Silicon Labs

C8051F814-GU - 25MHz 8-bit Flash MCU | Silicon Labs

N.º da peça: C8051F814-GU ✗ Fim de vida
3 V Vdss 24-QSOP Package 25 MHz Speed 8 KB (8K x 8) Memory
MOQ: 1 |

C8051F814-GU Visão geral

The Silicon Labs C8051F814-GU is an 8-bit C8051-family embedded microcontroller operating at up to 25 MHz, with 8 KB of Flash program memory, 512 bytes of RAM, and 17 I/O pins in a 24-QSOP surface-mount package. It combines a pipelined 8051 core with capacitive-touch support and an internal oscillator, making it suitable for compact control systems requiring embedded Flash, mixed-signal input capability, and modest processing performance.

An 8-bit microcontroller is a semiconductor device designed for embedded control tasks such as monitoring inputs, sequencing outputs, managing communications, and running application firmware. Within the product hierarchy, the C8051F814-GU is a Flash MCU, a mixed-signal microcontroller, and ultimately an embedded processing IC. Its 8051 instruction set and deterministic architecture are well suited to appliances, industrial interfaces, access controls, and compact control panels.

The device operates at up to 25 MHz and provides 8 KB, organized as 8K x 8, of Flash memory for program storage. Its on-chip RAM totals 512 x 8 bits, while 17 I/O pins provide connections to sensors, switches, indicators, and external control logic. The 24-QSOP package measures 3.90 mm in body width according to the listed package description, supporting compact, high-density PCB layouts.

The C8051 core uses a pipelined instruction architecture, improving effective execution throughput relative to a classic non-pipelined 8051 implementation. Integrated capacitive-touch capability supports buttons, sliders, and wheels, reducing the need for discrete touch-sensing hardware in suitable front-panel designs. The internal oscillator also reduces dependence on an external clock source when its frequency and timing requirements satisfy the application.

Typical uses include capacitive-control panels, building-access equipment, small industrial controllers, sensor-conditioning systems, and embedded appliances. Its 8-bit architecture is most effective when workloads involve modest control logic, low-to-moderate data rates, and compact firmware rather than heavy graphics, high-speed networking, or large real-time datasets.

PCB planning should preserve the 24-QSOP footprint and verify every signal against the manufacturer pin-description table before routing. Decoupling, oscillator startup, reset behavior, and exposed analog-capable pins should follow the recommended application circuit. Firmware development should also account for the limited 8 KB Flash and 512-byte RAM budgets.

This page organizes the verified electrical, memory, package, and sourcing details while adding application guidance, comparison criteria, and practical PCB considerations for engineers evaluating the C8051F814-GU or planning a controlled migration within the C8051F81x family.

Alternativas drop-in para C8051F814-GU — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com C8051F814-GU (mesmo formato e footprint) — diferindo em Package, Capacitive Touch Support, Core Architecture, Number of I/O Pins, Program Memory Size.

Silicon Labs
Program Memory Size: 16 KB Flash
Comparar com C8051F814-GU →
Silicon Laboratories
Package: 24-QSOP, 3.90 mm nominal body width
Capacitive Touch Support: Supported for buttons, sliders, and wheels
Core Architecture: Pipelined 8051
Comparar com C8051F814-GU →

C8051F818-GU

✅ Drop-In
📦 24-QSOP
24-package pins retained; program-memory and peripheral mix differ, so firmware validation is required

📋 Alternativa de referência (fora do catálogo)

C8051F815-GU

✅ Drop-In ⚠️ Especificações não verificadas
📦 24-QSOP
24 package pins and 25 MHz core retained; peripheral mix differs by 0 to 1 functional block

📋 Alternativa de referência (fora do catálogo)

C8051F816-GU

✅ Drop-In ⚠️ Especificações não verificadas
📦 24-QSOP
24 package pins and 25 MHz core retained; exact I/O and peripheral assignments require validation

📋 Alternativa de referência (fora do catálogo)

C8051F817-GU

✅ Drop-In ⚠️ Especificações não verificadas
📦 24-QSOP
24 package pins and 25 MHz core retained; memory and peripheral configuration must be checked

📋 Alternativa de referência (fora do catálogo)

C8051F814-GU Classificações máximas e características elétricas

Microcontroller Family C8051F81x
Architecture 8-bit 8051
Frequência máxima de clock 25 MHz
Flash Program Memory 8 KB (8K x 8)
RAM Size 512 bytes (512 x 8 bits)
Number of I/O Pins 17
Tensão de alimentação 3 V
Oscillator Type Internal
Core Architecture Pipelined 8051 instruction architecture
Capacitive Touch Support Yes
Encapsulamento 24-QSOP
Package Body Width 3.90 mm
Package Length 0.154 inch (3.90 mm body-width listing reference)
Tipo de montagem Surface mount
Number of Package Pins 24

Guia de Configuração de Pinos do C8051F814-GU 24

Configuração de pinos para C8051F814-GU (pacote 24). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 24 para C8051F814-GU

Nenhum dado detalhado de pinagem disponível para C8051F814-GU.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

C8051F814-GU é adequado para 6 aplicaçãos: Capacitive-Touch Control Panels, Access-Control Systems, Small Industrial Sensor Interfaces, Appliance User Interfaces, Embedded Communication Terminals, Portable Measurement Products.

🖥️

Capacitive-Touch Control Panels

The C8051F814-GU fits compact capacitive-control panels because its integrated touch capability supports buttons, sliders, and wheels while the 25 MHz 8051 core handles scanning, debouncing, and interface logic. The 24-QSOP package preserves board area in space-constrained front-panel assemblies. Its 8 KB Flash provides room for a focused user-interface application, and the 512-byte RAM can hold working state and short data buffers. A practical design should separate sensitive touch electrodes from noisy switching paths, verify the recommended grounding arrangement, and test detection across the complete enclosure. Because storage is limited, use compact firmware and confirm the final touch-channel count and acquisition timing against the manufacturer pin and peripheral tables.

🔒

Access-Control Systems

The C8051F814-GU is appropriate for credential readers, door-control modules, and compact access-control panels where an 8-bit controller must read switches, indicators, and communication lines while enforcing a defined control sequence. Its 25 MHz pipelined core provides deterministic instruction handling, and the 17 I/O pins offer a practical interface count for status LEDs, latch drivers, and user inputs. The internal oscillator can reduce external clock-component requirements in cost-sensitive designs. For security-sensitive installations, provide physical tamper detection, define safe relay states, and isolate external interfaces appropriately. Firmware should include input debouncing and fail-safe behavior rather than relying solely on nominal MCU timing. Validate the 3 V supply tolerance, startup behavior, and any field-programming requirements before production release.

🏭

Small Industrial Sensor Interfaces

The C8051F814-GU can serve as the local controller in a small industrial sensor interface by sampling digital sensors, converting selected analog inputs, applying thresholds, and forwarding status over a communications link. Its 512 bytes of RAM are suitable for compact measurement state but not large histories, while 8 KB of Flash supports concise protocol and control routines. The 24-QSOP package is useful when the interface board must fit behind a DIN-rail module or compact enclosure. Keep analog and switching returns separated, use local filtering near sensitive inputs, and maintain a defined reset state for every actuator output. The internal oscillator should be checked against the required timing tolerance for long measurement intervals. Industrial use also requires confirmation of the exact temperature range and compliance with the applicable environmental and safety requirements.

🔧

Appliance User Interfaces

The C8051F814-GU is well matched to appliance user interfaces that combine capacitive buttons, status indicators, and simple electromechanical control. Its 3 V operation supports low-voltage product designs, while the 17 I/O pins provide a practical balance between sensed controls and discrete outputs. At 25 MHz, the 8-bit core can execute a focused state machine without the overhead of a higher-complexity MCU. The 512-byte RAM is adequate for short UI state but requires disciplined allocation when multiple timers and display states share memory. Connect relays, motors, and lamps through appropriate driver stages rather than driving them directly from MCU pins. A production layout should include adequate supply decoupling, defined power-state behavior, and protection from motor transients. Firmware should handle stuck-button and prolonged-actuation cases before enabling appliance outputs.

🌐

Embedded Communication Terminals

The C8051F814-GU can support a compact communication terminal that handles local commands, status indicators, and a low-speed serial connection. Its 25 MHz pipelined 8051 core provides more effective instruction throughput than a classic non-pipelined core, which is useful for protocol parsing and buffer management within the device’s 8 KB Flash and 512-byte RAM limits. The 17 I/O pins can accommodate serial signals, configuration inputs, and fault outputs. Designers should avoid concurrent blocking routines that delay protocol timing, and should implement a bounded receive buffer to handle burst traffic safely. For an RS-485 or long-cable interface, use the appropriate transceiver and isolation rather than the MCU pins directly. Oscillator tolerance must be checked against the selected baud rate and environmental temperature range before treating the serial link as reliable.

📱

Portable Measurement Products

The C8051F814-GU is suitable for a portable measurement product that performs local thresholding, calibration storage, and result display without requiring a high-performance processor. The 8-bit core and 17 I/O pins support sensor inputs, switches, and a compact display, while the internal oscillator simplifies the clock design. Its 512-byte RAM is sufficient for short live measurements but limits buffering, so streaming applications should process data incrementally or use external storage. Analog-capable pins should follow the manufacturer recommendation for input range and grounding, and the PCB should minimize copper areas around sensitive nodes where appropriate. Battery-powered operation also makes quiescent behavior and shutdown-mode current important checks. Validate display updates, sensor settling time, calibration retention, and low-voltage behavior across the complete product supply range before production.

Resumo dos produtos recomendados

C8051F818-GU Related C8051F81x touch-capable MCU Usado em: Capacitive-Touch Control Panels, Access-Control Systems, Portable Measurement Products C8051F814-GU Silicon Labs Usado em: Capacitive-Touch Control Panels, Access-Control Systems, Small Industrial Sensor Interfaces, Appliance User Interfaces, Embedded Communication Terminals, Portable Measurement Products C8051F816-GU Related family control candidate Usado em: Small Industrial Sensor Interfaces C8051F815-GU Related appliance-control MCU Usado em: Appliance User Interfaces C8051F817-GU Related protocol-controller candidate Usado em: Embedded Communication Terminals
What is the operating voltage of C8051F814-GU?
The C8051F814-GU operates from a 3 V supply. According to the Silicon Labs C8051F814-GU datasheet, the device belongs to the C8051F81x mixed-signal Flash MCU family and combines an 8-bit pipelined 8051 core with 8 KB of Flash program memory. Because the complete electrical limits and operating-temperature boundaries are not reproduced in the product summary, use the manufacturer specifications table before finalizing the power architecture or applying the part outside a 3 V system.
How much Flash and RAM does C8051F814-GU have?
The C8051F814-GU provides 8 KB of Flash program memory and 512 bytes of RAM. The Flash is specified as 8K x 8 bits, while RAM is organized as 512 x 8 bits. According to the Silicon Labs product description, these resources suit compact embedded-control firmware rather than applications requiring large buffers or extensive local code storage. A migration within the same family should be checked for memory demand and peripheral differences before changing the part number.
What is the maximum clock frequency of C8051F814-GU?
The C8051F814-GU runs at up to 25 MHz and uses an internal oscillator. According to the Silicon Labs C8051F814-GU datasheet, its pipelined 8051 instruction architecture is designed to improve execution efficiency compared with a classic 8051 core. The internal clock arrangement can simplify board design by reducing external crystal and oscillator components, although power-up timing and any clock-dependent peripheral calculations should still be validated in the final firmware and layout.
Where can I download the C8051F814-GU datasheet PDF?
The C8051F814-GU datasheet PDF is available from the Silicon Laboratories document listing linked on this page. The manufacturer document identifies the mixed-signal ISP Flash MCU family and contains the authoritative pin assignments, electrical limits, memory organization, clock behavior, and peripheral descriptions. Use that document when assigning PCB tracks or writing low-level startup code, and use the pin-description table rather than relying on a package drawing alone to infer a complete 24-QSOP pinout.
Where is the C8051F814-GU pinout located?
The C8051F814-GU pinout is located in the Silicon Labs manufacturer datasheet under the package and pin-assignment information. The device is supplied in a 24-QSOP package with 17 I/O pins, so the package drawing alone is not sufficient to identify power, ground, reset, programming, oscillator, and general-purpose I/O functions. Assign each PCB net from the manufacturer pin-description table and preserve the exposed package geometry and pin-1 orientation when laying out the board.
What can replace the C8051F814-GU?
The closest drop-in candidates are C8051F818-GU and closely related C8051F81x-GU devices that retain the 24-QSOP footprint, but each replacement still requires firmware and peripheral review. No universal replacement can be declared solely from the package. Confirm Flash capacity, RAM, I/O assignments, clock behavior, analog functions, capacitive-touch channels, programming method, and temperature limits in the Silicon Labs documentation before approving a substitution.
What is the difference between C8051F814-GU and C8051F818-GU?
C8051F818-GU is a related C8051F81x device in the same 24-QSOP package family, but it may provide a different mix of flash, peripherals, or I/O functions than the C8051F814-GU. The C8051F814-GU is specifically listed with 8 KB of Flash, 512 bytes of RAM, 17 I/O pins, and a 25 MHz core. Treat C8051F818-GU as a migration candidate rather than an unconditional substitute until the manufacturer pin and peripheral tables have been compared line by line.
Is C8051F814-GU suitable for capacitive-touch panels?
Yes, the C8051F814-GU is suitable for suitable capacitive-touch interfaces because it includes capacitive-touch support for buttons, sliders, and wheels. Its 25 MHz 8-bit core can scan touch inputs and perform the associated control functions, while 8 KB of Flash and 512 bytes of RAM constrain application size and working memory. Validate electrode geometry, scan timing, noise immunity, and grounding in the complete human-interface environment rather than treating touch support as a guarantee of final panel performance.
Does C8051F814-GU need an external crystal?
The C8051F814-GU has an internal oscillator, so an external crystal is not mandatory for every implementation. The manufacturer lists the oscillator type as internal, allowing a simpler clock arrangement when timing requirements permit. A crystal or external clock source may still be appropriate when the system requires precise long-term timing, specific frequency output, or communication timing that cannot be met by the internal oscillator. Confirm clock tolerance and startup behavior against the datasheet.
Where can I buy C8051F814-GU and what is its price?
Use the “Request a Quote” form on this page to request C8051F814-GU availability, pricing, and lead time for the exact 24-QSOP ordering code. The device is listed in obsolete or hard-to-find channels, so its lifecycle position and quantity availability should be confirmed before committing a production BOM. Provide the target quantity, permitted date code, and packaging requirements so the quotation can reflect the precise configuration needed for assembly.
What is the lead time for C8051F814-GU?
The current lead time for C8051F814-GU should be requested through the “Request a Quote” form on this page. Because this exact ordering code is associated with an obsolete or hard-to-find lifecycle position, available stock may vary by quantity and packaging. Ask the supplier to confirm lot size, date code, test status, and traceability. Do not base a schedule on a generic family-level availability statement because the exact suffix and package must match the assembled design.
Is C8051F814-GU in stock?
Inventory for C8051F814-GU is confirmed through the “Request a Quote” form on this page. The exact MPN is listed by distributors, but its obsolete or hard-to-find status means visible listings do not guarantee a persistent stock pool. State the required order quantity, tube or reel preference, acceptable date code, and target delivery date. For new production designs, consider whether an actively supported family member is more appropriate than planning around a constrained legacy supply.
When should I choose C8051F814-GU over another C8051F81x device?
Choose the C8051F814-GU when an existing design specifically requires its 24-QSOP footprint, 3 V supply, 25 MHz core, 8 KB Flash, 512-byte RAM, 17 I/O pins, internal oscillator, and capacitive-touch capabilities. For a new design with different memory needs or peripheral requirements, select the family member that matches those requirements rather than forcing a footprint-compatible but electrically different part. Software development, validation, and lifecycle continuity should be considered alongside the PCB match.
Is C8051F814-GU suitable for industrial control applications?
The C8051F814-GU can be suitable for compact industrial-control tasks where the required logic fits 8 KB of Flash and 512 bytes of RAM and the operating limits suit the installation. Its 17 I/O pins support sensors, actuators, and human-interface inputs, while capacitive touch can simplify control panels. For safety-critical, extended-temperature, or electrically noisy environments, confirm the exact temperature grade, isolation strategy, transient protection, and compliance requirements before releasing the design.
What are the key specifications of C8051F814-GU that engineers should know?
The C8051F814-GU is a 3 V, 8-bit mixed-signal Flash MCU with a 25 MHz pipelined 8051 core, 8 KB program Flash, 512 bytes of RAM, 17 I/O pins, an internal oscillator, and capacitive-touch support in a 24-QSOP package. According to the Silicon Labs C8051F814-GU datasheet, these are the defining constraints for firmware sizing, timing, board routing, and application selection. Confirm the complete pin assignment, electrical limits, peripheral set, and temperature range from the manufacturer document.

Dados de referência de engenharia para C8051F814-GU — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the C8051F814-GU when maintaining an existing 24-QSOP design that depends on its 3 V supply, 25 MHz 8-bit core, 8 KB Flash, 512-byte RAM, 17 I/O pins, internal oscillator, and capacitive-touch functions. The same-family candidates can reduce redesign effort, but each must be checked against the manufacturer pin and peripheral tables because matching package dimensions do not guarantee identical multiplexing or peripheral behavior. Use C8051F818-GU as a migration candidate when its verified configuration satisfies the existing design, and evaluate C8051F815-GU, C8051F816-GU, or C8051F817-GU when their specific peripheral sets better match the application. For a new product, favor an actively supported device unless continuity with an existing C8051F814-GU board and firmware is more important than long-term supply assurance.

Comparação com alternativas

Parâmetro Este produto C8051F818-GU C8051F815-GU C8051F816-GU C8051F817-GU
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 24-QSOP 24-QSOP 24-QSOP 24-QSOP 24-QSOP
Architecture 8-bit 8051 8-bit C8051 family 8-bit C8051 family 8-bit C8051 family 8-bit C8051 family
Maximum Clock Frequency 25 MHz 25 MHz 25 MHz 25 MHz 25 MHz
Program Memory 8 KB (8K x 8) 8 KB 8 KB 8 KB 8 KB
RAM 512 bytes 512 bytes 512 bytes 512 bytes 512 bytes
Number of I/O Pins 17 17 17 17 17
Supply Voltage 3 V 3 V 3 V 3 V 3 V
Capacitive Touch Support Yes Yes Yes Yes Yes
Oscillator Type Internal Internal Internal Internal Internal

Principais diferenciais

  • Defined 24-QSOP integration for compact touch interfaces (vs C8051F818-GU)
  • Capacitive-touch support without a separate touch controller (vs C8051F816-GU)
  • Internal oscillator simplifies standard control designs (vs C8051F817-GU)

Notas de projeto

Assign every 24-QSOP connection from the manufacturer pin-description table and preserve the pin-1 orientation and land pattern. Place the device-side supply bypass capacitor close to the power and ground pins, with a short return path that avoids switching-current loops. Confirm whether unused analog-capable pins must be tied to a defined potential. Because this is a legacy 24-QSOP design, inspect pad geometry against the current assembly process rather than relying only on the package name.

Design the 3 V rail for both steady-state MCU demand and startup transients. Use local high-frequency bypass plus adequate bulk capacitance at the supply entry point, and keep regulator feedback routes away from touch-sensing and switching nodes. The internal oscillator simplifies clock design, but its tolerance and startup delay must be checked against communication timing and touch-scan periods. Verify brownout behavior and ensure all external actuators remain in a defined state during reset.

Do not treat a matching 24-QSOP footprint as proof of unconditional interchangeability. Before substituting a C8051F81x device, compare the complete pin list, power pins, ground pins, reset connection, oscillator pins, programming interface, capacitive-touch channels, analog functions, Flash size, RAM size, and interrupt assignments. Changes in peripheral muxing can silently alter a supposedly pin-compatible board, so compile and test the migration firmware on production-representative hardware.

For capacitive-touch layouts, keep touch electrodes away from switching nodes, high-current return paths, and noisy communication lines. Use the manufacturer's recommended electrode geometry and grounding arrangement, then validate sensitivity across the intended plastic enclosure, cable routing, humidity, and adjacent supply conditions. PCB cleanliness and conformal-coating requirements can materially change touch performance, so complete validation with the final mechanical assembly rather than only on a bare board.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

No explicit compliance declaration was identified for the exact C8051F814-GU ordering code.

Dados verificados em: 2026-11-19 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

C8051F814-GU datasheet C8051F814-GU specifications C8051F814-GU pinout C8051F814 datasheet pdf C8051F814-GU 24-QSOP C8051F814-GU 25MHz 8KB flash C8051F814-GU capacitive touch C8051F814-GU replacement C8051F814-GU equivalent C8051F814-GU vs C8051F818-GU C8051F814-GU price C8051F814-GU stock

Componentes & termos relacionados

Silicon Labs C8051F814-GU C8051F818-GU C8051F815-GU C8051F816-GU C8051F817-GU C8051F81x 8-bit microcontroller embedded microcontroller mixed-signal MCU Flash MCU 8051 core pipelined instruction architecture capacitive touch 24-QSOP SSOP-24 surface-mount package embedded control Flash program memory RAM internal oscillator industrial control access control appliance user interface sensor interface
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ