TQFP C8051F584-IQ or the alternate 48-QFN packaging code C8051F584-IMR.
What is the price of C8051F584-IM?
The current commercial price for C8051F584-IM should be confirmed through the Request a Quote form on this page because pricing depends on quantity, source condition, and delivery format. The listing identifies an exact 48-QFN part with 96 KB flash and 50 MHz operation. Submit the required quantity and purchase order details so the quote reflects the exact MPN and current supply conditions.
What is the lead time and stock status for C8051F584-IM?
Current stock and lead time for C8051F584-IM should be confirmed through the Request a Quote form on this page. Provide the required quantity, target date, and acceptable shipping method with the request. The part is listed as an in-stock 48-QFN microcontroller in a distributor result, but live inventory and delivery commitments should be confirmed for the exact order quantity.

Données de référence d'ingénierie pour C8051F584-IM — comparaison, recommandations de conception et informations de conformité.

Guide de sélection

Choose the C8051F584-IM when an existing design requires a 48-QFN automotive and industrial 8051 controller with 50 MHz operation, 96 KB flash, 8 KB RAM, 40 I/O pins, a 12-bit ADC, and integrated CAN, LIN, SPI, UART, and I2C support. It is a strong fit for compact gateways, body-control modules, data loggers, and actuator interfaces where a mixed-signal controller reduces external component count. Select C8051F584-IMR when that exact electrical configuration is correct but procurement requires the alternate ordering format; confirm its delivery condition before approval. Evaluate C8051F581-IM or C8051F505-IM only after checking their memory maps, peripherals, pin assignments, and qualification details against the target design. Do not choose the 48-TQFP C8051F584-IQ as a board-level substitute because its footprint differs. For any alternate candidate, preserve the exposed-pad layout, validate voltage and temperature requirements, and review the manufacturer documentation before releasing production firmware.

Comparaison avec les alternatives

Paramètre Ce produit C8051F584-IMR C8051F581-IM C8051F505-IM
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 48-QFN (7 x 7 mm) with exposed pad 48-QFN (7 x 7 mm) with exposed pad - same footprint 48-QFN - same family package 48-QFN - same family package

Principaux différenciateurs

  • Higher confirmed flash capacity than the separately identified C8051F500-IM (vs C8051F500-IM)
  • Integrated interface mix supports multi-protocol gateways (vs C8051F500-IM)
  • 40 I/O pins reduce external GPIO-expander overhead (vs C8051F500-IM)
  • Same-footprint ordering option for production logistics (vs C8051F584-IMR)

Notes de conception

The exposed pad is the primary thermal path for the 48-QFN device. Follow the manufacturer's exposed-pad land pattern and place a continuous thermal-via array beneath the pad where the board stack-up and assembly process allow. Avoid placing a keepout directly under the pad unless the recommended via field is explicitly permitted. Provide as much uninterrupted ground copper as practical so heat can spread into both the top and bottom PCB layers.

Place the required input and bulk decoupling capacitors close to their associated supply and ground pins, with the shortest possible return path. Separate analog and digital return currents where the design permits, and route analog inputs away from CAN, LIN, switching, and high-current actuator nets. Preserve the manufacturer's pad dimensions and exposed-pad geometry; a QFN footprint substitution cannot tolerate changes intended for a 48-TQFP package.

Do not substitute C8051F584-IQ for C8051F584-IM merely because both belong to the C8051F584 family. The IQ ordering code uses a 48-TQFP package and therefore requires a different PCB footprint. Also verify the 2.5 V, 3.3 V, or 5 V operating configuration, clock source, memory map, peripheral availability, and temperature grade before releasing a replacement to production.

Keep oscillator and high-speed communication routing short, with continuous ground references and controlled return paths beneath clock and serial signals. The integrated ADC is intended for mixed-signal acquisition, so isolate sensitive analog traces from digital switching activity and transceiver routing. Check the pin-description table for analog, digital, power, ground, reset, and programming assignments before assigning tracks or test points.

Validate startup sequencing, brownout behavior, and voltage tolerances for every 2.5 V, 3.3 V, or 5 V configuration used by the design. Include the peripheral current, analog conversion activity, communications loading, and ambient temperature when checking supply headroom. If the MCU sits near a regulator or actuator driver, control switching-node coupling into its supply pins and use local bulk capacitance to manage transient load steps.

Informations de conformité

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sans plomb
Unknown
Sans halogène
Unknown
Minerais de conflit
Unknown

The C8051F58x family is identified as an automotive and industrial microcontroller family, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified.

Recherches associées

C8051F584-IM datasheet C8051F584-IM datasheet pdf C8051F584-IM pinout C8051F584-IM 48-QFN footprint C8051F584-IM replacement C8051F584-IM equivalent C8051F584-IM cross reference C8051F584-IM vs C8051F581-IM C8051F584-IM vs C8051F500-IM Silicon Labs C8051F584-IM C8051F584-IM price C8051F584-IM stock C8051F584-IM automotive LIN CAN C8051F584-IM 50MHz 96KB

Composants & termes associés

Silicon Labs C8051F584-IM C8051F584-IMR C8051F581-IM C8051F505-IM C8051F500-IM C8051F584-IQ C8051F58x 8051 microcontroller 8-bit microcontroller CISC microcontroller mixed-signal microcontroller automotive microcontroller CAN 2.0 LIN 2.1 SPI UART I2C 12-bit ADC 48-QFN QFN package family surface-mount package exposed pad 50 MHz clock 96 KB flash memory 8 KB RAM
RFQ de devis rapide
Renseignez tous les détails — notre équipe commerciale vous répondra sous 24 heures
Référence Fabricant Boîtier QTY Prix cible Total
✓
Devis envoyé !

Nous répondrons à votre e-mail sous 24 heures

1
RFQ envoyée
2
Devis reçu
3
Commande passée
4
Paiement
5
Expédié
6
Livré
Voir les détails de la RFQ